Valid

JB/T 12510-2015Pressure leveling hydraulic press for medium and heavy steel plate (English PDF)

中厚钢板压力校平液压机

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 12510-2015 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

July 14, 2015

Implementation date

January 1, 2016

Scope

JB/T 12510-2015 is the English-translated version of 中厚钢板压力校平液压机.

JB/T 12510-2015 is the Chinese machinery industry standard covering pressure leveling hydraulic press for medium and heavy steel plate. It was issued on 14 July 2015 and has been in force since 1 January 2016, as a first edition.

The document is under the responsibility of the Ministry of Industry and Information Technology. This page is published from the official record of the 2015 edition.

The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.

Found what you need?

Document preview — JB/T 12510-2015

National Standard of the People's Republic of China

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

1 Scope
2 Normative references
3 Terms and definitions
4 Type and basic parameters
4.1 Type
4.2 Basic parameters
4.3 Explanation of the model of the flattening machine
5 Technical requirements
5.1 General technical requirements
5.2 Safety and environmental protection
5.3 Strength and stiffness conditions of the frame
5.4 Technical requirements on the main parts and components
5.5 Forgings, castings and welded parts
5.6 Machined parts
5.7 Assembly
5.8 Painting
5.9 Hydraulic, lubrication and pneumatic systems
5.10 Piping
5.11 Electrical system
5.12 Appearance
5.13 Installation works and acceptance
6 Test methods, inspection and acceptance rules
6.1 General
6.2 Inspection of the appearance
6.3 Inspection of the type and of the basic parameters
6.4 Performance inspection
6.5 No-load running inspection
6.6 Load running (non-process) inspection
6.7 Accuracy inspection
6.8 Product acceptance
7 Marking, packaging, transport and storage
Bibliography
Figure 1 Basic structural type of the body of the flattening machine
Figure 2 Diagram of the inspection method of the levelness and flatness of the work table and of the press head
Figure 3 Diagram of the inspection method of the levelness of the trolley guide plate, of the support plate under the upper crossbeam and of the side guide plate

3 Terms and definitions

4 Type and basic parameters

5 Technical requirements

6 Test methods, inspection and acceptance rules

7 Marking, packaging, transport and storage

Foreword

This document was issued on 14 July 2015 by the Ministry of Industry and Information Technology of the People's Republic of China, and has been in force since 1 January 2016.

It is the first edition of this standard.

The document is under the responsibility of the Ministry of Industry and Information Technology.

About this edition

JB/T 12510-2015 is the first edition of this standard. It was issued on 14 July 2015 and has been in force since 1 January 2016.

There is no earlier edition to compare it with, so a specification that has to refer to this subject can only cite JB/T 12510-2015 itself.

The interval between issue and effect is the transition period. It exists so that producers, laboratories and buyers can requalify products, revise procedures and use up documentation before the new text becomes the one that applies. The date on this page is the official one announced by the Ministry of Industry and Information Technology of the People's Republic of China.

Edition history and citation

JB/T 12510-2015 is a first edition: there is no earlier version of this standard, so a document that needs to refer to this subject can only cite JB/T 12510-2015 itself.

Where an edition is replaced, the Chinese standardization system keeps the number and changes the year: the number identifies the subject, the year identifies the text. That is why a citation without a year is ambiguous and a citation with one is not.

Classification and status

JB/T 12510-2015 carries no ICS number in the official record.

The JB/T prefix marks a recommended standard of China's machinery industry, issued by the Ministry of Industry and Information Technology. It is not, in itself, law: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

The document is under the responsibility of the Ministry of Industry and Information Technology, which is the body that maintains it and that will answer a formal question about its interpretation.

How this standard is designated

The full designation is JB/T 12510-2015. A citation should carry the number with its year, because the year identifies the text that applies.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

JB/T 12381.1-2015|JB/T 12381.2-2015|JB/T 12381.3-2015|NB/SH/T 6087-2024|JB/T 9179.1-2013|GB/T 38713-2020

How to Download JB/T 12510-2015

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.