Valid

HG/T 4732-2014Burn resistant conveyor belts (English PDF)

耐灼烧输送带

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for HG/T 4732-2014 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

December 24, 2014

Implementation date

June 1, 2015

Scope

HG/T 4732-2014 is the English-translated version of 耐灼烧输送带.

The Chinese chemical industry standard HG/T 4732-2014 deals with burn resistant conveyor belts. It classifies the products and then sets out the requirements, the testing, and the rules for marking, packaging, transport and storage.

Its scope is the fabric-core conveyor belt running on flat or troughed idlers, the construction used where a belt must resist burning in service. The standard quotes HG/T 2194, HG/T 2410, HG/T 3046 and HG/T 3056, and it cites GB/T 528, GB/T 3512, GB/T 3690, GB/T 5752, GB/T 6759, GB/T 7983, GB/T 7984 and GB/T 20021. Issued on 24 December 2014, it has applied since 1 June 2015.

Found what you need?

Document preview — HG/T 4732-2014

National Standard of the People's Republic of China

ICS
53.040.20

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative References
  • 3 Terms and definitions
  • 4 Molecular formula and relative molecular mass
  • 5 Classification
  • 6 Test methods
  • 6.1 General provisions
  • 6.2 Appearance inspection
  • 7 Inspection Rules
  • 9 Marking and accompanying documents

1 Foreword

HG/T 4732-2014 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 24 December 2014 and has been in force since 1 June 2015.

The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

The document runs to 15 pages in English translation.

2 Scope Preview

The Chinese chemical industry standard HG/T 4732-2014 deals with burn resistant conveyor belts. It classifies the products and then sets out the requirements, the testing, and the rules for marking, packaging, transport and storage. Its scope is the fabric-core conveyor belt running on flat or troughed idlers, the construction used where a belt must resist burning in service. The standard quotes HG/T 2194, HG/T 2410, HG/T 3046 and HG/T 3056, and it cites GB/T 528, GB/T 3512, GB/T 3690, GB/T 5752, GB/T 6759, GB/T 7983, GB/T 7984 and GB/T 20021.

HG/T 4732-2014 falls under ICS 53.040.20, in the field of materials handling equipment.

This catalogue holds 18 other HG/T standards in that field.

In this catalogue, HG/T standards carry edition years from 1975 to 2026.

3 Normative references

GB/T 528-2009 — Rubber, vulcanized or thermoplastic -- Determination of tensile stress-strain properties

GB/T 3512-2001 — Rubber, vulcanized or thermoplastic - Accelerated ageing and heat resistance tests - Air-oven method

GB/T 3690-2009 — Textile conveyor belts - Full thickness tensile strength, elongation at break and elongation at the reference load - Test method

GB/T 5752-2013 — Conveyor belts -- Marking

GB/T 6759-2013 — Conveyor belts -- Adhesion between constitutive elements -- Test methods

GB/T 7983-2013 — Conveyor belts -- Transverse flexibility (troughability) -- Test method

GB/T 7984-2013 — Conveyor belts of textile construction for general use

GB/T 20021-2005 — Heat resistant conveyor belts of duck construction

HG/T 2194-2006 — y type conveyor belts. Characteristics of construction

HG/T 2410-2006 — Conveyor belts. Sampling

HG/T 3046

HG/T 3056-2006 — Conveyor belts - General rules for storage and handling

4 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

5 Related standards

Standards on related subjects:

GB/T 5563-2025 — Rubber and plastics hoses and hose assemblies - Hydrostatic testing

GB/T 5563-2013 — Rubber and plastics hoses and hose assemblies -- Hydrostatic testing

GB/T 5564-2006 — Rubber and plastics hoses -- Sub ambient temperature flexibility tests

HG/T 6164.2-2026 — Large-diameter layflat rubber hose for fluid transmission-Specification - Part 2: Oil delivery hoses

HG/T 2014-2025 — Acoustics - Hearing protectors - Part 5: Method for estimation of noise reduction using fitting by inexperienced test subjects

HG/T 3047-2024 — Determination of air permeability of rubber or plastic coated fabrics

6 Classification and status

International classification (ICS): 53.040.20

Prefix HG/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download HG/T 4732-2014

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

HG/T 4732-2014

$115.00