HG/T 21536-2011Unified specification for content and depth of construction drawing design of industrial furnaces in chemical plants (English PDF)
化工工厂工业炉设计施工图内容深度统一规定
This is a limited preview
Buy now to download the full PDF (74 pages)
Need quotation for your management?
Get a formal quotation for HG/T 21536-2011 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
May 18, 2011
Implementation date
June 1, 2011
Scope
HG/T 21536-2011 is the English-translated version of 化工工厂工业炉设计施工图内容深度统一规定.
HG/T 21536-2011 is the Chinese chemical industry standard that unifies the content and the level of detail of working drawings for industrial furnaces in chemical plants.
It governs the preparation of the construction drawings and of the accompanying technical documents produced at the design stage. Its scope takes in new plants as well as renovation and expansion projects.
Drawing practice follows a large body of national drafting and representation standards, among them GB/T 131, GB/T 985.1, GB/T 1182, GB/T 4457.4, GB/T 14689, GB/T 17450 and GB/T 50001, together with HG/T 20685 and JB/T 8555.
It replaces HG/T 21536-1992. Issued on 18 May 2011, it has applied since 1 June 2011.
Found what you need?
Document preview — HG/T 21536-2011
National Standard of the People's Republic of China
- ICS
- 71.120
- Replacing
- HG/T 21536-1992
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Molecular formula and relative molecular mass
- 5 Classification
- 6 Test methods
- 6.1 General provisions
- 6.2 Appearance inspection
- 7 Inspection rules
- 9 Marking and accompanying documents
1 Foreword
HG/T 21536-2011 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 18 May 2011 and has been in force since 1 June 2011.
It replaces the earlier edition HG/T 21536-1992.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This standard is the Chinese chemical industry standard that unifies the content and the level of detail of working drawings for industrial furnaces in chemical plants. It governs the preparation of the construction drawings and of the accompanying technical documents produced at the design stage. Its scope takes in new plants as well as renovation and expansion projects. Drawing practice follows a large body of national drafting and representation standards, among them GB/T 131, GB/T 985.1, GB/T 1182, GB/T 4457.4, GB/T 14689, GB/T 17450 and GB/T 50001, together with HG/T 20685 and JB/T 8555. It replaces HG/T 21536-1992.
HG/T 21536-2011 falls under ICS 71.120, in the field of chemical technology.
This catalogue holds 1,628 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB/T 131
GB/T 324
GB/T 985.1
GB/T 985.2
GB/T 1182
GB/T 4457.4
GB/T 4457.5
GB/T 4458.1
GB/T 4458.2
GB/T 4458.4
GB/T 4458.5
GB/T 4458.6
GB/T 4459.1
GB/T 12212
GB/T 14665
GB/T 14689
GB/T 14690
GB/T 14691
GB/T 16675.1
GB/T 16675.2
GB/T 17450
GB/T 17451
GB/T 17452
GB/T 50001
HG/T 20685
JB/T 8555
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 74 pages
5 Related standards
Other editions:
HG/T 21536-1992 (earlier edition)
Standards on related subjects:
HG/T 4752-2014 — Vinyl ester resin concrete electrolytic cell made by monolithic casting
HG/T 20584-2011 — Technical requirements for fabrication of steel chemical vessels
HG/T 3914-2006 — Steam tube rotary drum dryers
HG/T 20524-2024 — Code for design of chemical dosing units for recirculating cooling water treatment in chemical enterprises
HG/T 20581-2020 — Code for material selection of steel chemical vessels
HG/T 20580-2020 — Code for basic design of steel chemical vessels
6 Classification and status
International classification (ICS): 71.120
Chinese Standard Classification (CCS): G 93
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 74 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 131Geometrical Product Specifications (GPS) -- Indication of Surface texture in technical Product documentation
- GB/T 324Weld symbolic representation on drawings
- GB/T 985.1Recommended joint preparation for gas welding, manual metal arc welding, gas-shield arc welding and beam welding
- GB/T 985.2Recommended joint preparation for submerged arc welding
- GB/T 1182Geometrical product specifications (GPS) -- Geometrical tolerancing -- Tolerances of form, orientation, location and run-out
- GB/T 4457.4Mechanical drawings -- General principles of presentation -- Lines
Similar standards
Editions of HG/T 21536
| Edition | Title | Revision | Status |
|---|---|---|---|
| HG/T 21536-2011 | Unified specification for content and depth of construction drawing design of industrial furnaces in chemical plants | current edition | Current |
| HG/T 21536-1992 | Unified specification for content and depth of construction drawing design of industrial furnaces in chemical plants | previous edition | Superseded |
This page sells the current edition, HG/T 21536-2011. Earlier editions are listed for reference only.
How to Download HG/T 21536-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 1182-1996 — Geometrical tolerancing--Generalities, definitions, indications on drawings
GB/T 1182-2008 — Geometrical Product Specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out
GB/T 1182-2018 — Geometrical product specifications (GPS) -- Geometrical tolerancing -- Tolerances of form, orientation, location and run-out
HG/T 21536-2011
$1,230.00