Valid

JB/T 7598-2008Copper-chromium-zirconium alloys for resistance welding electrodes (English PDF)

电阻焊电极用铜-铬-锆合金

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 7598-2008 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

February 1, 2008

Implementation date

July 1, 2008

Scope

JB/T 7598-2008 is the English-translated version of 电阻焊电极用铜-铬-锆合金.

Copper-chromium-zirconium alloys for resistance welding electrodes are the subject of JB/T 7598-2008, a recommended Chinese machinery industry standard. For the alloy it lays down the requirements, the sampling, the inspection methods and the content of signs, labels and packaging.

The standard applies to copper-chromium-zirconium alloy used in the manufacture of resistance welding electrodes, in plate, rod and block form or in other shapes.

It was issued by the Ministry of Industry and Information Technology, carries Chinese classification K14 and international classification 29.120.20, and takes the place of JB/T 7598-1994.

Among the standards it quotes are GB/T 230.1, GB/T 3048.2, JB/T 4281-1999 and several parts of JB/T 9552.

Found what you need?

Document preview — JB/T 7598-2008

National Standard of the People's Republic of China

ICS
29.120.20
Replacing
JB/T 7598-1994

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Technical requirements
  • 4.1 General requirements
  • 4.2 Model designation
  • 6 Test methods
  • 6.1 Factory inspection
  • 6.2 Type inspection
  • 7 Inspection rules
  • 8 Marking, packaging, transportation and storage
  • 8.1 Marking
  • 8.2 Packaging

1 Foreword

JB/T 7598-2008 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 1 February 2008 and has been in force since 1 July 2008.

It replaces the earlier edition JB/T 7598-1994.

The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

Copper-chromium-zirconium alloys for resistance welding electrodes are the subject of JB/T 7598-2008, a recommended Chinese machinery industry standard. For the alloy it lays down the requirements, the sampling, the inspection methods and the content of signs, labels and packaging. The standard applies to copper-chromium-zirconium alloy used in the manufacture of resistance welding electrodes, in plate, rod and block form or in other shapes. It was issued by the Ministry of Industry and Information Technology, carries Chinese classification K14 and international classification 29.120.20, and takes the place of JB/T 7598-1994. Among the standards it quotes are GB/T 230.1, GB/T 3048.2, JB/T 4281-1999 and several parts of JB/T 9552.

JB/T 7598-2008 falls under ICS 29.120.20, in the field of electrical engineering.

This catalogue holds 619 other JB/T standards in that field.

In this catalogue, JB/T standards carry edition years from 1967 to 2026.

3 Normative references

GB/T 230.1

GB/T 3048.2

JB/T 4281-1999 — Materials for resistance welding electrodes and ancillary equipment

JB/T 9552.1

JB/T 9552.2

JB/T 9552.3

JB/T 9552.4

JB/T 9552.5

JB/T 9552.6

JB/T 9552.7

JB/T 9552.8

JB/T 9552.9

4 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

5 Related standards

Other editions:

JB/T 7598-1994 (earlier edition)

Standards on related subjects:

JB/T 8987-2017 — Technical requirements for silver-copper alloy wires (strips) for commutators

GB/T 3217-2013 — Permanent magnet (magnetically hard) materials -- Methods of measurement of magnetic properties

GB/T 24270-2009 — Method of measurement of temperature coefficient of magnetic properties of permanent magnetic materials

JB/T 8633-2017 — Technical requirements for wires for rivet-type electrical contacts

JB/T 9548.10-2015 — Methods for chemical analysis of iron-chromium-aluminium alloys - Part 10: Determination of sulfur

6 Classification and status

International classification (ICS): 29.120.20

Chinese Standard Classification (CCS): K 14

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Normative references

Similar standards

Editions of JB/T 7598

EditionTitleRevisionStatus
JB/T 7598-2008Copper-chromium-zirconium alloys for resistance welding electrodescurrent editionCurrent
JB/T 7598-1994Copper-chromium-zirconium alloys for resistance welding electrodesprevious editionSuperseded

This page sells the current edition, JB/T 7598-2008. Earlier editions are listed for reference only.

How to Download JB/T 7598-2008

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 7598-2008

$85.00