JB/T 7343-2010Single and double action sheet metal drawing hydraulic presses (English PDF)
单双动薄板冲压液压机
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 7343-2010 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
May 14, 2010
Implementation date
October 1, 2010
Scope
JB/T 7343-2010 is the English-translated version of 单双动薄板冲压液压机.
JB/T 7343-2010, a recommended machinery industry standard, deals with single and double action sheet metal drawing hydraulic presses of the frame and high-column constructions.
It sets out the product types, the basic parameters and the technical conditions for these machines, and its scope covers single and double action hydraulic sheet metal presses.
The Ministry of Industry and Information Technology issued the document, which falls under Chinese classification J62 and international classification 25.120.10, and it takes the place of the earlier edition JB/T 7343-1994.
Its quoted standards include GB/T 1219-2008, GB 5226.1, GB/T 11352-2009, GB 23281, several parts of JB/T 5000 and JB/T 7978-1999.
Found what you need?
Document preview — JB/T 7343-2010
National Standard of the People's Republic of China
- ICS
- 25.120.10
- Replacing
- JB/T 7343-1994
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- Foreword
- Scope
- Normative references
- About this standard
- Related standards
- Classification and status
1 Foreword
JB/T 7343-2010 was issued by MIIT on 14 May 2010 and has been in force since 1 October 2010.
It replaces the earlier edition JB/T 7343-1994.
2 Scope
JB/T 7343-2010, a recommended machinery industry standard, deals with single and double action sheet metal drawing hydraulic presses of the frame and high-column constructions. It sets out the product types, the basic parameters and the technical conditions for these machines, and its scope covers single and double action hydraulic sheet metal presses. The Ministry of Industry and Information Technology issued the document, which falls under Chinese classification J62 and international classification 25.120.10, and it takes the place of the earlier edition JB/T 7343-1994. Its quoted standards include GB/T 1219-2008, GB 5226.1, GB/T 11352-2009, GB 23281, several parts of JB/T 5000 and JB/T 7978-1999.
3 Normative references
JB/T 7343-2010 cites a number of standards, which apply in full or in part through the references made to them in its clauses. Those listed below are the ones the catalogue record shows; the record cuts the list short, so it may not be complete.
GB/T 700
GB/T 1219-2008 — Dial gauges
GB/T 1591
GB 5226.1
GB/T 6092-2004
GB/T 7935
GB/T 8163
GB/T 11352-2009 — Carbon Steel Castings for General Engineering Purpose
GB 23281
JB/T 5000.3
JB/T 5000.6
JB/T 5000.7
JB/T 5000.8-2007 — General technical requirements for heavy machinery - Part 8: Forgings
JB/T 5000.9
JB/T 5000.10
JB/T 5000.11
JB/T 5000.12
JB/T 5000.13
JB/T 6397-2006 — Large carbon structural steel forgings - Technical requirements
JB/T 6996
JB/T 7978-1999 — Steel and granite straightedges
4 About this standard
Issued by: MIIT
English translation: about 15 pages
5 Related standards
Other editions:
JB/T 7343-1994 (earlier edition)
6 Classification and status
International classification (ICS): 25.120.10
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
Editions of JB/T 7343
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 7343-2010 | Single and double action sheet metal drawing hydraulic presses | current edition | Current |
| JB/T 7343-1994 | Single and double action sheet metal drawing hydraulic presses | previous edition | Superseded |
This page sells the current edition, JB/T 7343-2010. Earlier editions are listed for reference only.
How to Download JB/T 7343-2010
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 11352-2009 — Carbon Steel Castings for General Engineering Purpose
GB/T 1219-2008 — Dial gauges
GB/T 1591-2018 — High strength low alloy structural steels
Secure payment via Stripe
Payments accepted
JB/T 7343-2010
$235.00