GB/T 21334-2017Classification and planning fundamental requirements of logistics park (English PDF)

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009.

This standard replaces GB/T 21334-2008 "Logistics Park Classification and Basic Requirements." This standard compared with GB/T 21334-2008, in addition to editorial changes outside the main technical changes are as follows.

--- Modify the standard name;

--- Modify the scope of the standard (see Chapter 1);

--- Modify the normative references (see Chapter 2);

--- Modify the definition of some key terms, such as "Logistics Park" (see 3.1); increased "International Logistics" "logistics operation area" set Meaning (see 3.7, 3.8);

--- Modify the classification principle (see 4.1);

--- Modify the classification of the logistics park, an increase of "port service-oriented" logistics park, the freight service, production and service type, business services Type and Integrated Services Logistics Park category description has been adjusted (see 4.2);

--- Modify logistics planning requirements chapter, adjusted the order of the article, and made some adjustments to the description (see Chapter 5);

--- Modify a single logistics park area requirements, an increase of logistics operation area ratio (see 5.1.3);

--- Removed Appendix A, the relevant content into the standard terms.

1 Scope

This standard specifies the logistics park classification and planning requirements.

This standard applies to the definition of logistics parks and logistics park planning and construction.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version applies to this document. For undated references, the latest edition (including all amendments) applies to this document.

GB/T 18354 Logistics terms

Logistics Park Service Specification and Evaluation Index

GB 50016 architectural design code for fire protection

GB 50028 urban gas design specifications

GB 50052 for power distribution system design specifications

Urban water supply project planning specification

GB 50289 urban engineering pipeline integrated planning specification

GB/T 50293 urban power planning specification

GB 50318 urban drainage project planning norms

3 Terms and definitions

GB/T 18354 and GB/T 30334-2013 defined terms and definitions apply to this document. For ease of use, repeat the column below GB/T 18354 and GB/T 30334-2013 some of the terms and definitions.