Valid

HG/T 4224-2011Pipe conveyor belts with steel cord carcass (English PDF)

钢丝绳芯管状输送带

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for HG/T 4224-2011 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

December 20, 2011

Implementation date

July 1, 2012

Scope

HG/T 4224-2011 is the English-translated version of 钢丝绳芯管状输送带.

HG/T 4224-2011 is the Chinese standard "Pipe conveyor belts with steel cord carcass".

Its scope clause reads: This standard specifies the product classification, technical requirements, test methods, inspection rules, packaging, marking, storage and transport of pipe conveyor belts of steel cord construction with rubber cover (hereinafter referred to as “belt").

This standard is applicable to pipe conveyor belts of steel cord construction in the working environment with a temperature falling within -20°C~ 40°C. This standard is not applicable to troughed conveyor belts for conveying materials. Its clauses include terms and definitions; product classification.

Found what you need?

Document preview — HG/T 4224-2011

National Standard of the People's Republic of China

ICS
53.040.20

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • Foreword i
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Product classification
  • 5 Technical requirements
  • 6 Test methods
  • 7 Inspection rules
  • 8 Marking, packaging, storage and transport
  • Annex A (Normative) Transverse rigidity determination method

1 Scope

This standard specifies the product classification, technical requirements, test methods, inspection rules, packaging, marking, storage and transport of pipe conveyor belts of steel cord construction with rubber cover (hereinafter referred to as “belt").

This standard is applicable to pipe conveyor belts of steel cord construction in the working environment with a temperature falling within -20°C~ 40°C.

This standard is not applicable to troughed conveyor belts for conveying materials.

2 Normative references

The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.

GB/T 528-2009 Rubber, vulcanized or thermoplastic - Determination of tensile stress-strain properties (idt ISO 37: 2005)

GB/T 3512 Rubber, vulcanized or thermoplastic - Accelerated ageing and heat resistance tests - Air-oven method (GB/T 3512-2001, eqv ISO 188: 1998)

GB/T 4490 Conveyor belts with textile carcass - Widths and lengths (idt GB/T 4490- 2009, ISO 251: 2003)

GB/T 5752 Conveyor belts - Marking (GB/T 5752- 2002, eqv ISO 433: 1991)

GB/T 5753 Steel cord conveyor belts - Methods for the determination of total thickness and cover thickness (idt GB/T 5753-2008, ISO 7590: 2001)

GB/T 5754.2 Steel cord conveyor belts - Longitudinal traction test - Part 2: Measurement of tensile strength (idt GB/T 5754.2-2005, ISO 7622-2: 1984)

GB/T 5755 Steel cord conveyor belts - Cable-to-coating bond test (GB/T 5755-2000, eqv ISO 7623: 1996)

GB/T 5756 Conveyor belts - Terms and definition (neq GB/T 5756-2009, ISO 5284: 1986)

GB/T 7762 Rubber, vulcanized or thermoplastic - Resistance to ozone cracking - Static strain testing (mod GB/T 7762 2003, ISO 1431-1: 1989)

GB/T 9770 Steel cord conveyor belts for general use

GB/T 9867 Rubber vulcanized or thermoplastic - Determination of abrasion resistance using a rotating cylindrical drum device (idt GB/T 9867-2008, ISO 4649: 2002)

GB/T 17044 Steel cord conveyor belts - Adhesion strength test of the cover to the core layer (GB/T17044-1997, eqv ISO 8094: 1984)

HG/T 2410 Conveyor belts - Sampling (idt HG/T 2410-2006, ISO 282: 1992)

HG/T 3056 Conveyor belts - Guide to storage and handling (idt HG/T 3056-2006, ISO 5285: 2004)

3 Terms and definitions

For the purposes of this document, the terms and definitions given in GB/T 5756 and the following ones apply.

3.1 tube diameter

nominal diameter of the outer circle of a tubular conveyor belt after a tube is formed by both sides

3.2 transverse rigidity

force rebounding outward from the overlap joint at both transverse ends

4 Product classification

4.1 Specification

The specifications of the belt shall be distinguished according to the tube diameter of the belt, the longitudinal tensile strength of the belt and the width of the belt.

4.1.1 Tube diameter of belt

The tube diameter of belt shall be indicated by “Phi" in millimeters (mm), as shown in Table […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download HG/T 4224-2011

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

HG/T 4224-2011

$105.00