GB/T 19866-2005Specification and qualification of welding procedures for metallic materials -- General rules (English PDF)
焊接工艺规程及评定的一般原则
This is a limited preview
Buy now to download the full PDF (9 pages)
Need quotation for your management?
Get a formal quotation for GB/T 19866-2005 in 30 minutes.
Issued by
General Administration of Quality Supervision, Inspection and Quarantine
Level / Type
National · Recommended
Issue date
August 10, 2005
Implementation date
April 1, 2006
Scope
GB/T 19866-2005 is the English-translated version of 焊接工艺规程及评定的一般原则.
GB/T 19866-2005 — This Standard defines general rules for the specification and qualification of welding procedures. This Standard is applicable to manual, mechanized and automatic welding.
Found what you need?
Document preview — GB/T 19866-2005
National Standard of the People's Republic of China
- ICS
- 25.160.10
- Classification
- J 33
Issued by: General Administration of Quality Supervision, Inspection and Quarantine
Contents
- Foreword...3
- 1 Scope...4
- 2 Normative references...4
- 3 Terms and definitions...5
- 4 Welding procedure...7
- 5 Development and qualification of welding procedures...7
- 6 Validity...9
Foreword
This Standard identically adopts ISO 15607.2003 "Specification and
qualification of welding procedures for metallic materials - General rules"
(English version).
In order to ensure the standard coordination and operability, this Standard
makes the necessary editorial changes in the equivalent of the translation of
the international standard.
Compared with ISO 15607, this Standard made the following changes in the
content.
- directly used the definitions of GB/T 3375;
- deleted the clause of "Abbreviations" in ISO 15607, added the
abbreviations in relevant terms;
- the process specifications for different welding methods shall be specified
by the ISO 15609 series of standards; this series of standards is being
drafted. In order to ensure the operability of the standard, this Standard
does not specify the format requirements for the welding procedure.
This Standard shall be issued for the first time.
Annex A, Annex B, Annex C of this Standard are informative.
This Standard was proposed by China Machinery Industry Federation.
This Standard shall be under the jurisdiction of National Technical Committee
on Welding of Standardization Administration of China.
Main drafting organizations of this Standard. Harbin Welding Research Institute,
Harbin Welding Technology Training Center.
Main drafters of this Standard. Piao Dongguang, Wang Lin, Qian Qiang.
Specification and qualification of welding
procedures for metallic materials - General rules
1 Scope
This Standard defines general rules for the specification and qualification of
welding procedures.
This Standard is applicable to manual, mechanized and automatic welding.
2 Normative references
The following standards contain the provisions which, through reference in this
Standard, constitute the provisions of this Standard. For dated references,
subsequent amendments (excluding corrections) or revisions do not apply to
this Standard. However, the parties who enter into agreement based on this
Standard are encouraged to investigate whether the latest versions of these
documents are applicable. For undated reference documents, the latest
versions apply to this Standard.
GB/T 3375, Welding terminology
GB/T 5185, Welding and allied processes - Nomenclature of processes and
reference numbers
GB/T 19867.1, Welding procedure specification for arc welding
GB/T 19868.1, Welding procedure qualification based on tested welding
consumables
GB/T 19868.2, Welding procedure qualification based on previous welding
experience
GB/T 19868.3, Welding procedure qualification by adoption of a standard
welding procedure
GB/T 19868.4, Welding procedure qualification based on pre-production
welding test
GB/T 19869.1, Welding Procedure Qualification Test for Steels, Nickel and
Nickel Alloys
......
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 9 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 3375Welding terminology
- GB/T 5185Welding,brazing,soldering and cutting-Nomenclature of processes and reference numbers
- GB/T 19867.1Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 1: Arc welding
- GB/T 19868.1Welding procedure qualification based on tested welding consumables
- GB/T 19868.2Welding procedure qualification based on previous welding experience
- GB/T 19868.3Welding procedure qualification by adoption of standard welding procedure
Cited by
- GB/T 19867.2-2026Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 2: Gas welding
- GB/T 14977-2025General requirement for surface condition of hot-rolled steel sheet and plate
- GB/T 20173-2025Valves for petroleum and natural gas industries
- GB/T 45982.1-2025Micro joining of 2nd generation high temperature superconductors - Part 1: General requirements for the procedure
- GB/T 45982.2-2025Micro joining of 2nd generation high temperature superconductors - Part 2: Qualification for welding and testing personnel
- GB/T 45982.3-2025Micro joining of 2nd generation high temperature superconductors - Part 3: Test methods for joints
How to Download GB/T 19866-2005
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 19867.1-2005 — Welding procedure specification for arc welding
GB/T 19867.1-2026 — Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 1: Arc welding
GB/T 19868.1-2005 — Welding procedure qualification based on tested welding consumables
GB/T 19866-2005
$85.00