JB/T 11468-2013Low-speed vehicles - Wipers (English PDF)
低速汽车 刮水器
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 11468-2013 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
April 25, 2013
Implementation date
September 1, 2013
Scope
JB/T 11468-2013 is the English-translated version of 低速汽车 刮水器.
JB/T 11468-2013 is the Chinese machinery industry standard for wipers on low-speed vehicles. It states the technical requirements for the windscreen wiper, the test methods used on it, the inspection rules and the provisions for marking, packaging, transport and storage.
Its field of application is three-wheeled vehicles and the cabs of low-speed trucks fitted with windscreen wipers. The entry gives Chinese classification T54, international classification 43.080, the sector being the mechanical and machinery industry. Among the standards it quotes are GB/T 10069.1 and JB/T 4159-1999.
Found what you need?
Document preview — JB/T 11468-2013
National Standard of the People's Republic of China
- ICS
- 43.080
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 11468-2013 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 25 April 2013 and has been in force since 1 September 2013.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is the Chinese machinery industry standard for wipers on low-speed vehicles. It states the technical requirements for the windscreen wiper, the test methods used on it, the inspection rules and the provisions for marking, packaging, transport and storage. Its field of application is three-wheeled vehicles and the cabs of low-speed trucks fitted with windscreen wipers. The entry gives Chinese classification T54, international classification 43.080, the sector being the mechanical and machinery industry. Among the standards it quotes are GB/T 10069.1 and JB/T 4159-1999.
JB/T 11468-2013 falls under ICS 43.080, in the field of road vehicle engineering.
This catalogue holds 2 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 10069.1
JB/T 4159-1999 — General technical requirements for electrical products for tropical use
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
GB/T 23920-2022 — Low-speed vehicles—Determination method of maximum speed
GB/T 19120-2015 — Tri-wheel vehicles and low-speed goods vehicles—Braking system—Structure, performance and test methods
GB 16151.5-2008 — Technical requirements for the operating safety of agricultural machinery - Part 5: Trailers
JB/T 11472-2013 — Low-speed vehicles - Electrical equipment - Technical specification
JB/T 11470-2013 — Exhaust silencers for low-speed vehicles - Technical specification
JB/T 11469-2013 — Photometric characteristics of rear registration plate lamps of low-speed vehicles
6 Classification and status
International classification (ICS): 43.080
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
Similar standards
How to Download JB/T 11468-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10069.1-1988 — Measurement of airborne noise emitted by rotating electrical machinery and the noise limits--Engineering method for the measurement of airborne noise
GB/T 10069.1-2006 — Measurement of airborne noise emitted by rotating electrical machines and the noise limits -- Part 1: Method for the measurement of airborne noise emitted by rotating electrical machines
JB/T 4159-1999 — General technical requirements for electrical products for tropical use
JB/T 11468-2013
$105.00