GB/T 36125-2018Vehicle for passenger with reduced mobility (English PDF)
行动不便人员运送车
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 36125-2018 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
May 14, 2018
Implementation date
December 1, 2018
Scope
GB/T 36125-2018 is the English-translated version of 行动不便人员运送车.
GB/T 36125-2018 covers vehicles built to carry passengers with reduced mobility, meaning people who have difficulty getting on and off a vehicle because of disability, illness or old age, most often wheelchair users.
It applies to M1 and M2 special-purpose vehicles fitted with a wheelchair access device or an automatic boarding seat, and M3 vehicles may refer to it. The standard sets the requirements, markings, test methods, inspection rules, user manual, vehicle documents, transport and storage, with a normative annex on the label.
It relies on standards for vehicle dimensions and masses, seat belts and their anchorages, seat strength, wheelchairs and the type testing of special vehicles. It is intended for vehicle manufacturers and test bodies, was issued on 14 May 2018 and has applied since 1 December 2018.
Found what you need?
Document preview — GB/T 36125-2018
National Standard of the People's Republic of China
- ICS
- 43.160
- Classification
- T 59
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 Requirements
- 5 logo
- 6 Test method
- 7 Inspection rules
- 8 User Manual
- 9 Car documentation, transportation, storage
- Appendix A (Normative) Label
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
1 Scope
This standard specifies the definition, requirements, signs, test methods, inspection rules, instructions for use and accompanying vehicles for vehicles with reduced mobility. Parts, transportation, storage.
This standard is applicable to M1 and M2 special vehicles for transporting people with reduced mobility. M3 vehicles can be referred to.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this document. For undated references, the latest edition (including all amendments) applies to this document.
GB 1589 Car, trailer and car train profile size, axle load and mass limit
GB/T 3730.1 Terms and definitions for types of cars and trailers
GB 7258 Motorcycle Operation Safety Technical Conditions
GB/T 9969 General guidelines for the use of industrial products
GB/T 12673 main size measurement method for automobiles
GB/T 12674 car mass (weight) parameter determination method
GB 13094 passenger car structural safety requirements
GB/T 13800 manual wheelchair
GB 14166 Seat belts for restraints, restraint systems, child restraint systems and ISO FIX child restraint systems for motor vehicles
GB 14167 car seat belt mounting fixed point, ISO FIX fixed point system and pull-up belt fixing point
GB 15083 Car seat, seat fixing device and headrest strength requirements and test methods
GB/T 15089 Motor vehicle and trailer classification
GB/T 18029 (all parts) wheelchair
GB/T 30038-2013 Road vehicles electrical and electronic equipment protection level (IP code)
QC/T 252 special vehicle type test procedure
3 Terms and definitions
The following terms and definitions as defined in GB/T 15089 and GB/T 3730.1 apply to this document.
3.1 Passenger with reduced mobility
Walking due to disability, illness (including physical injury, mental retardation, visual impairment, hypoplasia leading to physical deformity) or old and weak Inconvenience, people who have difficulty getting on and off the vehicle.
Note: Generally refers to people who travel by wheelchair.
3.2 Reduced mobility personnel transport vehicle
A passenger car equipped with a wheelchair accessible device for people with reduced mobility or an automatic boarding seat for people with reduced mobility.
Note: Also known as the Fushun car.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB 1589Limits of dimensions, axle load and masses for motor vehicles, trailers and combination vehicles
- GB/T 3730.1Terms and definitions of motor vehicles, trailers and combination vehicle— Part 1: Types
- GB 7258Technical specifications for safety of power-driven vehicles operating on roads
- GB/T 9969General principles for preparation of instructions for use of industrial products
- GB/T 12673Motor vehicle main dimensions measurement method
- GB/T 12674Motor vehicles, trailers and combination vehicles mass parameters measurement method
Similar standards
How to Download GB/T 36125-2018
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 13094-2017 — The safety requirements for bus construction
GB 13094-2025 — Safety requirements for bus construction
GB 14166-2024 — Safety-belts and restraint systems for occupants of power-driven vehicles
Secure payment via Stripe
Payments accepted
GB/T 36125-2018
$215.00