HG/T 2805-2012Solid woven flame-retardant conveyor belts for underground coal mines (English PDF)
煤矿井下用织物整芯阻燃输送带
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 2805-2012 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 28, 2012
Implementation date
June 1, 2013
Scope
HG/T 2805-2012 is the English-translated version of 煤矿井下用织物整芯阻燃输送带.
HG/T 2805-2012 belongs to the Chinese chemical industry series and deals with solid woven flame-retardant conveyor belts for underground coal mines. It classifies the product and then sets the technical requirements, the test methods, the inspection rules and the provisions for marking, packaging, storage and transport.
It is written for belts running on conveyors in underground coal workings. The standard quotes GB/T 528-2009, GB/T 3684-2006, GB/T 3685-2009, GB/T 3690-2009, GB/T 4490-2009, GB/T 5752-2002, GB/T 7985-2005, GB/T 7986-1997, GB/T 9867-1988, GB/T 12736-2009, GB 21352-2008, HG/T 2410-2006, HG/T 3056-2006 and ISO 583-2007.
It supersedes HG 2805-1996. Issued on 28 December 2012, it has applied since 1 June 2013.
Found what you need?
Document preview — HG/T 2805-2012
National Standard of the People's Republic of China
- ICS
- 53.040.20
- Replacing
- HG 2805-1996
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative References
- 3 Terms and definitions
- 4 Molecular formula and relative molecular mass
- 5 Classification
- 6 Test methods
- 6.1 General provisions
- 6.2 Appearance inspection
- 7 Inspection Rules
- 9 Marking and accompanying documents
1 Foreword
HG/T 2805-2012 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 28 December 2012 and has been in force since 1 June 2013.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
HG/T 2805-2012 belongs to the Chinese chemical industry series and deals with solid woven flame-retardant conveyor belts for underground coal mines. It classifies the product and then sets the technical requirements, the test methods, the inspection rules and the provisions for marking, packaging, storage and transport. It is written for belts running on conveyors in underground coal workings. The standard quotes GB/T 528-2009, GB/T 3684-2006, GB/T 3685-2009, GB/T 3690-2009, GB/T 4490-2009, GB/T 5752-2002, GB/T 7985-2005, GB/T 7986-1997, GB/T 9867-1988, GB/T 12736-2009, GB 21352-2008, HG/T 2410-2006, HG/T 3056-2006 and ISO 583-2007. It supersedes HG 2805-1996.
HG/T 2805-2012 falls under ICS 53.040.20, in the field of materials handling equipment.
This catalogue holds 18 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB/T 528-2009 — Rubber, vulcanized or thermoplastic -- Determination of tensile stress-strain properties
GB/T 3684-2006 — Conveyor belts - Electrical conductivity - Specification and method of test
GB/T 3685-2009 — Conveyor belts - Laboratory scale flammability characteristics - Requirements and test method
GB/T 3690-2009 — Textile conveyor belts - Full thickness tensile strength, elongation at break and elongation at the reference load - Test method
GB/T 4490-2009 — Conveyor belts with textile carcass - Widths and lengths
GB/T 5752-2002 — Conveyor belts - Marking
GB/T 7985-2005 — Conveyor belts - Method for the determination of the tear propagation resistance of textile conveyor belts
GB/T 7986-1997 — Conveyor belts--Drum friction--Method of test
GB/T 9867-1988 — Rubber--Determination of abrasion resistance using a rotating cylinderical drum device
GB/T 12736-2009 — Conveyor belts - Determination of strength of mechanical fastenings - Static test method
GB 21352-2008 — Flame retardant steel cord conveyor belts used in underground mines
HG/T 2410-2006 — Conveyor belts. Sampling
HG/T 3056-2006 — Conveyor belts - General rules for storage and handling
ISO 583-2007
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
GB/T 3683-2023 — Rubber hoses and hose assemblies - Wire-braid-reinforced hydraulic types for oil-based or water-based fluids - Specification
GB/T 3685-2017 — Conveyor belts -- Laboratory scale flammability characteristics -- Test method
GB/T 2550-2016 — Gas welding equipment -- Rubber hoses for welding, cutting and allied processes
HG/T 6164.2-2026 — Large-diameter layflat rubber hose for fluid transmission-Specification - Part 2: Oil delivery hoses
HG/T 2799-2011 — Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquids - Specification
HG/T 2809-2009 — Seal installation for oil storaged tanks. Rubber seal belt
6 Classification and status
International classification (ICS): 53.040.20
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 528-2009Rubber, vulcanized or thermoplastic -- Determination of tensile stress-strain properties
- GB/T 3684-2006Conveyor belts - Electrical conductivity - Specification and test method
- GB/T 3685-2009Conveyor belts—Laboratory scale flammability characteristics—Requirements and test method
- GB/T 3690-2009Textile conveyor belts - Full thickness tensile strength, elongation at break and elongation at the reference load - Test method
- GB/T 4490-2009Conveyor belts with textile carcass - Widths and lengths
- GB/T 5752-2002Conveyor belts -- Marking
ISO 583-2007
Similar standards
Editions of HG/T 2805
| Edition | Title | Revision | Status |
|---|---|---|---|
| HG/T 2805-2012 | Solid woven flame-retardant conveyor belts for underground coal mines | current edition | Current |
| HG 2805-1996 | Solid woven flame-retardant conveyor belts for underground coal mines | previous edition | Superseded |
This page sells the current edition, HG/T 2805-2012. Earlier editions are listed for reference only.
How to Download HG/T 2805-2012
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 21352-2008 — Flame retardant steel cord conveyor belts used in underground mines
GB/T 12736-2009 — Conveyor belts - Determination of strength of mechanical fastenings - Static test method
GB/T 3684-2006 — Conveyor belts - Electrical conductivity - Specification and method of test
HG/T 2805-2012
$135.00