JB/T 10095-2010Charging equipment for industrial batteries (English PDF)
工业电池用充电设备
This is a limited preview
Buy now to download the full PDF (18 pages)
Need quotation for your management?
Get a formal quotation for JB/T 10095-2010 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
February 11, 2010
Implementation date
July 1, 2010
Scope
JB/T 10095-2010 is the English-translated version of 工业电池用充电设备.
JB/T 10095-2010 is a recommended Chinese machinery industry standard for charging equipment used with industrial batteries. It sets out terminology and definitions, basic parameters, technical requirements, inspection and testing, and provisions for marking, packaging, transport and storage.
It covers equipment with a direct-current output of 1 kW and above at a DC voltage level of 1000 V or less, charging lead-acid, lithium or similar batteries in electric cars and other electric vehicles, in battery formation and in comparable battery-powered devices.
Charging for piers, docks and other marine uses, for household appliances and emergency lighting, and for fire pumps and fire engines falls outside it, as does fast charging of lean-solution lead-acid batteries.
Among the standards it quotes are GB 4208 and DL/T 857. It replaces JB/T 10095-1999.
Found what you need?
Document preview — JB/T 10095-2010
National Standard of the People's Republic of China
- ICS
- 29.200
- Replacing
- JB/T 10095-1999
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 10095-2010 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 11 February 2010 and has been in force since 1 July 2010.
It replaces the earlier edition JB/T 10095-1999.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This standard is a recommended Chinese machinery industry standard for charging equipment used with industrial batteries. It sets out terminology and definitions, basic parameters, technical requirements, inspection and testing, and provisions for marking, packaging, transport and storage. It covers equipment with a direct-current output of 1 kW and above at a DC voltage level of 1000 V or less, charging lead-acid, lithium or similar batteries in electric cars and other electric vehicles, in battery formation and in comparable battery-powered devices. Charging for piers, docks and other marine uses, for household appliances and emergency lighting, and for fire pumps and fire engines falls outside it, as does fast charging of lean-solution lead-acid batteries. Among the standards it quotes are GB 4208 and DL/T 857. It replaces JB/T 10095-1999.
JB/T 10095-2010 falls under ICS 29.200, in the field of electrical engineering.
This catalogue holds 619 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 2423.5-1995 — Environmental testing for electric and electronic products - Part 2: Test methods - Test Ea and guidance: Shock
GB/T 2423.8-1995 — Environmental testing for electric and electronic products - Part 2: Test methods - Test Ed: Free fall
GB/T 3859.1-1993 — Semiconductor convertors. Specification of basic requirements
GB/T 3859.2-1993 — Semiconductor convertors. Application guide
GB/T 3859.3-1993 — Semiconductor convertors. Transformers and reactors
GB 4208-2008 — Degrees of Protection Provided By Enclosure (IP Code)
GB/T 6113.101-2008 — Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-1: Radio disturbance and immunity measuring apparatus - Measuring apparatus
GB 9254 - 2008 — Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement
GB/T 13384-2008 — General specifications for packing of mechanical and electrical product
GB/T 13422-1992 — Power semiconductor converters--Electrical test methods
GB/T 14549
GB 17625.1-2003 — [Replaced by GB 17625.1-2012] Electromagnetic compatibility limits - Limits for harmonic current emissions (equipment input current 16 A per phase)
GB/Z 17625.6-2003 — Electromagnetic compatibility - Limits - Limitation of emission of harmonic currents in low-voltage power supply systems for equipment with rated current greater than 16A
GB/T 17626.3-2006 — Electromagnetic compatibility - Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test
GB/T 17626.4-2008 — Electromagnetic compatibility - Testing and measurement techniques - Electrical fast transient/burst immunity test
GB/T 17626.5-2008 — Electromagnetic compatibility - Testing and measurement techniques - Surge immunity test
GB/T 17626.12-1998 — Electromagnetic compatibility--Testing and measurement techniques--Oscillatory waves immunity test
DL/T 857-2004 — Specification of rectification inversion equipment for battery of power plant and substation
JB/T 8636-1997 — Power converter transformers
4 Where this standard sits
It cites 19 standards, among them GB/T 2423.5-1995, GB/T 2423.8-1995, GB/T 3859.1-1993, listed in full above.
One other standard in this catalogue cites it: JB/T 10979-2010.
5 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 18 pages
6 Related standards
Other editions:
JB/T 10095-1999 (earlier edition)
Standards on related subjects:
GB/T 31487.3-2015 — Direct current de-icing devices -- Part 3: Tests
GB/T 3859.1-2013 — Semiconductor converters -- General requirements and line commutated Converters -- Part 1-1: Specification of basic requirements
GB/T 13422-2013 — Semiconductor converters - Electrical test methods
JB/T 14937.1-2025 — Uninterruptible power supply devices for platform doors of urban rail transit - Part 1: Technical requirements
JB/T 14052-2025 — Bidirectional converter for DC energy storage system
JB/T 14049-2025 — Low-voltage static reactive power generator
7 Classification and status
International classification (ICS): 29.200
Chinese Standard Classification (CCS): K 46
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 18 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 2423.5-1995Environmental testing - Part 2: Test methods - Test Ea and guidance: Shock
- GB/T 2423.8-1995Environmental testing for electric and electronic products - Part 2: Test methods - Test Ed: Free fall
- GB/T 3859.1-1993Semiconductor converters -- General requirements and line commutated Converters -- Part 1-1: Specification of basic requirements
- GB/T 3859.2-1993Semiconductor converters -- General requirements and line commutated converters -- Part 1-2: Application guide
- GB/T 3859.3-1993Semiconductor converters -- General requirements and line commutated converters -- Part 1-3: Transformers and reactors
- GB 4208-2008Degrees of Protection Provided By Enclosure (IP Code)
Similar standards
Editions of JB/T 10095
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 10095-2010 | Charging equipment for industrial batteries | current edition | Current |
| JB/T 10095-1999 | Charging equipment for industrial batteries | previous edition | Superseded |
This page sells the current edition, JB/T 10095-2010. Earlier editions are listed for reference only.
How to Download JB/T 10095-2010
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
DL/T 857-2004 — Specification of rectification inversion equipment for battery of power plant and substation
GB 17625.1-2003 — [Replaced by GB 17625.1-2012] Electromagnetic compatibility limits - Limits for harmonic current emissions (equipment input current 16 A per phase)
GB 4208-2008 — Degrees of Protection Provided By Enclosure (IP Code)
JB/T 10095-2010
$315.00