JB/T 6391.1-2010Conductor systems - Part 1: Insulated protective conductor systems (English PDF)
滑接输电装置 第1部分：绝缘防护型滑接输电装置
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 6391.1-2010 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
February 11, 2010
Implementation date
July 1, 2010
Scope
JB/T 6391.1-2010 is the English-translated version of 滑接输电装置 第1部分：绝缘防护型滑接输电装置.
JB/T 6391.1-2010 is a recommended Chinese machinery industry standard on the insulated protective type of sliding-contact conductor system. For such devices it fixes the terminology and definitions, the types and basic parameters, the requirements, test methods, inspection rules, marking, packaging, storage and installation.
They supply electrical energy to lifting machinery, conveying machinery, automatic production lines and other moving electrical equipment, at a rated operating frequency of 50 Hz or 60 Hz and at rated voltages of 1000 V and 1500 V and below, alternating or direct current.
Units fed by electromagnetic induction or other non-sliding means fall outside it. It replaces JB/T 6391.1-1992; its classifications are K30 and 29.120.01.
Found what you need?
Document preview — JB/T 6391.1-2010
National Standard of the People's Republic of China
- ICS
- 29.120.01
- Replacing
- JB/T 6391.1-1992
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- 1 Scope
- 2 Normative references
1 Foreword
JB/T 6391.1-2010 was issued by MIIT on 11 February 2010 and has been in force since 1 July 2010.
It replaces the earlier edition JB/T 6391.1-1992.
It is one of 2 parts of the JB/T 6391 series.
2 Scope
This standard is a recommended Chinese machinery industry standard on the insulated protective type of sliding-contact conductor system. For such devices it fixes the terminology and definitions, the types and basic parameters, the requirements, test methods, inspection rules, marking, packaging, storage and installation. They supply electrical energy to lifting machinery, conveying machinery, automatic production lines and other moving electrical equipment, at a rated operating frequency of 50 Hz or 60 Hz and at rated voltages of 1000 V and 1500 V and below, alternating or direct current. Units fed by electromagnetic induction or other non-sliding means fall outside it. It replaces JB/T 6391.1-1992; its classifications are K30 and 29.120.01.
3 Normative references
JB/T 6391.1-2010 cites a number of standards, which apply in full or in part through the references made to them in its clauses. Those listed below are the ones the catalogue record shows; the record cuts the list short, so it may not be complete.
GB/T 156
GB/T 1408.1
GB 2893
GB/T 2900.1
GB/T 2900.18
GB/T 4207
GB 4208
GB/T 5169.11
GB/T 5585.1-2005
GB/T 5585.2-2005
GB 7251.1-2005
GB 7251.2-2006
GB/T 8923
GB/T 13306
GB/T 13384
GB 14048.1-2006
GB/T 16935.1-2008
GB 19517-2009
JB/T 4003
4 About this standard
Issued by: MIIT
English translation: about 15 pages
5 Related standards
Other parts of this standard:
JB/T 6391.2-2010 — Conductor systems - Part 2: Rigid conductor rail systems
Other editions:
JB/T 6391.1-1992 (earlier edition)
6 Classification and status
International classification (ICS): 29.120.01
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 156Standard voltages
- GB/T 1408.1Insulating materials -- Test methods for electric strength -- Part 1: Test at power frequencies
- GB/T 2900.1Electrotechnical terminology - Fundamental terms
- GB/T 2900.18Electrotechnical terminology - Low voltage apparatus
- GB/T 4207Method for the determination of the proof and the comparative tracking indices of solid insulating materials
- GB/T 5169.11Fire hazard testing for electric and electronic products -- Part 11: Glowing/hot-wire based test methods -- Glow-wire flammability test method for end-products (GWEPT)
GB 2893 · GB 4208 · GB 7251.1-2005 · GB 7251.2-2006 · GB 14048.1-2006
Similar standards
Editions of JB/T 6391.1
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 6391.1-2010 | Conductor systems - Part 1: Insulated protective conductor systems | current edition | Current |
| JB/T 6391.1-1992 | Conductor systems - Part 1: Insulated protective conductor systems | previous edition | Superseded |
This page sells the current edition, JB/T 6391.1-2010. Earlier editions are listed for reference only.
How to Download JB/T 6391.1-2010
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 13306-2011 — Plates
GB/T 13384-2008 — General specifications for packing of mechanical and electrical product
GB/T 1408.1-2016 — Insulating materials -- Test methods for electric strength -- Part 1: Test at power frequencies
Secure payment via Stripe
Payments accepted
JB/T 6391.1-2010
$195.00