JB/T 7596-2010Technical requirements for marine charging generator sets (English PDF)
船用充电发电装置 技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 7596-2010 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
February 11, 2010
Implementation date
July 1, 2010
Scope
JB/T 7596-2010 is the English-translated version of 船用充电发电装置 技术条件.
JB/T 7596-2010 is a recommended machinery industry standard setting the technical requirements for marine charging generator sets. It gives the classification of the marine charging power plant, the types and basic parameters, the test methods and inspection rules, and the provisions for marking, packaging, warehousing and transportation.
The standard applies to charging generating devices of rated power from 1.2 kW to 18 kW, driven by a diesel engine and serving the charging of batteries and other marine resistive loads.
The Ministry of Industry and Information Technology issued it under Chinese classification K26 and international classification 29.160, and it replaces JB/T 7596-1994.
Among the standards it quotes are GB 755-2008, GB/T 7060-2008 and JB/T 9617-1999.
Found what you need?
Document preview — JB/T 7596-2010
National Standard of the People's Republic of China
- ICS
- 29.160
- Replacing
- JB/T 7596-1994
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 7596-2010 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 11 February 2010 and has been in force since 1 July 2010.
It replaces the earlier edition JB/T 7596-1994.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This standard is a recommended machinery industry standard setting the technical requirements for marine charging generator sets. It gives the classification of the marine charging power plant, the types and basic parameters, the test methods and inspection rules, and the provisions for marking, packaging, warehousing and transportation. The standard applies to charging generating devices of rated power from 1.2 kW to 18 kW, driven by a diesel engine and serving the charging of batteries and other marine resistive loads. The Ministry of Industry and Information Technology issued it under Chinese classification K26 and international classification 29.160, and it replaces JB/T 7596-1994. Among the standards it quotes are GB 755-2008, GB/T 7060-2008 and JB/T 9617-1999.
JB/T 7596-2010 falls under ICS 29.160, in the field of electrical engineering.
This catalogue holds 619 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 191-2008 — Packaging - Pictorial marking for handling of goods
GB 755-2008 — Rotating Electrical Machines - Rating and Performance
GB/T 997-2008 — Rotating electrical machines - Classification of types of construction, mounting arrangements and terminal box position (IM Code)
GB/T 1029-2005 — Test procedures for three-phase synchronous machines
GB/T 1311-2008 — Test procedure for direct current machines
GB 1971-2006 — Rotating Electrical Machines - Terminal Markings and Direction of Rotation
GB/T 1993-1993 — Cooling methods for rotating electrical machines
GB/T 2423.4-2008 — Environmental testing for electric and electronic products - Part 2: Test method - Test Db: Damp heat, cyclic (12 h + 12 h cycle)
GB/T 2423.16-2008 — Environmental testing - Part 2: Test methods - Test J and guidance: Mold growth
GB/T 2423.17-2008 — Environmental testing for electric and electronic products - Part 2: Test method - Test Ka: Salt mist
GB/T 4772.1-1999 — Dimensions and output series for rotating electrical machines. Part 1: Frame numbers 56 to 400 and flange numbers 55 to 1 080
GB/T 4831-1984 — Specification for model of rotating electrical machines
GB/T 4942.1-2006 — Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification
GB/T 7060-2008 — General specifications for rotary electrical machines in ships
GB/T 7094-2002 — Vibration (sinusoidal) test method for electrical installations in ships
GB 10068-2008
GB/T 10069.1-2006 — Measurement of airborne noise emitted by rotating electrical machines and the noise limits -- Part 1: Method for the measurement of airborne noise emitted by rotating electrical machines
GB 10069.3-2008
GB/T 10250-2007 — Electrical and electronic installations in ships - Electromagnetic compatibility
GB 14048.1-2006 — Low-voltage switchgear and controlgear - Part 1: General rules
GB 14711-2006 — Safety requirements of small and medium size rotating electrical machines
JB/T 4159-1999 — General technical requirements for electrical products for tropical use
JB/T 5810-2007 — Test specifications for interturn insulation of field pole coils and field windings of electrical machines
JB/T 9615.1-2000 — Test methods for interturn insulation of random-wound windings of low-voltage AC machines
JB/T 9615.2-2000 — Test limits for interturn insulation of random-wound windings of low-voltage AC machines
JB/T 9617-1999 — Test specification for interturn insulation of armature windings of DC machines
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Other editions:
JB/T 7596-1994 (earlier edition)
Standards on related subjects:
JB/T 1012-2017 — Specification for YY series capacitor-run induction motors
GB/T 12665-2017 — Requirements of damp-heat testing of electrical machine for service in general environmental condition
JB/T 9542-2015 — General specification for two-value capacitor asynchronous motors
JB/T 7841-2025 — YZZ series three-phase asynchronous motor with electromagnetic brake for elevator - Technical Specifications
JB/T 7564-2025 — YREZ series conical winding rotor brake three-phase asynchronous motor for crane - Technical Specifications
JB/T 7563-2025 — YZE series electromagnetic brake three-phase asynchronous motor for lifting and metallurgy - Technical Specifications
6 Classification and status
International classification (ICS): 29.160
Chinese Standard Classification (CCS): K 26
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191-2008Graphical symbols marking for handling and storage of packages
- GB 755-2008Rotating Electrical Machines - Rating and Performance
- GB/T 997-2008Classification of types of construction, mounting arrangements and terminal box position (IM Code) for rotating electrical machines
- GB/T 1029-2005Test procedures for three-phase synchronous machines
- GB/T 1311-2008Test methods for direct current machines
- GB 1971-2006Rotating Electrical Machines - Terminal Markings and Direction of Rotation
Similar standards
Editions of JB/T 7596
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 7596-2010 | Technical requirements for marine charging generator sets | current edition | Current |
| JB/T 7596-1994 | Technical requirements for marine charging generator sets | previous edition | Superseded |
This page sells the current edition, JB/T 7596-2010. Earlier editions are listed for reference only.
How to Download JB/T 7596-2010
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 14048.1-2006 — Low-voltage switchgear and controlgear - Part 1: General rules
GB 14711-2006 — Safety requirements of small and medium size rotating electrical machines
GB 1971-2006 — Rotating Electrical Machines - Terminal Markings and Direction of Rotation
JB/T 7596-2010
$135.00