JB/T 4159-1999General technical requirements for electrical products for tropical use (English PDF)
热带电工产品通用技术要求
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 4159-1999 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
August 6, 1999
Implementation date
January 1, 2000
Scope
JB/T 4159-1999 is the English-translated version of 热带电工产品通用技术要求.
JB/T 4159-1999 is the Chinese standard "General technical requirements for electrical products for tropical use". Its scope clause reads: This standard is applicable to the electric products for general use in the tropics (wet tropics, sub-humid tropics, dry tropics).
The technical requirements of various standards for electric products in the tropics shall comply with the requirements of this standard. For those not specified in this standard, various standards for electric products in the tropics shall be applicable. Its clauses include type of climate protection and environmental conditions.
Found what you need?
Document preview — JB/T 4159-1999
National Standard of the People's Republic of China
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- Foreword I
- 1 Scope
- 2 Normative References
- 3 Type of Climate Protection and Environmental Conditions
- 4 Environmental Technical Requirements for Electric Products in the Tropics
- 5 Test and Acceptance Requirements
- 6 Marking and Packaging
1 Scope
This standard is applicable to the electric products for general use in the tropics (wet tropics, sub-humid tropics, dry tropics).
The technical requirements of various standards for electric products in the tropics shall comply with the requirements of this standard. For those not specified in this standard, various standards for electric products in the tropics shall be applicable.
2 Normative References
The following standards contain provisions which, through reference in this text, constitute provisions of this standard. At time of publication, the editions indicated were valid. All standards are subject to revision, and all parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below.
GB/T 1766-1995 Paints and Varnishes — Rating Schemes of Degradation of Coats
GB/T 2423.1-1989 Basic Environmental Testing Procedures for Electric and Electronic Products — Tests A: Cold (eqv IEC 60068-2-1:1990)
GB/T 2423.2-1989 Basic Environmental Testing Procedures for Electric and Electronic Products — Tests B: Dry Heat (eqv IEC 60068-2-2:1974)
GB/T 2423.3-1993 Basic Environmental Testing Procedures for Electric and Electronic Products — Test Ca: Damp Heat, Steady State (eqv IEC 60068-2-3:1985)
GB/T 2423.4-1993 Basic Environmental Testing Procedures for Electric and Electronic Products — Test Db: Damp Heat, Cyclic (eqv IEC 60068-2-30:1985)
GB/T 2423.16-1990 Basic Environmental Testing Procedures for Electric and Electronic Products — Test J: Mould Growth (eqv IEC 60068-2-10:1988)
GB/T 2423.17-1993 Basic Environmental Testing Procedures for Electric and Electronic Products — Test Ka: Salt Mist (eqv IEC 60068-2-11:1981)
GB/T 2423.22-1987 Basic Environmental Testing Procedures for Electric and Electronic Products — Test N: Change of Temperature (eqv IEC 60068-2-14:1984)
GB/T 2423.24-1995 Environmental Testing for Electric and Electronic Products — Part 2: Test Methods — Test Sa: Simulated Solar Radiation at Ground Level (eqv IEC 60068-2-5:1975)
GB/T 4208-1993 Degrees of Protection Provided by Enclosure (IP code)
JB/T 4160-1999 Natural Environmental Conditions Appearing in the Tropics for Electric Products
3 Type of Climate Protection and Environmental Conditions
3.1
The type of climate protection for electric products in the tropics refers to the type of products designed and manufactured with corresponding protective measures for electric products used in tropical climates, and to ensure the reliability of the product used in the typical environment when the electrical product is used in a tropical climate.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Cited by
- GB/T 8446.1-2022Heat sinks for power semiconductor devices—Part 1: Radiators
- GB/T 10067.1-2019Basic specifications for electroheating and electromagnetic processing installations - Part 1: General
- GB/T 11805-2019General specifications for the automatic control components and devices and their systems for hydro-turbine generating sets
- NB/T 10280-2019Warm-damp environmental conditions and technical requirements for power grid state monitoring devices
- QC/T 777-2017Technical specifications for automotive electromagnetic fan clutches
- JB/T 12849-2016Electronic unit pumps for diesel engines - Solenoid actuators
Similar standards
How to Download JB/T 4159-1999
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 10062-2026 — Probes used in ultrasonic flaw detection - Testing methods for performance
JB/T 10096-2026 — Cases for power semiconductor devices - Selection guidance
JB/T 10097-2026 — Case for power semiconductor device
JB/T 4159-1999
$85.00