JB/T 4014.1-2013Winding wires for submersible motors - Part 1: General requirements (English PDF)
潜水电机绕组线 第1部分：一般规定
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 4014.1-2013 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 31, 2013
Implementation date
July 1, 2014
Scope
JB/T 4014.1-2013 is the English-translated version of 潜水电机绕组线 第1部分：一般规定.
Winding wires for submersible motors are the subject of JB/T 4014.1-2013, the first part of a Chinese recommended machinery industry standard, which carries the general requirements.
It sets the general technical requirements for these wire products, the test methods, the inspection rules and the packaging. Its scope covers the water-resistant winding wires specified in JB/T 4014.2-2013, JB/T 4014.3-2013 and JB/T 4014.4-2013.
The part replaces the earlier edition JB/T 4014.1-1996 and is classified K12 in the Chinese system and 29.060.01 in the international one. Among the standards it quotes are GB/T 3953-2009, GB/T 4074.1 and many parts of GB/T 6109. It was issued by the Ministry of Industry and Information Technology.
Found what you need?
Document preview — JB/T 4014.1-2013
National Standard of the People's Republic of China
- ICS
- 29.060.01
- Replacing
- JB/T 4014.1-1996
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- Foreword
- Scope
- Normative references
- About this standard
- Related standards
- Classification and status
1 Foreword
JB/T 4014.1-2013 was issued by MIIT on 31 December 2013 and has been in force since 1 July 2014.
It replaces the earlier edition JB/T 4014.1-1996.
It is one of 7 parts of the JB/T 4014 series.
2 Scope
Winding wires for submersible motors are the subject of JB/T 4014.1-2013, the first part of a Chinese recommended machinery industry standard, which carries the general requirements. It sets the general technical requirements for these wire products, the test methods, the inspection rules and the packaging. Its scope covers the water-resistant winding wires specified in JB/T 4014.2-2013, JB/T 4014.3-2013 and JB/T 4014.4-2013. The part replaces the earlier edition JB/T 4014.1-1996 and is classified K12 in the Chinese system and 29.060.01 in the international one. Among the standards it quotes are GB/T 3953-2009, GB/T 4074.1 and many parts of GB/T 6109.
3 Normative references
JB/T 4014.1-2013 cites a number of standards, which apply in full or in part through the references made to them in its clauses. Those listed below are the ones the catalogue record shows; the record cuts the list short, so it may not be complete.
GB/T 3953-2009
GB/T 4074.1
GB/T 6109.1
GB/T 6109.2
GB/T 6109.3
GB/T 6109.4
GB/T 6109.5
GB/T 6109.6
GB/T 6109.7
GB/T 6109.9
GB/T 6109.10
GB/T 6109.11
GB/T 6109.12
GB/T 6109.13
GB/T 6109.14
GB/T 6109.15
GB/T 6109.16
GB/T 6109.17
GB/T 6109.
4 About this standard
Issued by: MIIT
English translation: about 15 pages
5 Related standards
Other parts of this standard:
JB/T 4014.2-1996 — Part 2: Polyethylene insulated nylon sheathed water-resistant winding wires of rated voltages up to and including 450/750 V
JB/T 4014.2-2013 — Part 2: Polyethylene insulated and nylon sheathed winding wires with rated voltages up to and including 450/750V
JB/T 4014.3-1996 — Part 3: PVC insulated water-resistant winding wires of rated voltages up to and including 600/1000 V
JB/T 4014.3-2013 — Part 3: Modified polypropylene insulated winding wires with rated voltages up to and including 450/750V
JB/T 4014.4-1996 — Part 4: Cross-linked polyethylene insulated nylon sheathed water-resistant winding wires of rated voltages up to and including 600/1000 V
JB/T 4014.4-2013 — Part 4: Cross-linking polyethylene insulated and nylon sheathed winding wires with rated voltages up to and including 600/1000V
Other editions:
JB/T 4014.1-1996 (earlier edition)
6 Classification and status
International classification (ICS): 29.060.01
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 3953-2009Round copper wire for electrical purposes
- GB/T 4074.1Test methods of winding wires - Part 1: General
- GB/T 6109.1Enamelled round winding wire - Part 1: General requirements
- GB/T 6109.2Enamelled round winding wire -- Part 2: Polyester enamelled round copper wire, class 155
- GB/T 6109.3Enamelled round winding wire -- Part 3: Polyvinyl acetal enamelled round copper wire, class 120
- GB/T 6109.4Enamelled round winding wire -- Part 4: Solderable polyurethane enamelled round copper wire, class 130
GB/T 6109.
Cited by
- JB/T 4014.2-2013Winding wires for submersible motors - Part 2: Polyethylene insulated and nylon sheathed winding wires with rated voltages up to and including 450/750V
- JB/T 4014.3-2013Winding wires for submersible motors - Part 3: Modified polypropylene insulated winding wires with rated voltages up to and including 450/750V
- JB/T 4014.4-2013Winding wires for submersible motors - Part 4: Cross-linking polyethylene insulated and nylon sheathed winding wires with rated voltages up to and including 600/1000V
Similar standards
Editions of JB/T 4014.1
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 4014.1-2013 | Winding wires for submersible motors - Part 1: General requirements | current edition | Current |
| JB/T 4014.1-1996 | Winding wires for submersible motors - Part 1: General requirements | previous edition | Superseded |
This page sells the current edition, JB/T 4014.1-2013. Earlier editions are listed for reference only.
How to Download JB/T 4014.1-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 4074.1-2024 — Test methods of winding wires - Part 1: General
GB/T 6109.1-2025 — Enamelled round winding wire - Part 1: General requirements
GB/T 6109.10-2008 — Enamelled round winding wire -- Part 10: Solderable polyurethane enamelled round copper wire, class 155
Secure payment via Stripe
Payments accepted
JB/T 4014.1-2013
$135.00