GB/T 45906.9-2025Substation secondary system - Part 9: Construction specifications (English PDF)
变电站二次系统 第9部分:建设规范
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 45906.9-2025 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
August 1, 2025
Implementation date
February 1, 2026
Scope
GB/T 45906.9-2025 is the English-translated version of 变电站二次系统 第9部分:建设规范.
GB/T 45906.9-2025 is the Chinese standard "Substation secondary system - Part 9: Construction specifications". Its scope clause reads: This document specifies the overall requirements, design principles, process control and technical requirements for substation secondary system construction.
This document applies to the construction, operation, maintenance and overhaul of substation secondary systems.
Found what you need?
Document preview — GB/T 45906.9-2025
National Standard of the People's Republic of China
- ICS
- 29.240.10
- Classification
- F 20
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Preface
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 Abbreviations
- 5 General Requirements
- 6 Design
- 6.1 General requirements
- 6.2 System Architecture
- 6.3 Device Configuration
- 6.4 Master-Substation Information Interaction
- 6.5 Secondary circuit requirements
- 6.6 Power Requirements
- 6.7 Equipment Layout
- 7 Installation
- 7.1 General requirements
- 7.2 Process Control
- 7.3 Installation process requirements
- 8 Debugging
- 8.1 General requirements
- 8.2 Process Control
- 8.3 Debugging Project Requirements
- 9 Acceptance
- 9.1 General requirements
- 9.2 Process Control
- 9.3 Acceptance Project Requirements
1 Scope
This document specifies the overall requirements, design principles, process control and technical requirements for substation secondary system construction.
This document applies to the construction, operation, maintenance and overhaul of substation secondary systems.
2 Normative references
The contents of the following documents constitute the essential clauses of this document through normative references in this document.
For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to
This document.
GB/T 2887 General Specification for Computer Sites
GB/T 7261 Basic test methods for relay protection and safety automatic devices
GB 8897.4 Primary batteries Part 4.Safety requirements for lithium batteries
GB/T 14285 Technical Specification for Relay Protection and Safety Automatic Devices
GB/T 17215.211 Electrical measuring equipment (AC) General requirements, tests and test conditions Part 11.Measuring equipment
GB/T 17215.301 Particular requirements for electrical measuring equipment (AC) Part 1.Multifunctional energy meters
GB 20840.7 Transformers Part 7.Electronic voltage transformers
GB 20840.8 Instrument transformers Part 8.Electronic current transformers
GB 23864 Fireproof sealing materials
GB/T 36050 Basic provisions for time synchronization of power systems
GB/T 36283 General technical requirements for secondary compartments of intelligent substations
GB/T 36572 Guidelines for Cybersecurity Protection of Power Monitoring Systems
GB 38755 Guidelines for Safety and Stability of Power Systems
GB 50169 Specification for construction and acceptance of grounding devices for electrical installation projects
GB 50171 Specification for the construction and acceptance of panels, cabinets and secondary circuit wiring for electrical installation projects
GB 50172 Specification for Construction and Acceptance of Storage Batteries for Electrical Installation Engineering
GB 50217 Design Standard for Power Engineering Cables
GB/T 50976 Specification for installation and acceptance of relay protection and secondary circuits
GB/T 51420 Intelligent Substation Project Commissioning and Acceptance Standard
GB/T 45906.1 Substation secondary systems Part 1.General requirements
GB/T 45906.2 Substation secondary systems Part 2.Data and models
GB/T 45906.3 Substation secondary system Part 3.Communication message specification
GB/T 45906.4 Substation secondary systems Part 4.Network security protection
GB/T 45906.5 Substation secondary systems Part 5.Protection, control and related equipment
GB/T 45906.6 Substation secondary systems Part 6.Station monitoring system
GB/T 45906.7 Substation secondary systems Part 7.Centralized monitoring system
GB/T 45906.8 Substation secondary system Part 8.Prevention of electrical operation errors
GB/T 36050 | GB/T 36278 | GB/T 33592 | GB/T 45906.3 | GB/T 45906.2 | GB/T 45906.1 | […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 2887General specification for computer field
- GB/T 7261Basic test methods for protection relays and security automatic equipment
- GB 8897.4Primary batteries -- Part 4: Safety of lithium batteries
- GB/T 14285Technical code for relaying protection and security automatic equipment
- GB/T 17215.211Electricity metering equipment(AC) - General requirements, tests and test conditions - Part 11: Metering equipment
- GB/T 17215.301Electricity metering equipment (AC) - Particular requirements - Part 1: Multi-function electricity meters
GB 20840.7 · GB 20840.8 · GB 50169 · GB 50171 · GB 50172
Editions of GB/T 45906.9
| Edition | Title | Revision | Status |
|---|---|---|---|
| GB/T 45906.9-2025 | Substation secondary system - Part 9: Construction specifications | current edition | Current |
This page sells the current edition, GB/T 45906.9-2025. Earlier editions are listed for reference only.
How to Download GB/T 45906.9-2025
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 23864-2023 — Firestop material
GB 38755-2019 — Code on security and stability for power system
GB 50217-2018 — Standard for design of cables of electric power engineering
Secure payment via Stripe
Payments accepted
GB/T 45906.9-2025
$195.00