GB/T 24358-2019Classification and planning fundamental requirements of logistics center (English PDF)

1 Scope

This Standard specifies the classification and general planning requirements of logistics center, as well as the planning requirements of warehouse, road, yard, parking lot, railway line, dedicated wharf, information platform and the like facilities.

This Standard is applicable to the definition of logistics centre and the planning design of the logistics center.

2 Normative References

The following documents are essential to the application of this document. For the dated documents, only the versions with the dates indicated are applicable to this document; for the undated documents, only the latest version (including all the amendments) are applicable to this document.

GB/T 18354-2006 Logistics Terms

GB/T 28581 General Warehouse and Warehouse Area Design Parameter

GB 50009 Load Code for the Design of Building Structures

GB 50016 Code of Design on Building Fire Protection and Prevention

GB 50072 Code for Design of Cold Store

3 Terms and Definitions

For the purpose of this document, the terms and definitions given in GB/T 18354-2006 apply. For the benefit of use, some terms and definitions given in GB/T 18354-2006 are listed as follows: […]

5 General Requirements

5.5 The functional area of logistics center generally includes the operation area, administrative office, and living service area; the operation area shall be set separately from the administrative office and the living service area. The different types of logistic centers can build corresponding functional areas according to the type and flow frequency of the incoming and outgoing goods; rationally set the layout of the functional area, ensuring the smooth realization of their main functions and achieving orderly flow of goods and optimal allocation of resources. However, the total land area of the supporting administrative office and the living service facilities shall not exceed 10% total floor area of the logistics center.

5.6 Calculate the proportion of floor areas of administrative office and living service facilities as per the Formula (1):

Where: R - the proportion of the floor areas of the administrative office and the living service facilities; Ax - the floor areas of the administrative office and living service facilities, in m2; At - the total area of the center, in m2.

5.7 When it is impossible to calculate the floor areas of administrative office and living service facilities, respectively; it can be replaced by the allocated land area obtained through calculating the building areas of administrative office and living service facilities accounting for the total building area.

5.8 The plot ratio of the logistics center shall be no less than 0.6; the plot ratio shall be calculated as per the Formula (2). For the building with height more than 8m, when calculating the plot ratio, the building area shall be doubled:

Where: PR - the plot ratio of the logistics center; Ac - the total building area within the range of the project land, in m2; At - the total land area of the project, in m2.

6 Facility Requirements