JB/T 6454-2008Heating resistance alloys - Technical requirements (English PDF)
发热电阻合金 技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 6454-2008 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
March 12, 2008
Implementation date
September 1, 2008
Scope
JB/T 6454-2008 is the English-translated version of 发热电阻合金 技术条件.
JB/T 6454-2008 is a recommended Chinese machinery industry standard giving the technical specification for heating resistance alloys. It sets out the requirements for these alloys together with the sampling, the test methods and the provisions for marking and packaging.
The alloys it applies to are the resistance alloys used in manufacturing the low-voltage heating elements and the current-limiting resistors of thermal overload relays, low-voltage circuit breakers and other electrical appliances.
The standard replaces JB/T 6454-1992 and is filed under the Chinese classification K14 and ICS 29.120.20. Among the standards it quotes are GB/T 228, GB/T 6146 and numerous parts of GB/T 5121, JB/T 6326 and JB/T 9548.
Found what you need?
Document preview — JB/T 6454-2008
National Standard of the People's Republic of China
- ICS
- 29.120.20
- Replacing
- JB/T 6454-1992
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 6454-2008 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 12 March 2008 and has been in force since 1 September 2008.
It replaces the earlier edition JB/T 6454-1992.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This standard is a recommended Chinese machinery industry standard giving the technical specification for heating resistance alloys. It sets out the requirements for these alloys together with the sampling, the test methods and the provisions for marking and packaging. The alloys it applies to are the resistance alloys used in manufacturing the low-voltage heating elements and the current-limiting resistors of thermal overload relays, low-voltage circuit breakers and other electrical appliances. The standard replaces JB/T 6454-1992 and is filed under the Chinese classification K14 and ICS 29.120.20. Among the standards it quotes are GB/T 228, GB/T 6146 and numerous parts of GB/T 5121, JB/T 6326 and JB/T 9548.
JB/T 6454-2008 falls under ICS 29.120.20, in the field of electrical engineering.
This catalogue holds 619 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 228
GB/T 5121.1
GB/T 5121.2
GB/T 5121.3
GB/T 5121.4
GB/T 5121.5
GB/T 5121.6
GB/T 5121.7
GB/T 5121.8
GB/T 5121.9
GB/T 5121.10
GB/T 5121.11
GB/T 5121.12
GB/T 5121.13
GB/T 5121.14
GB/T 5121.15
GB/T 5121.16
GB/T 5121.17
GB/T 5121.18
GB/T 5121.19
GB/T 5121.20
GB/T 5121.21
GB/T 5121.22
GB/T 5121.23
GB/T 5121.24
GB/T 5121.25
GB/T 5121.26
GB/T 5121.27
GB/T 5121.28
GB/T 6146
JB/T 6326.1
JB/T 6326.2
JB/T 6326.3
JB/T 6326.4
JB/T 6326.5
JB/T 6326.6
JB/T 6326.7
JB/T 6326.8
JB/T 6326.9
JB/T 9548.1
JB/T 9548.2
JB/T 9548.3
JB/T 9548.4
JB/T 9548.5
JB/T 9548.6
JB/T 9548.7
JB/T 9548.8
JB/T 9548.9
JB/T 9548.10
JB/T 9548.11
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Other editions:
JB/T 6454-1992 (earlier edition)
Standards on related subjects:
JB/T 8987-2017 — Technical requirements for silver-copper alloy wires (strips) for commutators
GB/T 3217-2013 — Permanent magnet (magnetically hard) materials -- Methods of measurement of magnetic properties
GB/T 24270-2009 — Method of measurement of temperature coefficient of magnetic properties of permanent magnetic materials
JB/T 8633-2017 — Technical requirements for wires for rivet-type electrical contacts
JB/T 9548.10-2015 — Methods for chemical analysis of iron-chromium-aluminium alloys - Part 10: Determination of sulfur
6 Classification and status
International classification (ICS): 29.120.20
Chinese Standard Classification (CCS): K 14
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 228Metallic materials - Tensile testing at ambient temperature
- GB/T 5121.1Methods for chemical analysis of copper and copper alloys -- Part 1: Determination of copper content
- GB/T 5121.2Methods for chemical analysis of copper and copper alloys -- Part 2: Determination of phosphorus content
- GB/T 5121.3Methods for chemical analysis of copper and copper alloys -- Part 3: Determination of lead content
- GB/T 5121.4Methods for chemical analysis of copper and copper alloys -- Part 4: Determination of carbon and sulfur content
- GB/T 5121.5Methods for chemical analysis of copper and copper alloys -- Part 5: Determination of nickel content
Similar standards
Editions of JB/T 6454
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 6454-2008 | Heating resistance alloys - Technical requirements | current edition | Current |
| JB/T 6454-1992 | Heating resistance alloys - Technical requirements | previous edition | Superseded |
This page sells the current edition, JB/T 6454-2008. Earlier editions are listed for reference only.
How to Download JB/T 6454-2008
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 228.1-2010 — Metallic materials - Tensile testing - Part 1: Method of test at room temperature
GB/T 228.1-2021 — Metallic Materials — Tensile Testing — Part 1: Method of Test at Room Temperature
GB/T 228-1987 — Metallic materials--Tensile testing
JB/T 6454-2008
$195.00