Valid

HG/T 20642-2011Specification for design of refractory ceramic fibre linings for chemical industrial furnaces (English PDF)

化学工业炉耐火陶瓷纤维炉衬设计技术规定

Preview PDF

This is a limited preview

Buy now to download the full PDF (28 pages)

Need quotation for your management?

Get a formal quotation for HG/T 20642-2011 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

May 18, 2011

Implementation date

June 1, 2011

Scope

HG/T 20642-2011 is the English-translated version of 化学工业炉耐火陶瓷纤维炉衬设计技术规定.

The recommended standard HG/T 20642-2011 covers the design of refractory ceramic fibre linings for chemical industrial furnaces.

It applies to general chemical furnaces whose temperature does not exceed 1300 °C. Positive-pressure furnaces and incinerators handling highly corrosive flue gas are outside its reach, as are rotary kilns and other furnaces whose lining is in direct contact with moving material or with flue gas carrying a heavy load of ash and particulates.

It draws on a mixed body of Chinese and foreign documents, among them GB/T 902.2, GB/T 902.3, GB/T 983, GB/T 2091, GB/T 3003, GB/T 4209, GB/T 5117, GB/T 16400, HG/T 20525, HG/T 20544, HG 20581, HG/T 20683, HG/T 20684, ISO 13918, API STD.560-2007, ASTM C201-1993 and ASTM C356.

It replaces HG/T 20642-1998 and, issued on 18 May 2011, it has applied since 1 June 2011.

Found what you need?

Document preview — HG/T 20642-2011

National Standard of the People's Republic of China

ICS
71.120
Replacing
HG/T 20642-1998

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Molecular formula and relative molecular mass
  • 5 Classification
  • 6 Test methods
  • 6.1 General provisions
  • 6.2 Appearance inspection
  • 7 Inspection rules
  • 9 Marking and accompanying documents

1 Foreword

HG/T 20642-2011 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 18 May 2011 and has been in force since 1 June 2011.

It replaces the earlier edition HG/T 20642-1998.

The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

The recommended standard HG/T 20642-2011 covers the design of refractory ceramic fibre linings for chemical industrial furnaces. It applies to general chemical furnaces whose temperature does not exceed 1300 °C. Positive-pressure furnaces and incinerators handling highly corrosive flue gas are outside its reach, as are rotary kilns and other furnaces whose lining is in direct contact with moving material or with flue gas carrying a heavy load of ash and particulates. It draws on a mixed body of Chinese and foreign documents, among them GB/T 902.2, GB/T 902.3, GB/T 983, GB/T 2091, GB/T 3003, GB/T 4209, GB/T 5117, GB/T 16400, HG/T 20525, HG/T 20544, HG 20581, HG/T 20683, HG/T 20684, ISO 13918, API STD.560-2007, ASTM C201-1993 and ASTM C356. It replaces HG/T 20642-1998 and,

HG/T 20642-2011 falls under ICS 71.120, in the field of chemical technology.

This catalogue holds 1,628 other HG/T standards in that field.

In this catalogue, HG/T standards carry edition years from 1975 to 2026.

3 Normative references

GB/T 902.2

GB/T 902.3

GB/T 983

GB/T 2091

GB/T 3003

GB/T 4209

GB/T 5117

GB/T 16400

HG/T 20525

HG/T 20544

HG 20581

HG/T 20683

HG/T 20684

ISO 13918

4 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 28 pages

5 Related standards

Other editions:

HG/T 20642-1998 (earlier edition)

Standards on related subjects:

HG/T 4752-2014 — Vinyl ester resin concrete electrolytic cell made by monolithic casting

HG/T 20584-2011 — Technical requirements for fabrication of steel chemical vessels

HG/T 3914-2006 — Steam tube rotary drum dryers

HG/T 20524-2024 — Code for design of chemical dosing units for recirculating cooling water treatment in chemical enterprises

HG/T 20641-2018 — Technical specification for lining construction of lime kilns

HG/T 20643-2012 — Specification for design of equipment foundations in chemical industry

6 Classification and status

International classification (ICS): 71.120

Chinese Standard Classification (CCS): G 93

Prefix HG/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 28 pages — is available in the English PDF.

Referenced standards

Similar standards

Editions of HG/T 20642

EditionTitleRevisionStatus
HG/T 20642-2011Specification for design of refractory ceramic fibre linings for chemical industrial furnacescurrent editionCurrent
HG/T 20642-1998Specification for design of refractory ceramic fibre linings for chemical industrial furnacesprevious editionSuperseded

This page sells the current edition, HG/T 20642-2011. Earlier editions are listed for reference only.

How to Download HG/T 20642-2011

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
28 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

HG/T 20642-2011

$495.00