Valid

HG/T 20588-2012Unified specification for content and depth of architectural and structural construction drawings in chemical industry (English PDF)

化工建筑、结构施工图内容、深度统一规定

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for HG/T 20588-2012 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

May 24, 2012

Implementation date

November 1, 2012

Scope

HG/T 20588-2012 is the English-translated version of 化工建筑、结构施工图内容、深度统一规定.

HG/T 20588-2012 is the Chinese chemical industry standard covering unified specification for content and depth of architectural and structural construction drawings in chemical industry.

It was issued on 24 May 2012 and has been in force since 1 November 2012, replacing HG/T 20588-1996. The document is under the responsibility of the Ministry of Industry and Information Technology.

This page is published from the official record of the 2012 edition. The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.

Found what you need?

Document preview — HG/T 20588-2012

National Standard of the People's Republic of China

Replacing
HG/T 20588-1996

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 1.1 Terms
  • 2 Normative References
  • 2.1 Layout principle
  • 2.2 General requirements
  • 2.3 Example of layout
  • 3 Clear distance, clearance and relevant elevations
  • 4 Operating platform and ladder
  • 5 Other requirements of layout design
  • 6 Layout of horizontal vessels
  • 7 Layout of vertical vessels and reactors
  • 8 Layout of heating furnace
  • 9 Layout of centrifugal compressor

1 Foreword

HG/T 20588-2012 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 24 May 2012 and has been in force since 1 November 2012.

It replaces the earlier edition HG/T 20588-1996.

The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

HG/T 20588-2012 carries no ICS number and no Chinese Standard Classification code.

This catalogue holds 6,854 other HG/T standards.

Of the 2,593 HG/T standards that do carry an ICS number, 1,629 (63%) fall under ICS 71, in the field of chemical technology.

3 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

4 Related standards

Other editions:

HG/T 20588-1996 (earlier edition)

Standards on related subjects:

GB/T 50046-2018 — Standard for anticorrosion design of industrial constructions

GB 50073-2013 — Code for design of clean room

GB 50089-2007 — Safety code for design of engineering of civil explosives materials

HG/T 20681-2018 — Technical code for civil load design conditions of boiler houses and turbine houses

HG/T 21511-2011 — Regulations on content and depth of detail design documents for rubber factories

HG/T 20708-2011 — Technical specification for reinforced cushions of foundations for chemical buildings (structures)

5 Classification and status

Prefix HG/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

Editions of HG/T 20588

EditionTitleRevisionStatus
HG/T 20588-2012Unified specification for content and depth of architectural and structural construction drawings in chemical industrycurrent editionCurrent
HG/T 20588-1996Unified specification for content and depth of architectural and structural construction drawings in chemical industryprevious editionSuperseded

This page sells the current edition, HG/T 20588-2012. Earlier editions are listed for reference only.

How to Download HG/T 20588-2012

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

HG/T 20588-2012

$1,040.00