JB/T 6391.2-2010Conductor systems - Part 2: Rigid conductor rail systems (English PDF)
滑接输电装置 第2部分：刚体滑接输电导轨装置
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 6391.2-2010 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
February 11, 2010
Implementation date
July 1, 2010
Scope
JB/T 6391.2-2010 is the English-translated version of 滑接输电装置 第2部分：刚体滑接输电导轨装置.
JB/T 6391.2-2010 is the recommended Chinese machinery industry standard for the rigid rail sliding-contact power transmission unit. It covers terms and definitions, types and basic parameters, requirements, test methods, inspection rules, marking, packaging, storage and installation.
Such units supply electrical energy to lifting machinery, conveying machinery, urban rail transit and other moving equipment, at a rated operating frequency of 50 Hz or 60 Hz and at rated voltages of 3.0 kV and 10 kV and below, alternating or direct current.
Transmission systems built from a contact line erected under tension lie outside it. It carries the classifications K30 and 29.120.01, and among the standards it quotes are GB 311.1-1997, GB/T 11022-1999 and JB/T 6391.1-2010.
Found what you need?
Document preview — JB/T 6391.2-2010
National Standard of the People's Republic of China
- ICS
- 29.120.01
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- 1 Scope
- 2 Normative references
1 Foreword
JB/T 6391.2-2010 was issued by MIIT on 11 February 2010 and has been in force since 1 July 2010.
It is one of 3 parts of the JB/T 6391 series.
2 Scope
This standard is the recommended Chinese machinery industry standard for the rigid rail sliding-contact power transmission unit. It covers terms and definitions, types and basic parameters, requirements, test methods, inspection rules, marking, packaging, storage and installation. Such units supply electrical energy to lifting machinery, conveying machinery, urban rail transit and other moving equipment, at a rated operating frequency of 50 Hz or 60 Hz and at rated voltages of 3.0 kV and 10 kV and below, alternating or direct current. Transmission systems built from a contact line erected under tension lie outside it. It carries the classifications K30 and 29.120.01, and among the standards it quotes are GB 311.1-1997, GB/T 11022-1999 and JB/T 6391.1-2010.
3 Normative references
JB/T 6391.2-2010 cites a number of standards, which apply in full or in part through the references made to them in its clauses. Those listed below are the ones the catalogue record shows; the record cuts the list short, so it may not be complete.
GB/T 156
GB 311.1-1997
GB 2893
GB/T 2900.1
GB/T 2900.18
GB/T 2900.19
GB/T 3048.2
GB/T 4585
GB/T 5582
GB/T 5585.1-2005
GB/T 5585.2-2005
GB 7251.1-2005
GB/T 8287.1
GB/T 8923
GB/T 9286-1998
GB/T 11022-1999
GB/T 13306
GB/T 13384
GB 14048.1-2006
GB/T 16927.1-1997
GB 19517-2009
GBJ 149-1990
JB/T 5895
JB/T 4003
JB/T 6391.1-2010 — Conductor systems - Part 1: Insulated protective conductor systems
JB/T 10583
4 About this standard
Issued by: MIIT
English translation: about 15 pages
5 Related standards
Other parts of this standard:
JB/T 6391.1-1992 — Sliding contact power supply systems for cranes - Types and basic parameters
JB/T 6391.1-2010 — Conductor systems - Part 1: Insulated protective conductor systems
6 Classification and status
International classification (ICS): 29.120.01
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 156Standard voltages
- GB 311.1-1997Insulation co-ordination -- Part 1: Definitions, principles and rules
- GB/T 2900.1Electrotechnical terminology - Fundamental terms
- GB/T 2900.18Electrotechnical terminology - Low voltage apparatus
- GB/T 2900.19Electrotechnical terminology - High-voltage test technique and insulation co-ordination
- GB/T 3048.2Test methods for electrical properties of electric cables and wires -- Part 2: Test of electrical resistivity of metallic materials
GB 2893 · GB/T 5582 · GB 7251.1-2005 · GB 14048.1-2006 · GBJ 149-1990
Similar standards
How to Download JB/T 6391.2-2010
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 13306-2011 — Plates
GB/T 13384-2008 — General specifications for packing of mechanical and electrical product
GB/T 156-2017 — Standard voltages
Secure payment via Stripe
Payments accepted
JB/T 6391.2-2010
$165.00