Valid

HG/T 3646-2014Tear resistant steel cord conveyor belts for general use (English PDF)

普通用途抗撕裂钢丝绳芯输送带

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for HG/T 3646-2014 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

December 24, 2014

Implementation date

June 1, 2015

Scope

HG/T 3646-2014 is the English-translated version of 普通用途抗撕裂钢丝绳芯输送带.

General purpose tear resistant steel cord conveyor belts are covered by HG/T 3646-2014, a recommended standard of the Chinese chemical industry. It classifies the product and then sets the technical requirements, the test methods and the inspection rules, before the clauses on marking, packaging, transport and storage.

The belts concerned are the steel cord type built to resist tearing in general service. GB/T 5752-2013, GB/T 5753-2013, GB/T 5754.2-2005, GB/T 5755-2013, GB/T 9770-2013, GB/T 28267.1-2012 and HG/T 2410-2006 are among the documents it quotes.

It takes the place of HG/T 3646-1999. Issued on 24 December 2014, it has applied since 1 June 2015.

Found what you need?

Document preview — HG/T 3646-2014

National Standard of the People's Republic of China

ICS
53.040.20
Replacing
HG/T 3646-1999

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative References
  • 3 Terms and definitions
  • 4 Molecular formula and relative molecular mass
  • 5 Classification
  • 6 Test methods
  • 6.1 General provisions
  • 6.2 Appearance inspection
  • 7 Inspection Rules
  • 9 Marking and accompanying documents

1 Foreword

HG/T 3646-2014 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 24 December 2014 and has been in force since 1 June 2015.

It replaces the earlier edition HG/T 3646-1999.

The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

General purpose tear resistant steel cord conveyor belts are covered by HG/T 3646-2014, a recommended standard of the Chinese chemical industry. It classifies the product and then sets the technical requirements, the test methods and the inspection rules, before the clauses on marking, packaging, transport and storage. The belts concerned are the steel cord type built to resist tearing in general service. GB/T 5752-2013, GB/T 5753-2013, GB/T 5754.2-2005, GB/T 5755-2013, GB/T 9770-2013, GB/T 28267.1-2012 and HG/T 2410-2006 are among the documents it quotes. It takes the place of HG/T 3646-1999.

HG/T 3646-2014 falls under ICS 53.040.20, in the field of materials handling equipment.

This catalogue holds 18 other HG/T standards in that field.

In this catalogue, HG/T standards carry edition years from 1975 to 2026.

3 Normative references

GB/T 528-2009 — Rubber, vulcanized or thermoplastic -- Determination of tensile stress-strain properties

GB/T 3512-2001 — Rubber, vulcanized or thermoplastic - Accelerated ageing and heat resistance tests - Air-oven method

GB/T 5752-2013 — Conveyor belts -- Marking

GB/T 5753-2013 — Steel cord conveyor belts -- Methods for the determination of total thickness and cover thickness

GB/T 5754.2-2005 — Steel cord conveyor belts - Longitudinal traction test - Part 2: Measurement of tensile strength

GB/T 5755-2013 — Steel cord conveyor belts - Cord-to-coating bond test - Initial test and after thermal treatment

GB/T 6759-2013 — Conveyor belts -- Adhesion between constitutive elements -- Test methods

GB/T 7983-2013 — Conveyor belts -- Transverse flexibility (troughability) -- Test method

GB/T 9770-2013 — Steel cord conveyor belts for general use

GB/T 9867-2008 — Rubber, vulcanized or thermoplastic -- Determination of abrasion resistance using a rotating cylindrical drum device

GB/T 28267.1-2012 — Steel cord conveyor belts - Part 1: Design, dimensions and mechanical requirements for conveyor belts for general use

HG/T 2410-2006 — Conveyor belts. Sampling

HG/T 3056-2006 — Conveyor belts - General rules for storage and handling

4 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

5 Related standards

Other editions:

HG/T 3646-1999 (earlier edition)

Standards on related subjects:

GB/T 3683-2023 — Rubber hoses and hose assemblies - Wire-braid-reinforced hydraulic types for oil-based or water-based fluids - Specification

GB/T 3685-2017 — Conveyor belts -- Laboratory scale flammability characteristics -- Test method

GB/T 2550-2016 — Gas welding equipment -- Rubber hoses for welding, cutting and allied processes

HG/T 6164.2-2026 — Large-diameter layflat rubber hose for fluid transmission-Specification - Part 2: Oil delivery hoses

HG/T 2014-2025 — Acoustics - Hearing protectors - Part 5: Method for estimation of noise reduction using fitting by inexperienced test subjects

HG/T 3647-2014 — Cold resistant conveyor belts

6 Classification and status

International classification (ICS): 53.040.20

Prefix HG/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

Editions of HG/T 3646

EditionTitleRevisionStatus
HG/T 3646-2014Tear resistant steel cord conveyor belts for general usecurrent editionCurrent
HG/T 3646-1999Tear resistant steel cord conveyor belts for general useprevious editionSuperseded

This page sells the current edition, HG/T 3646-2014. Earlier editions are listed for reference only.

How to Download HG/T 3646-2014

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

HG/T 3646-2014

$165.00