GB/T 25694-2021Earth-moving machinery - Skid-steer loaders (English PDF)
土方机械 滑移转向装载机
This is a limited preview
Buy now to download the full PDF (17 pages)
Need quotation for your management?
Get a formal quotation for GB/T 25694-2021 in 30 minutes.
Issued by
State Administration for Market Regulation; Standardization Administration of China
Level / Type
National · Recommended
Issue date
December 31, 2021
Implementation date
July 1, 2022
Scope
GB/T 25694-2021 is the English-translated version of 土方机械 滑移转向装载机.
GB/T 25694-2021 is the Chinese national standard on earth-moving machinery - skid-steer loaders, in the field of materials handling equipment.
The /T suffix marks it as a recommended standard: it is not compulsory by itself, but it becomes binding as soon as a contract, a tender or a customer specification calls it up - which in practice is how most foreign buyers meet it.
It was issued on 31 December 2021 by the State Administration for Market Regulation; Standardization Administration of China, and has been in force since 1 July 2022.
Classification: ICS 53.100, CCS P97. This page is published from the official record of the standard held by the Chinese standards administration: the identification, the dates, the classification and the issuing body are taken from there.
The clause text, the tables and the numeric limits are in the document itself, which is delivered complete in English translation.
Found what you need?
Document preview — GB/T 25694-2021
National Standard of the People's Republic of China
- ICS
- 53.100
- Classification
- P97
Issued by: State Administration for Market Regulation; Standardization Administration of China
Contents
- 1 Scope
- 2 Normative reference documents
- 3 Terms and definitions
- 4 Classification
- 5 Technical requirements
- 6 Test methods
- 7 Inspection rules
- 8 Marking. Packaging, transport and storage
Foreword
This document specifies the classification, requirements, test methods, inspection rules ﹑ marking, packaging, transport and storage of skid steer loaders. This document applies to tyre or tracked skid steer loaders (hereinafter referred to as skid steer loaders) as defined in GB/T 8498.
1 Scope
This document specifies the classification, requirements, test methods, inspection rules ﹑ marking, packaging, transport and storage of skid steer loaders. This document applies to tyre or tracked skid steer loaders (hereinafter referred to as skid steer loaders) as defined in GB/T 8498.
2 Normative reference documents
The contents of the following documents constitute the essential provisions of this document through the normative references in the text. Among them, note the date of the cited documents, only the date of the corresponding version applicable to this document; do not note the date of the cited documents, the latest version (including all the revision of the list) applicable to this document.
GB/T 3766 General rules and safety requirements for hydraulic drive systems and their components
GB/T 7935 General technical conditions for hydraulic components
GB/T 8419 Laboratory evaluation of driver's seat vibration in earthmoving machinery
2 Normative reference documents
The contents of the following documents constitute the essential provisions of this document through the normative references in the text. Among them, note the date of the cited documents, only the date of the corresponding version applicable to this document; do not note the date of the cited documents, the latest version (including all the revision of the list) applicable to this document.
GB/T 3766 General rules and safety requirements for hydraulic drive systems and their components
GB/T 7935 General technical conditions for hydraulic components
GB/T 8419 Laboratory evaluation of driver's seat vibration in earthmoving machinery
3 Terms and definitions
The terms and definitions defined in GB/T 8498,GB/T 25602,GB/T 25604 are applicable to this document.
3 Terms and definitions
The terms and definitions defined in GB/T 8498,GB/T 25602,GB/T 25604 are applicable to this document.
4.1 Type
Skid steer loaders are classified according to the mode of travel:
tyre skid steer loaders
Crawler skid steer loaders.
4.1 Type
Skid steer loaders are classified according to the mode of travel:
tyre skid steer loaders
Crawler skid steer loaders.
4.2 Type
The type of skid steer loader shall be in accordance with JB/T 9725 or as determined by the manufacturer.
4.2 Type
The type of skid steer loader shall be in accordance with JB/T 9725 or as determined by the manufacturer.
4.3 Parameters
4.3 Parameters
4.3.1 Basic parameters
The basic parameters of the skid steer loader are the rated power of the engine, the rated working load and the working mass, see Appendix A.
4.3.1 Basic parameters
The basic parameters of the skid steer loader are the rated power of the engine, the rated working load and the working mass, see Appendix A.
4.3.2 Main parameters
A list of the main parameters of the skid steer loader is given in Appendix A.
4.3.2 Main parameters
A list of the main parameters of the skid steer loader is given in Appendix A.
5.1 General requirements
5.1.1 The skid steer loader shall be able to operate normally under environmental conditions of -15°C to +40°C and an altitude of not more than 2 000 m.
5.1.2 The connection of the skid-steer loader attachment shall conform to the provisions of GB/T25619.
5.1.3 The assembly quality of the skid steer loader shall conform to the provisions of JB/T 5945.
5.1.4 The appearance painting quality of the skid steer loader shall conform to the provisions of JB/T 5946.
5.1.5 The hydraulic system and hydraulic components for the skid steer loader shall conform to the provisions of GB/T 3766 and GB/T 7935.
5.1.6 Diesel engines for skid steer loaders shall conform to the provisions of JB/T 4198.1.
5.1.7 The capacity of the fuel tank for the skid steer loader shall ensure that its continuous operating time is not less than 8 h.
5.1.8 The preparation of the driver's manual shall comply with the provisions of GB/T 25622.
5.1 General requirements
5.1.1 The skid steer loader shall be able to operate normally under environmental conditions of -15°C to +40°C and an altitude of not more than 2 000 m.
5.1.2 The connection of the skid-steer loader attachment shall conform to the provisions of GB/T25619.
5.1.3 The assembly quality of the skid steer loader shall conform to the provisions of JB/T 5945.
5.1.4 The appearance painting quality of the skid steer loader shall conform to the provisions of JB/T 5946.
5.1.5 The hydraulic system and hydraulic components for the skid steer loader shall conform to the provisions of GB/T 3766 and GB/T 7935.
5.1.6 Diesel engines for skid steer loaders shall conform to the provisions of JB/T 4198.1.
5.1.7 The capacity of the fuel tank for the skid steer loader shall ensure that its continuous operating time is not less than 8 h.
5.1.8 The preparation of the driver's manual shall comply with the provisions of GB/T 25622.
5.2 Performance requirements
5.2.1 The hydraulic system fluid solid particle contamination level of the skid steer loader should not exceed -/18/15 as stipulated in GB/T 14039-2002.
5.2.2 The whole machine of the skid steer loader shall be free from leakage when it leaves the factory.
5.2.3 The settlement of the hydraulic cylinder of the skid steer loader shall comply with the provisions of Table 1.
5.2 Performance requirements
5.2.1 The hydraulic system fluid solid particle contamination level of the skid steer loader should not exceed -/18/15 as stipulated in GB/T 14039-2002.
5.2.2 The whole machine of the skid steer loader shall be free from leakage when it leaves the factory.
5.2.3 The settlement of the hydraulic cylinder of the skid steer loader shall comply with the provisions of Table 1.
5.3 Safety, environmental protection and comfort requirements
5.3.1 The rated working load and ultimate tipping load of the skid steer loader shall conform to the provisions of GB25684.3 and GB/T 10175.1. 5.3.2 The sound power level of the noise emitted from the outside of the skid steer loader and the sound pressure level of the noise emitted from the driver's position shall conform to the provisions of GB 16710.
5.3.3 The vibration performance of the driver's seat for your skid steer loader shall conform to the provisions of GB/T 8419.
5.3.4 The exhaust pollutants of diesel engines for skid steer loaders shall comply with the provisions of GB 20891.
5.3.5 skid steer loader driver manipulation device layout should comply with the provisions of GB/T 21935, manipulation force should be consistent with the provisions of GB/T 8595; skid steer loader with front access should also comply with the following provisions: skid steer loader linkage lifting and lowering, machine walking and hydraulic manipulation of ancillary devices (such as multi-purpose bucket) and other manipulation devices, when the driver leaves or enters the driver's operating room They should be automatically locked (e.g. with a safety lever) or automatically inoperative when the driver leaves or enters the driver's compartment.
5.3.6 The braking system of your tyre skid steer loader should comply with the provisions of GB/T 21152, and the braking system of the tracked skid steer loader should comply with the provisions of GB/T 19929.
5.3.7 The driver's view of the skid steer loader should be in accordance with the provisions of GB/T 16937.
5.3.8 The signal and external lighting device of the skid steer loader should comply with the provisions of GB/T 20418. 5.3.9 The forward and reverse alarm sound of the skid steer loader should comply with the provisions of GB/T 21155. 5.3.10 The access device of the skid steer loader should comply with the provisions of GB/T 17300.
5.3.11 Skid steer loaders with front access guards should be equipped with side guards to prevent the driver from sitting in the operating position to extend his limbs between the side arm and the fixed parts of the machine to be pinched. The guards should comply with the provisions of GB/T 25607. Protective devices for the lower part of the lower limbs should be located within the reachable area specified in GB/T 21935 and at a minimum height of 200 mm from the floor of the driver's cab.
5.3.12 For skid steer loaders equipped with roll-over protective structures (ROPS), the ROPS shall comply with the provisions of GB/T 17922. For overhead skid steer loaders that are not required to be equipped with a ROPS, the ROPS fixing points can be reserved. For skid steer loaders with multiple working devices, the design of the ROPS should take into account the working mass under the heaviest configuration specified by the manufacturer.
5.3.13 Skid steer loaders used in situations where there is a risk of falling objects should be designed for the installation of Falling Object Protection Structures (FOPS), which should comply with the provisions of GB/T 17771.
5.3.14 Skid steer loaders should be labelled with a safety label, which should comply with the provisions of GB 20178.
5.3.15: Skid steer loaders shall comply with the applicable mandatory provisions in GB 25684.1 and GB 25684.3.
5.3.16: Skid steer loaders should comply with the applicable recommended provisions in GB 25684.1 and GB 25684.3.
5.3 Safety, environmental protection and comfort requirements
5.3.1 The rated working load and ultimate tipping load of the skid steer loader shall conform to the provisions of GB25684.3 and GB/T 10175.1. 5.3.2 The sound power level of the noise emitted from the outside of the skid steer loader and the sound pressure level of the noise emitted from the driver's position shall conform to the provisions of GB 16710.
5.3.3 The vibration performance of the driver's seat for your skid steer loader shall conform to the provisions of GB/T 8419.
5.3.4 The exhaust pollutants of diesel engines for skid steer loaders shall comply with the provisions of GB 20891.
5.3.5 skid steer loader driver manipulation device layout should comply with the provisions of GB/T 21935, manipulation force should be consistent with the provisions of GB/T 8595; skid steer loader with front access should also comply with the following provisions: skid steer loader linkage lifting and lowering, machine walking and hydraulic manipulation of ancillary devices (such as multi-purpose bucket) and other manipulation devices, when the driver leaves or enters the driver's operating room They should be automatically locked (e.g. with a safety lever) or automatically inoperative when the driver leaves or enters the driver's compartment.
5.3.6 The braking system of your tyre skid steer loader should comply with the provisions of GB/T 21152, and the braking system of the tracked skid steer loader should comply with the provisions of GB/T 19929.
5.3.7 The driver's view of the skid steer loader should be in accordance with the provisions of GB/T 16937.
5.3.8 The signal and external lighting device of the skid steer loader should comply with the provisions of GB/T 20418. 5.3.9 The forward and reverse alarm sound of the skid steer loader should comply with the provisions of GB/T 21155. 5.3.10 The access device of the skid steer loader should comply with the provisions of GB/T 17300.
5.3.11 Skid steer loaders with front access guards should be equipped with side guards to prevent the driver from sitting in the operating position to extend his limbs between the side arm and the fixed parts of the machine to be pinched. The guards should comply with the provisions of GB/T 25607. Protective devices for the lower part of the lower limbs should be located within the reachable area specified in GB/T 21935 and at a minimum height of 200 mm from the floor of the driver's cab.
5.3.12 For skid steer loaders equipped with roll-over protective structures (ROPS), the ROPS shall comply with the provisions of GB/T 17922. For overhead skid steer loaders that are not required to be equipped with a ROPS, the ROPS fixing points can be reserved. For skid steer loaders with multiple working devices, the design of the ROPS should take into account the working mass under the heaviest configuration specified by the manufacturer.
5.3.13 Skid steer loaders used in situations where there is a risk of falling objects should be designed for the installation of Falling Object Protection Structures (FOPS), which should comply with the provisions of GB/T 17771.
5.3.14 Skid steer loaders should be labelled with a safety label, which should comply with the provisions of GB 20178.
5.3.15: Skid steer loaders shall comply with the applicable mandatory provisions in GB 25684.1 and GB 25684.3.
5.3.16: Skid steer loaders should comply with the applicable recommended provisions in GB 25684.1 and GB 25684.3.
6 Test methods
6.1 The determination of the engine power of the skid steer loader is in accordance with the provisions of GB/T 16936.
6.2 Determination of the digging force of the skid steer loader according to the provisions of GB/T10175.2.
6.3 The determination of the rated working load and ultimate tipping load of the skid steer loader according to GB 25684.3 and GB/T 10175.1. 6.4 The determination of the sound power level of the skid steer loader according to the provisions of GB/T25614.
6.5 Skid steer loader driver position emission sound pressure level determination according to the provisions of GB/T25615.
6.6 Skid-steer loader exhaust pollutant determination according to the provisions of GB20891.
6.7 tyre skid-steer loader braking system according to the provisions of GB/T 21152, tracked skid-steer loader braking system according to the provisions of GB/T19929 or GB/T 21152.
6.8 skid steer loader traveling sound alarm device and the determination of the front horn according to the provisions of GB/T21155.
6 Test methods
6.1 The determination of the engine power of the skid steer loader is in accordance with the provisions of GB/T 16936.
6.2 Determination of the digging force of the skid steer loader according to the provisions of GB/T10175.2.
6.3 The determination of the rated working load and ultimate tipping load of the skid steer loader according to GB 25684.3 and GB/T 10175.1. 6.4 The determination of the sound power level of the skid steer loader according to the provisions of GB/T25614.
6.5 Skid steer loader driver position emission sound pressure level determination according to the provisions of GB/T25615.
6.6 Skid-steer loader exhaust pollutant determination according to the provisions of GB20891.
6.7 tyre skid-steer loader braking system according to the provisions of GB/T 21152, tracked skid-steer loader braking system according to the provisions of GB/T19929 or GB/T 21152.
6.8 skid steer loader traveling sound alarm device and the determination of the front horn according to the provisions of GB/T21155.
7.1 Factory inspection
7.1.1 skid steer loader should be the manufacturer's quality inspection department inspection before leaving the factory, and should be accompanied by product quality qualification documents or marks.
7.1.2: Skid steer loader factory inspection items can be in accordance with the provisions of Table 1.
7.1.3 The factory inspection programme shall be determined by the manufacturer or by mutual agreement between supply and demand.
7.1 Factory inspection
7.1.1 skid steer loader should be the manufacturer's quality inspection department inspection before leaving the factory, and should be accompanied by product quality qualification documents or marks.
7.1.2: Skid steer loader factory inspection items can be in accordance with the provisions of Table 1.
7.1.3 The factory inspection programme shall be determined by the manufacturer or by mutual agreement between supply and demand.
8 Marking. Packaging, transport and storage
Appendix A (informative) List of main parameters of the skid steer loader
Referred in GB/T 25694-2021:
GB/T 3766-2015 Hydraulic fluid power-General rules and safety requirements for systems and their components *
GB/T 7935-2005 Hydraulic fluid power - General requirements for hydraulic components *
GB/T 8419-2007 Earth-moving machinery—Laboratory evaluation of operator seat vibration padding: 6px;
color: rgb(153, 153, 153);
background-color: rgb(248, 248, 248);
border-bottom: 1px solid rgb(153, 153, 153);
GB/T 25694-2021 Earth-moving machinery—Skid-steer loaders (English) Standard No.
Translation Price(USD) 165.0 Implemented on 2022-7-1 Delivery
via email in 1~3 business day
Add GB/T 25694-2021 to Cart
Detail of GB/T 25694-2021 Standard No.
Earth-moving machinery—Skid-steer loaders Chinese Name 土方机械 滑移转向装载机
Chinese Classification P97
Professional Classification GB ICS Classification Issued by SAMR; SAC Issued on 2021-12-31 Implemented on 2022-7-1 Status valid Superseded by Superseded on Abolished on Superseding
GB/T 25694-2010 Earth-moving machinery—Skid-steer loaders Language English File Format PDF Word Count 5500 words
Translation Price(USD) 165.0 Keywords
8 Marking. Packaging, transport and storage
8.1 Marking
8.1.1 The product label shall be firmly fixed in a conspicuous position on the body of the skid steer loader.
8.1 Marking
8.1.1 The product label shall be firmly fixed in a conspicuous position on the body of the skid steer loader.
8.2 Packaging
The packaging of the skid steer loader and its accessories, spare parts and random tools shall conform to the provisions of JB/T5947 and ensure that they are not damaged under normal transport and storage conditions.
8.2 Packaging
The packaging of the skid steer loader and its accessories, spare parts and random tools shall conform to the provisions of JB/T5947 and ensure that they are not damaged under normal transport and storage conditions.
8.3 Random documents
When the skid steer loader leaves the factory, the following documents shall be provided to the user:
b) Product certificate of conformity c) Driver's manual
d) A catalogue of random tools and spare parts and accessories.
8.3 Random documents
When the skid steer loader leaves the factory, the following documents shall be provided to the user:
b) Product certificate of conformity c) Driver's manual
d) A catalogue of random tools and spare parts and accessories.
8.4 Transport
8.4.1 The transport of the skid steer loader shall be in accordance with the relevant regulations of the transport department.
8.4.2 No part of the skid steer loader shall be disassembled during transport without the consent of the manufacturer. 8.4.3 Before shipment, the manufacturer shall disconnect the battery from the body circuit.
8.4 Transport
8.4.1 The transport of the skid steer loader shall be in accordance with the relevant regulations of the transport department.
8.4.2 No part of the skid steer loader shall be disassembled during transport without the consent of the manufacturer. 8.4.3 Before shipment, the manufacturer shall disconnect the battery from the body circuit.
8.5 Storage
The protection and storage of the skid steer loader shall comply with the provisions of GB/T 22358.
Appendix A (informative) List of main parameters of the skid steer loader
8.5 Storage
The protection and storage of the skid steer loader shall comply with the provisions of GB/T 22358.
Appendix A (informative) List of main parameters of the skid steer loader
Contents of GB/T 25694-2021
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 17 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 3766Hydraulic fluid power -- General rules and safety requirements for systems and their components
- GB/T 7935Hydraulic fluid power - General requirements for hydraulic components
- GB/T 8419Earth-moving machinery - Laboratory evaluation of operator seat vibration
- GB/T 8498Earth-moving machinery - Basic types - Identification and vocabulary
- GB/T 8595Earth-moving machinery - Operator's controls
- GB/T 10175Earth moving machinery -- Loaders and backhoe loaders -- Part 1: Calculation of rated operating capacity and test method for verifying calculated tipping load
Similar standards
Editions of GB/T 25694
| Edition | Title | Revision | Status |
|---|---|---|---|
| GB/T 25694-2021 | Earth-moving machinery - Skid-steer loaders | current edition | Current |
| GB/T 25694-2010 | Earth-moving machinery-Skid-steer loaders | previous edition | Superseded |
This page sells the current edition, GB/T 25694-2021. Earlier editions are listed for reference only.
How to Download GB/T 25694-2021
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 16710-2010 — Earth-moving machinery - Noise limits
GB 16710-2025 — Earth-moving machinery - Noise limits
GB 20891-2014 — [Including 2020XG1] Limits and measurement methods for exhaust pollutants from diesel engines of non-road mobile machinery (CHINA III, IV)
Secure payment via Stripe
Payments accepted
GB/T 25694-2021
$150.00