JB/T 4271-2011Specification for three-phase synchronous generator in ships (English PDF)
船用三相同步发电机技术条件
This is a limited preview
Buy now to download the full PDF (16 pages)
Need quotation for your management?
Get a formal quotation for JB/T 4271-2011 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 20, 2011
Implementation date
April 1, 2012
Scope
JB/T 4271-2011 is the English-translated version of 船用三相同步发电机技术条件.
JB/T 4271-2011 is a recommended Chinese machinery industry standard giving the specification for three-phase synchronous generators used in ships.
It sets the technical requirements, the test methods, the inspection rules and the provisions on marking and packaging for such generators and for their excitation equipment, at rated powers of 3125 kVA and below, at 50 Hz and 60 Hz.
It applies to generators driven by internal combustion engines in the power stations of ships and of mobile and fixed offshore units, and it may be taken as a reference for turbine-driven generators, shaft generators and generators rated above 3125 kVA. It replaces JB/T 4271-1999, JB/T 4123-1999 and JB/T 4401.2-1999.
Found what you need?
Document preview — JB/T 4271-2011
National Standard of the People's Republic of China
- ICS
- 29.160
- Replacing
- JB/T 4401.2-1999
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 4271-2011 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 20 December 2011 and has been in force since 1 April 2012.
It replaces the earlier edition JB/T 4271-1999.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This standard is a recommended Chinese machinery industry standard giving the specification for three-phase synchronous generators used in ships. It sets the technical requirements, the test methods, the inspection rules and the provisions on marking and packaging for such generators and for their excitation equipment, at rated powers of 3125 kVA and below, at 50 Hz and 60 Hz. It applies to generators driven by internal combustion engines in the power stations of ships and of mobile and fixed offshore units, and it may be taken as a reference for turbine-driven generators, shaft generators and generators rated above 3125 kVA. It replaces JB/T 4271-1999, JB/T 4123-1999 and JB/T 4401.2-1999.
JB/T 4271-2011 falls under ICS 29.160, in the field of electrical engineering.
This catalogue holds 619 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 191-2008 — Packaging - Pictorial marking for handling of goods
GB 755-2008 — Rotating Electrical Machines - Rating and Performance
GB/T 997-2008 — Rotating electrical machines - Classification of types of construction, mounting arrangements and terminal box position (IM Code)
GB/T 1029-2005 — Test procedures for three-phase synchronous machines
GB/T 1958-2004 — [Replaced by GB/T 1958-2017] Geometrical Product Specifications (GPS) - Geometrical tolerance - Verification prescription
GB/T 1993-1993 — Cooling methods for rotating electrical machines
GB/T 2423.4-2008 — Environmental testing for electric and electronic products - Part 2: Test method - Test Db: Damp heat, cyclic (12 h + 12 h cycle)
GB/T 2423.16-2008 — Environmental testing - Part 2: Test methods - Test J and guidance: Mold growth
GB/T 2423.17-2008 — Environmental testing for electric and electronic products - Part 2: Test method - Test Ka: Salt mist
GB/T 2423.33-2005 — Environmental testing for electric and electronic products - Part 2: Test method - Test Kca: High concentration sulfur dioxide
GB/T 4772.1-1999 — Dimensions and output series for rotating electrical machines. Part 1: Frame numbers 56 to 400 and flange numbers 55 to 1 080
GB/T 4772.2-1999 — Dimensions and output series for rotating electrical machines. Part 2: Frame numbers 355 to 1 000 and flange numbers 1 180 to 2 360
GB/T 4772.3-1999 — Dimensions and output series for rotating electrical machines. Part 3: Samll built-in motors. Flange numbers BF10 to BF50
GB/T 4831-1984 — Specification for model of rotating electrical machines
GB/T 4942.1 -2006 — Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification
GB/T 7060-2008 — General specifications for rotary electrical machines in ships
GB 10068-2008
GB/T 10069.1-2006 — Measurement of airborne noise emitted by rotating electrical machines and the noise limits -- Part 1: Method for the measurement of airborne noise emitted by rotating electrical machines
GB/T 10250-2007 — Electrical and electronic installations in ships - Electromagnetic compatibility
GB/T 12975-2008 — General specification for synchronous generator in ship
GB 14048.1-2006 — Low-voltage switchgear and controlgear - Part 1: General rules
GB 14711-2006 — Safety requirements of small and medium size rotating electrical machines
GB/T 22714 -2008 — Test specifications of interturn insulation of form-wound winding for AC low-voltage electrical machines
GB/T 22715-2008 — Impulse voltage withstand levels of form-wound stator coils for rotating a.c. machines
GB/T 22717-2008 — Test specifications of interturn insulation of field pole coil and field winding for electrical machines
GB/T 22719.1-2008 — Interturn insulation of random-wound winding for AC low-voltage electrical machines - Part 1: Test methods
GB/T 22719.2-2008 — Interturn insulation of random-wound winding for AC low-voltage electrical machines - Part 2: Test limits
JB/T 4159-1999 — General technical requirements for electrical products for tropical use
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 16 pages
5 Related standards
Other editions:
JB/T 4271-1999 (earlier edition)
Standards on related subjects:
JB/T 1012-2017 — Specification for YY series capacitor-run induction motors
GB/T 12665-2017 — Requirements of damp-heat testing of electrical machine for service in general environmental condition
JB/T 9542-2015 — General specification for two-value capacitor asynchronous motors
JB/T 7841-2025 — YZZ series three-phase asynchronous motor with electromagnetic brake for elevator - Technical Specifications
JB/T 7564-2025 — YREZ series conical winding rotor brake three-phase asynchronous motor for crane - Technical Specifications
JB/T 7563-2025 — YZE series electromagnetic brake three-phase asynchronous motor for lifting and metallurgy - Technical Specifications
6 Classification and status
International classification (ICS): 29.160
Chinese Standard Classification (CCS): K 26
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 16 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191-2008Graphical symbols marking for handling and storage of packages
- GB 755-2008Rotating Electrical Machines - Rating and Performance
- GB/T 997-2008Classification of types of construction, mounting arrangements and terminal box position (IM Code) for rotating electrical machines
- GB/T 1029-2005Test procedures for three-phase synchronous machines
- GB/T 1958-2004Geometrical Product Specifications(GPS)—Geometrical tolerance—Verification
- GB/T 1993-1993Cooling methods for rotating electrical machines
Similar standards
Editions of JB/T 4271
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 4271-2011 | Specification for three-phase synchronous generator in ships | current edition | Current |
| JB/T 4401.2-1999 | Specification for three-phase synchronous generator in ships | previous edition | Superseded |
This page sells the current edition, JB/T 4271-2011. Earlier editions are listed for reference only.
How to Download JB/T 4271-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 14048.1-2006 — Low-voltage switchgear and controlgear - Part 1: General rules
GB 14711-2006 — Safety requirements of small and medium size rotating electrical machines
GB 755-2008 — Rotating Electrical Machines - Rating and Performance
JB/T 4271-2011
$285.00