JB/T 1271-2014Shaft forgings for AC and DC electric machines - Technical specification (English PDF)
交、直流电机轴锻件 技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 1271-2014 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
July 9, 2014
Implementation date
November 1, 2014
Scope
JB/T 1271-2014 is the English-translated version of 交、直流电机轴锻件 技术条件.
Shaft forgings for AC and DC electric machines are dealt with in JB/T 1271-2014, a recommended technical specification of the Chinese machinery industry under classification J32.
It sets out what has to be stated when such forgings are ordered, the manufacturing process, the technical requirements, the inspection rules and test methods, and the inspection and quality certificates that accompany delivery.
It applies to shaft forgings ordered for alternating and direct current electric machines. Its references are largely analytical and mechanical: the chemical analysis series GB/T 223.9 and GB/T 223.11 onwards, GB/T 228.1, GB/T 229, GB/T 4336, GB/T 20066, JB/T 8467 and JB/T 8468.
It supersedes JB/T 1271-2002. Issued on 9 July 2014, it has applied since 1 November 2014.
Found what you need?
Document preview — JB/T 1271-2014
National Standard of the People's Republic of China
- ICS
- 77.140.85
- Replacing
- JB/T 1271-2002
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 1271-2014 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 9 July 2014 and has been in force since 1 November 2014.
It replaces the earlier edition JB/T 1271-2002, JB/T 1271-1993.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
Shaft forgings for AC and DC electric machines are dealt with in JB/T 1271-2014, a recommended technical specification of the Chinese machinery industry under classification J32. It sets out what has to be stated when such forgings are ordered, the manufacturing process, the technical requirements, the inspection rules and test methods, and the inspection and quality certificates that accompany delivery. It applies to shaft forgings ordered for alternating and direct current electric machines. Its references are largely analytical and mechanical: the chemical analysis series GB/T 223.9 and GB/T 223.11 onwards, GB/T 228.1, GB/T 229, GB/T 4336, GB/T 20066, JB/T 8467 and JB/T 8468. It supersedes JB/T 1271-2002.
JB/T 1271-2014 falls under ICS 77.140.85, in the field of metallurgy.
This catalogue holds 222 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 223.9
GB/T 228.1
GB/T 229
GB/T 4336
GB/T 20066
JB/T 8467
JB/T 8468
GB/T 223.11
GB/T 223.12
GB/T 223.13
GB/T 223.14
GB/T 223.16
GB/T 223.17
GB/T 223.18
GB/T 223.19
GB/T 223.20
GB/T 223.21
GB/T 223.22
GB/T 223.23
GB/T 223.25
GB/T 22
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Other editions:
JB/T 1271-2002 (earlier edition)
JB/T 1271-1993 (earlier edition)
Standards on related subjects:
GB/T 12362-2016 — Steel die forgings - Tolerance and machining allowance
GB/T 12361-2016 — Steel die forgings - General specification
JB/T 1270-1993 — Main shaft forgings for hydraulic turbines and hydrogenerators - Technical specifications
JB/T 1267-2014 — Rotor Forgings for 50MW to 200MW Turbine Generators - Technical Specification
JB/T 1266-2014 — Disc and wheel forgings for 25 MW to 200 MW steam turbines - Technical requirements
JB/T 1265-2014 — Rotor and shaft forgings for 25 MW to 200 MW steam turbines - Technical requirements
6 Classification and status
International classification (ICS): 77.140.85
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 223.9Iron, steel and alloy -- Determination of aluminium content -- Chrome azurol S photometric method
- GB/T 228.1Metallic Materials — Tensile Testing — Part 1: Method of Test at Room Temperature
- GB/T 229Metallic Materials — Charpy Pendulum Impact Test Method
- GB/T 4336Carbon and low-alloy steel—Determination of multi-element contents—Spark discharge atomic emission spectrometric method (routine method)
- GB/T 20066Steel and iron -- Sampling and preparation of samples for the determination of chemical composition
- JB/T 8467Ultrasonic Testing for Steel Forgings
Similar standards
Editions of JB/T 1271
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 1271-2014 | Shaft forgings for AC and DC electric machines - Technical specification | current edition | Current |
| JB/T 1271-2002 | Shaft forgings for AC and DC electric machines - Technical specification | previous edition | Superseded |
This page sells the current edition, JB/T 1271-2014. Earlier editions are listed for reference only.
How to Download JB/T 1271-2014
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 20066-2006 — Steel and iron -- Sampling and preparation of samples for the determination of chemical composition
GB/T 22-1976 — Bolts, small hexagon head with fit neck
GB/T 223.11-1991 — Methods for chemical analysis of iron, steel and alloy--The ammonium persulfate oxidation volumetric method for the determination of chromium content
JB/T 1271-2014
$115.00