Valid

HG/T 3046-2011Conveyor belts with textile carcass - Specification for appearance quality (English PDF)

织物芯输送带外观质量规定

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for HG/T 3046-2011 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

December 20, 2011

Implementation date

July 1, 2012

Scope

HG/T 3046-2011 is the English-translated version of 织物芯输送带外观质量规定.

HG/T 3046-2011 is the recommended Chinese chemical industry standard on the appearance quality of conveyor belts with a textile carcass. It states the appearance quality requirements for such belts and also gives the method by which surface defects are measured.

It applies to rubber conveyor belts with a textile core, and it does not apply to patterned belts, steel-cord belts, solid plastic belts or whole-core flame-resistant covered belts.

It quotes GB/T 5756. It replaces HG/T 3046-1999. Issued on 20 December 2011, it has applied since 1 July 2012.

Found what you need?

Document preview — HG/T 3046-2011

National Standard of the People's Republic of China

ICS
53.040.20
Replacing
HG/T 3046-1999

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative References
  • 3 Terms and definitions
  • 4 Molecular formula and relative molecular mass
  • 5 Classification
  • 6 Test methods
  • 6.1 General provisions
  • 6.2 Appearance inspection
  • 7 Inspection Rules
  • 9 Marking and accompanying documents

1 Foreword

HG/T 3046-2011 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 20 December 2011 and has been in force since 1 July 2012.

It replaces the earlier edition HG/T 3046-1999.

The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

This standard is the recommended Chinese chemical industry standard on the appearance quality of conveyor belts with a textile carcass. It states the appearance quality requirements for such belts and also gives the method by which surface defects are measured. It applies to rubber conveyor belts with a textile core, and it does not apply to patterned belts, steel-cord belts, solid plastic belts or whole-core flame-resistant covered belts. It quotes GB/T 5756. It replaces HG/T 3046-1999.

HG/T 3046-2011 falls under ICS 53.040.20, in the field of materials handling equipment.

This catalogue holds 18 other HG/T standards in that field.

In this catalogue, HG/T standards carry edition years from 1975 to 2026.

3 Normative references

GB/T 5756

4 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

5 Related standards

Other editions:

HG/T 3046-1999 (earlier edition)

Standards on related subjects:

GB/T 3683-2023 — Rubber hoses and hose assemblies - Wire-braid-reinforced hydraulic types for oil-based or water-based fluids - Specification

GB/T 3685-2017 — Conveyor belts -- Laboratory scale flammability characteristics -- Test method

GB/T 2550-2016 — Gas welding equipment -- Rubber hoses for welding, cutting and allied processes

HG/T 3047-2024 — Determination of air permeability of rubber or plastic coated fabrics

HG/T 3041-2023 — Rubber hoses and hose assemblies for fuel delivery by tank truck

HG/T 3038-2023 — Rubber hoses and hose assemblies for oil suction and discharge - Specification

6 Classification and status

International classification (ICS): 53.040.20

Chinese Standard Classification (CCS): G 42

Prefix HG/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

Editions of HG/T 3046

EditionTitleRevisionStatus
HG/T 3046-2011Conveyor belts with textile carcass - Specification for appearance qualitycurrent editionCurrent
HG/T 3046-1999Conveyor belts with textile carcass - Specification for appearance qualityprevious editionSuperseded

This page sells the current edition, HG/T 3046-2011. Earlier editions are listed for reference only.

How to Download HG/T 3046-2011

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

HG/T 3046-2011

$145.00