GB/T 19867.1-2026Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 1: Arc welding (English PDF)
金属材料焊接工艺规程及评定 焊接工艺规程 第1部分：电弧焊
Also coversGB/T19867.1-2026 + GBT19867.1-2026
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 19867.1-2026 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
September 28, 2026
Implementation date
April 1, 2027
Scope
GB/T 19867.1-2026 is the English-translated version of 金属材料焊接工艺规程及评定 焊接工艺规程 第1部分：电弧焊.
A welding procedure specification is the written instruction that tells welders how a joint is to be made, and this standard covers that specification for arc welding. It is Part 1 of the series on the specification and qualification of welding procedures for metallic materials. Welding engineers, procedure writers, quality and inspection staff, fabricators and certification bodies will use it to prepare consistent, reviewable procedure documents.
Its focus is on the specification itself, so it works alongside the general rules and the qualification documents that prove that a procedure delivers sound welds. It adopts an international standard and replaces GB/T 19867.1-2005. The edition was issued on 28 September 2026 and takes effect on 1 April 2027. Because arc welding is the most widespread family of joining processes in fabrication, shipbuilding and construction, a clear specification format helps contractors and customers agree on what is being approved. Its application is recommended, not compulsory, unless a contract cites it.
Found what you need?
Document preview — GB/T 19867.1-2026
National Standard of the People's Republic of China
- ICS
- 25.160.10
- Classification
- J 33
- Replacing
- GB/T 19867.1-2005
Issued by: State Administration for Market Regulation; Standardization Administration of China
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
Foreword
GB/T 19867.1-2026 is a recommended national standard (GB/T) of the People's Republic of China, issued on 28 September 2026 by the State Administration for Market Regulation and the Standardization Administration of China, with effect from 1 April 2027.
This edition replaces GB/T 19867.1-2005.
The document adopts an international standard (ISO or IEC).
It is under the responsibility of the Standardization Administration of China.
Classification: ICS 25.160.10; CCS J 33.
1 Scope
A welding procedure specification is the written instruction that tells welders how a joint is to be made, and this standard covers that specification for arc welding. It is Part 1 of the series on the specification and qualification of welding procedures for metallic materials. Welding engineers, procedure writers, quality and inspection staff, fabricators and certification bodies will use it to prepare consistent, reviewable procedure documents.
Its focus is on the specification itself, so it works alongside the general rules and the qualification documents that prove that a procedure delivers sound welds. It adopts an international standard and replaces GB/T 19867.1-2005. The edition was issued on 28 September 2026 and takes effect on 1 April 2027. Because arc welding is the most widespread family of joining processes in fabrication, shipbuilding and construction, a clear specification format helps contractors and customers agree on what is being approved. Its application is recommended, not compulsory, unless a contract cites it.
Remaining clauses in the full document
- 2 Normative references
- 3 Terms and definitions
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Cited by
- GB/T 46087.2-2025Test for shop primers in relation to welding and allied processes - Part 2: Welding properties of shop primers
- GB/T 44518-2024Welding procedure qualification test for underwater hyperbaric dry welding
- GB/T 44527-2024Qualification testing of diver-welders and welding operators for underwater hyperbaric dry welding
- GB/T 44841-2024Welding procedure qualification test for non-alloyed and low-alloyed cast irons
- GB/T 40424-2021Welding procedure qualification test for tubes to tube-plate joints
- GB/T 40740-2021Welding procedures qualification for overlay welding
Similar standards
Editions of GB/T 19867.1
| Edition | Title | Revision | Status |
|---|---|---|---|
| GB/T 19867.1-2026 | Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 1: Arc welding | current edition | Current |
| GB/T 19867.1-2005 | Welding procedure specification for arc welding | previous edition | In force until 1 April 2027 |
This page sells the current edition, GB/T 19867.1-2026. Earlier editions are listed for reference only.
How to Download GB/T 19867.1-2026
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 19867.1-2005 — Welding procedure specification for arc welding
GB/T 19867.2-2026 — Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 2: Gas welding
GB/T 19867.3-2008 — Welding procedure specification for electron beam welding
Secure payment via Stripe
Payments accepted
GB/T 19867.1-2026
$255.00