Valid

HG/T 3056-2006Conveyor belts - General rules for storage and handling (English PDF)

输送带贮存和搬运通则

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for HG/T 3056-2006 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

July 26, 2006

Implementation date

March 1, 2007

Scope

HG/T 3056-2006 is the English-translated version of 输送带贮存和搬运通则.

HG/T 3056-2006 gives the Chinese chemical industry its guidance on the storage and handling of conveyor belts, as a recommended standard identical in content to ISO 5285-2004.

It sets out the conditions under which conveyor belting is best kept and the way it should be handled. Light conveyor belts covered by the European standard EN 873 are outside what it addresses.

It is classified 53.040.20 internationally, among the standards for conveyor belting, and ISO 2230 is quoted within the text. The standard replaces HG/T 3056-1986. Issued on 26 July 2006, it has applied since 1 March 2007.

Found what you need?

Document preview — HG/T 3056-2006

National Standard of the People's Republic of China

ICS
53.040.20
Replacing
HG/T 3056-1986

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative References
  • 3 Terms and definitions
  • 4 Molecular formula and relative molecular mass
  • 5 Classification
  • 6 Test methods
  • 6.1 General provisions
  • 6.2 Appearance inspection
  • 7 Inspection Rules
  • 9 Marking and accompanying documents

1 Foreword

HG/T 3056-2006 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 26 July 2006 and has been in force since 1 March 2007.

It replaces the earlier edition HG/T 3056-1986.

The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

HG/T 3056-2006 gives the Chinese chemical industry its guidance on the storage and handling of conveyor belts, as a recommended standard identical in content to ISO 5285-2004. It sets out the conditions under which conveyor belting is best kept and the way it should be handled. Light conveyor belts covered by the European standard EN 873 are outside what it addresses. It is classified 53.040.20 internationally, among the standards for conveyor belting, and ISO 2230 is quoted within the text. The standard replaces HG/T 3056-1986.

HG/T 3056-2006 falls under ICS 53.040.20, in the field of materials handling equipment.

This catalogue holds 18 other HG/T standards in that field.

In this catalogue, HG/T standards carry edition years from 1975 to 2026.

3 Normative references

ISO 2230

4 Where this standard sits

It cites one other standard, ISO 2230, listed in full above.

9 other standards in this catalogue cite it, among them GB/T 10822-2014, GB/T 7984-2013, GB/T 9770-2013.

5 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

6 Related standards

Other editions:

HG/T 3056-1986 (earlier edition)

Standards on related subjects:

GB/T 3683-2023 — Rubber hoses and hose assemblies - Wire-braid-reinforced hydraulic types for oil-based or water-based fluids - Specification

GB/T 3685-2017 — Conveyor belts -- Laboratory scale flammability characteristics -- Test method

GB/T 2550-2016 — Gas welding equipment -- Rubber hoses for welding, cutting and allied processes

HG/T 3047-2024 — Determination of air permeability of rubber or plastic coated fabrics

HG/T 3052-2022 — Rubber- or plastics-coated fabrics - Determination of coating adhesion strength

HG/T 3050.1-2020 — Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 1: Methods for determination of length, width and net mass

7 Classification and status

International classification (ICS): 53.040.20

Chinese Standard Classification (CCS): G 40

Prefix HG/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

Editions of HG/T 3056

EditionTitleRevisionStatus
HG/T 3056-2006Conveyor belts - General rules for storage and handlingcurrent editionCurrent
HG/T 3056-1986Conveyor belts - General rules for storage and handlingprevious editionSuperseded

This page sells the current edition, HG/T 3056-2006. Earlier editions are listed for reference only.

How to Download HG/T 3056-2006

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

HG/T 3056-2006

$95.00