JB/T 6996-2007General technical requirements for hydraulic systems of heavy machinery (English PDF)
重型机械液压系统 通用技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 6996-2007 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
March 6, 2007
Implementation date
September 1, 2007
Scope
JB/T 6996-2007 is the English-translated version of 重型机械液压系统 通用技术条件.
JB/T 6996-2007 is the Chinese standard "General technical requirements for hydraulic systems of heavy machinery". Its scope clause reads: This standard specifies common technical conditions of hydraulic system for mechanical equipments used in aspects of metallurgy, rolling, heavy forging and so on (hereinafter referred to as mechanical equipments).
As for hydraulic systems (hereinafter referred to as system) for mechanical equipments above, corresponding technical requirements in design, fabrication and acceptance may be materialized and supplemented according to the principles of this standard in combination of the relevant standards.
This standard is applicable to mechanical equipments hydraulic system whose nominal pressure is not larger than 31.5 MPa.
Found what you need?
Document preview — JB/T 6996-2007
National Standard of the People's Republic of China
- Replacing
- JB/T 6996-1993
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- 1 Scope
- 2 Normative References
- 3 General Requirements
- 3.1 Basic Requirements
- 3.2 Design conditions
- 3.3 Safety Requirements
- 3.4 Energy conservation requirements
- 3.5 Working temperature
- 3.6 Pipeline flow rate
- 3.7 Noise
- 3.8 Selection basis
- 3.9 Cleanness control
- 3.10 Manufacture reference
- 3.11 Basic requirements for maintenance
- 3.12 Hoisting measure
- 3.13 Data for Installation, operation and maintenance
- 3.14 Acceptance data
- 3.15 Marking
- 3.16 Operating force
- 3.17 Tightening torque
- 4 Hydraulic oil (liquid)
- 5 Quality of casting, forging, welding and pipe fittings
- 6 Welding requirements
- 6.1 Basic requirements
- 6.2 Oil tank welding
- 6.3 Pipeline welding
- 7 Processing quality
- 8 External Leakage
- 9 Hydraulic action element
- 9.1 Hydraulic cylinder
- 9.2 Hydraulic motor
- 9.3 Installing base
- 10 System Equipment Assembly
- 10.1 Hydraulic pumping unit
- 10.2 Oil tank apparatus
- 10.3 Other Auxiliaries and Requirement
- 10.3.1 Heat Exchanger
- 10.3.2 Filter
- 10.3.3 Accumulators
- 10.3.4 Pressure Gauge
- 10.3.5 Sealing Member
- 10.4 Installation of Hydraulic Valve
- 10.5 Manifold Block
- 11 Pipeline
- 11.1 Fittings Material
- 11.2 Requirements for Fittings Tolerance
- 11.3 Pipeline installation shall conform to the following requirements
- 11.4 Laying in Ditch
- 11.5 Tube Bending
- 11.6 Hose
- 11.7 Fixings of Pipeline
- 11.8 Sampling Point of Pipeline
- 12 Wiring of Electrical Appliance
- 13 Controlling
- 13.1 Protective device of Circuit
- 13.2 Manual Overvide
- 13.3 Controlling on Valve
- 13.4 Installation Requirement of Control Device
- 13.5 Interrelationship of Circuit
- 13.6 Serve Control Circuit
- 13.7 Controlling Requirements on Hydraulic Pump Station
- 14 Flushing
- 15 Test
- 16 Coating
- 16.1 Basic Requirements
- 16.2 Tinting Requirement
- 17 Package, Transportation and Storage
- Annex A (Informative) Flushing Cleanliness Level Standard of Hydraulic Systems Assembly
1 Scope
This standard specifies common technical conditions of hydraulic system for mechanical equipments used in aspects of metallurgy, rolling, heavy forging and so on (hereinafter referred to as mechanical equipments). As for hydraulic systems (hereinafter referred to as system) for mechanical equipments above, corresponding technical requirements in design, fabrication and acceptance may be materialized and supplemented according to the principles of this standard in combination of the relevant standards.
This standard is applicable to mechanical equipments hydraulic system whose nominal pressure is not larger than 31.5 MPa.
2 Normative References
The following documents contain provisions which, through reference in this text, constitute provisions of this standard. For the dated references, the subsequent amendments to (excluding amending error in the text), or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this standard are encouraged to study whether the latest edition of these documents is applicable. For the undated references, the latest edition of the normative document is applicable to this standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Cited by
- GB/T 37400.10-2019Heavy machinery general technical specification - Part 10: Assembling
- QC/T 699-2019Tail lifts for vehicles
- JB/T 12807-2016Main bearing lubrication systems for tube mills in mining
- JB/T 12940-2016Continuous colour coating lines for steel strip - Acceptance specification
- JB/T 6995-2016Cold rolled strip finishing and processing lines - Uncoilers and coilers
- GB/T 10605-2015Center driving rotary-rake thickener
Similar standards
Editions of JB/T 6996
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 6996-2007 | General technical requirements for hydraulic systems of heavy machinery | current edition | Current |
| JB/T 6996-1993 | General technical requirements for hydraulic systems of heavy machinery | previous edition | Superseded |
This page sells the current edition, JB/T 6996-2007. Earlier editions are listed for reference only.
How to Download JB/T 6996-2007
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 10062-2026 — Probes used in ultrasonic flaw detection - Testing methods for performance
JB/T 10096-2026 — Cases for power semiconductor devices - Selection guidance
JB/T 10097-2026 — Case for power semiconductor device
JB/T 6996-2007
$205.00