JB/T 7117-2008Technical requirements for high resistance electrical heating alloy wires (diameter less than 0.20 mm) (English PDF)
高电阻电热合金丝技术条件(Φ<0.20mm)
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 7117-2008 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
March 12, 2008
Implementation date
September 1, 2008
Scope
JB/T 7117-2008 is the English-translated version of 高电阻电热合金丝技术条件(Φ<0.20mm).
JB/T 7117-2008 is a recommended Chinese machinery industry standard that carries the technical requirements for high-resistance alloy wire for electrical heating, in diameters below 0.20 mm.
Wire of that fine gauge is the material the requirements are written for, the diameter limit being set in the title itself. The standard is filed under Chinese classification K14 and international classification 29.120.20, and the Ministry of Industry and Information Technology is the issuing body.
It takes the place of JB/T 7117-1993. Among the standards it quotes are GB/T 228 and GB/T 6146, together with the parts JB/T 6326.1, JB/T 6326.2, JB/T 6326.3, JB/T 6326.4 and JB/T 6326.5.
Found what you need?
Document preview — JB/T 7117-2008
National Standard of the People's Republic of China
- ICS
- 29.120.20
- Replacing
- JB/T 7117-1993
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 7117-2008 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 12 March 2008 and has been in force since 1 September 2008.
It replaces the earlier edition JB/T 7117-1993.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This standard is a recommended Chinese machinery industry standard that carries the technical requirements for high-resistance alloy wire for electrical heating, in diameters below 0.20 mm. Wire of that fine gauge is the material the requirements are written for, the diameter limit being set in the title itself. The standard is filed under Chinese classification K14 and international classification 29.120.20, and the Ministry of Industry and Information Technology is the issuing body. It takes the place of JB/T 7117-1993. Among the standards it quotes are GB/T 228 and GB/T 6146, together with the parts JB/T 6326.1, JB/T 6326.2, JB/T 6326.3, JB/T 6326.4 and JB/T 6326.5.
JB/T 7117-2008 falls under ICS 29.120.20, in the field of electrical engineering.
This catalogue holds 619 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 228
GB/T 6146
JB/T 6326.1
JB/T 6326.2
JB/T 6326.3
JB/T 6326.4
JB/T 6326.5
JB/T 6326.6
JB/T 6326.7
JB/T 6326.8
JB/T 6326.9
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Other editions:
JB/T 7117-1993 (earlier edition)
Standards on related subjects:
JB/T 8987-2017 — Technical requirements for silver-copper alloy wires (strips) for commutators
GB/T 3217-2013 — Permanent magnet (magnetically hard) materials -- Methods of measurement of magnetic properties
GB/T 24270-2009 — Method of measurement of temperature coefficient of magnetic properties of permanent magnetic materials
JB/T 8633-2017 — Technical requirements for wires for rivet-type electrical contacts
JB/T 9548.10-2015 — Methods for chemical analysis of iron-chromium-aluminium alloys - Part 10: Determination of sulfur
6 Classification and status
International classification (ICS): 29.120.20
Chinese Standard Classification (CCS): K 14
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 228Metallic materials - Tensile testing at ambient temperature
- GB/T 6146Test method for resistivity of precision resistance alloys
- JB/T 6326.1Methods for chemical analysis of nickel-chromium and nickel-chromium-iron alloys - Part 1: Determination of nickel
- JB/T 6326.2Methods for chemical analysis of nickel-chromium and nickel-chromium-iron alloys - Part 2: Determination of chromium
- JB/T 6326.3Methods for chemical analysis of nickel-chromium and nickel-chromium-iron alloys - Part 3: Determination of silicon
- JB/T 6326.4Methods for chemical analysis of nickel-chromium and nickel-chromium-iron alloys - Part 4: Determination of iron
Similar standards
Editions of JB/T 7117
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 7117-2008 | Technical requirements for high resistance electrical heating alloy wires (diameter less than 0.20 mm) | current edition | Current |
| JB/T 7117-1993 | Technical requirements for high resistance electrical heating alloy wires (diameter less than 0.20 mm) | previous edition | Superseded |
This page sells the current edition, JB/T 7117-2008. Earlier editions are listed for reference only.
How to Download JB/T 7117-2008
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 228.1-2010 — Metallic materials - Tensile testing - Part 1: Method of test at room temperature
GB/T 228.1-2021 — Metallic Materials — Tensile Testing — Part 1: Method of Test at Room Temperature
GB/T 228-1987 — Metallic materials--Tensile testing
JB/T 7117-2008
$105.00