Valid

JB/T 4160-2013Natural environmental conditions in the tropics for electric products (English PDF)

电工产品热带自然环境条件

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 4160-2013 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

December 31, 2013

Implementation date

July 1, 2014

Scope

JB/T 4160-2013 is the English-translated version of 电工产品热带自然环境条件.

Natural environmental conditions in the tropics are described by JB/T 4160-2013, a recommended Chinese machinery industry standard written for electrical products.

It sets out the environmental conditions of the tropical zone, which it divides into hot and humid, sub-humid and dry heat areas and identifies in its Figure 1.

Those conditions are meant for general-purpose electrical products used in the tropics as delimited by GB/T 4797.1. The document replaces the earlier edition JB/T 4160-1999 and belongs to class A21 of the Chinese classification and to 19.020 of the international one.

It quotes GB/T 4797.5 and GB/T 4797.6, and it was issued by the Ministry of Industry and Information Technology.

Found what you need?

Document preview — JB/T 4160-2013

National Standard of the People's Republic of China

ICS
19.020
Replacing
JB/T 4160-1999

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Technical requirements
  • 4.1 General requirements
  • 4.2 Model designation
  • 6 Test methods
  • 6.1 Factory inspection
  • 6.2 Type inspection
  • 7 Inspection rules
  • 8 Marking, packaging, transportation and storage
  • 8.1 Marking
  • 8.2 Packaging

1 Foreword

JB/T 4160-2013 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 31 December 2013 and has been in force since 1 July 2014.

It replaces the earlier edition JB/T 4160-1999.

The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

Natural environmental conditions in the tropics are described by JB/T 4160-2013, a recommended Chinese machinery industry standard written for electrical products. It sets out the environmental conditions of the tropical zone, which it divides into hot and humid, sub-humid and dry heat areas and identifies in its Figure 1. Those conditions are meant for general-purpose electrical products used in the tropics as delimited by GB/T 4797.1. The document replaces the earlier edition JB/T 4160-1999 and belongs to class A21 of the Chinese classification and to 19.020 of the international one. It quotes GB/T 4797.5 and GB/T 4797.6, and

JB/T 4160-2013 falls under ICS 19.020, in the field of testing.

This catalogue holds 110 other JB/T standards in that field.

In this catalogue, JB/T standards carry edition years from 1967 to 2026.

3 Normative references

GB/T 4797.5

GB/T 4797.6

4 Where this standard sits

It cites 2 standards, listed in full above.

One other standard in this catalogue cites it: JB/T 4159-2013.

5 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

6 Related standards

Other editions:

JB/T 4160-1999 (earlier edition)

Standards on related subjects:

GB/T 14092.1-2023 — Environmental conditions for machinery products - Part 1: Warm damp

GB/T 4798.2-2021 — Classification of environmental conditions - Classification of groups of environmental parameters and their severities - Part 2: Transportation and handling

GB/T 2421-2020 — Environmental testing - General and guidance

JB/T 8595-2014 — Classification and Gradation for Surface Protection Coating of Machinery Products

JB/T 4375-2013 — Environmental conditions of electric products in indoor and outdoor corrosive location

JB/T 4159-2013 — General technical requirements of electric products for tropical environment

7 Classification and status

International classification (ICS): 19.020

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

Editions of JB/T 4160

EditionTitleRevisionStatus
JB/T 4160-2013Natural environmental conditions in the tropics for electric productscurrent editionCurrent
JB/T 4160-1999Natural environmental conditions in the tropics for electric productsprevious editionSuperseded

This page sells the current edition, JB/T 4160-2013. Earlier editions are listed for reference only.

How to Download JB/T 4160-2013

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 4160-2013

$229.00