Valid

HG/T 20684-2012Specification for selection of metallic materials in design of chemical industrial furnaces (English PDF)

化学工业炉金属材料设计选用规定

Preview PDF

This is a limited preview

Buy now to download the full PDF (42 pages)

Need quotation for your management?

Get a formal quotation for HG/T 20684-2012 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

May 24, 2012

Implementation date

November 1, 2012

Scope

HG/T 20684-2012 is the English-translated version of 化学工业炉金属材料设计选用规定.

HG/T 20684-2012 is the Chinese chemical industry specification that guides the selection of metallic materials when chemical industrial furnaces are designed. It addresses the metals in common use in this class of equipment and gives designers a shared basis for choosing between them for general chemical furnace service.

The document works alongside a broad set of national material and pressure vessel standards, including GB 150, GB/T 228, GB/T 699, GB/T 700, GB 713, GB/T 1220, GB/T 1591, GB/T 3077 and GB 5310.

Classified under CCS G93 and ICS 23.020.30, it is a recommended standard of the Ministry of Industry and Information Technology. It supersedes HG/T 20684-1990. Issued on 24 May 2012, it has applied since 1 November 2012.

Found what you need?

Document preview — HG/T 20684-2012

National Standard of the People's Republic of China

ICS
23.020.30
Replacing
HG/T 20684-1990

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative References
  • 3 Terms and definitions
  • 4 Molecular formula and relative molecular mass
  • 5 Classification
  • 6 Test methods
  • 6.1 General provisions
  • 6.2 Appearance inspection
  • 7 Inspection Rules
  • 9 Marking and accompanying documents

1 Foreword

HG/T 20684-2012 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 24 May 2012 and has been in force since 1 November 2012.

It replaces the earlier edition HG/T 20684-1990.

The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

This standard is the Chinese chemical industry specification that guides the selection of metallic materials when chemical industrial furnaces are designed. It addresses the metals in common use in this class of equipment and gives designers a shared basis for choosing between them for general chemical furnace service. The document works alongside a broad set of national material and pressure vessel standards, including GB 150, GB/T 228, GB/T 699, GB/T 700, GB 713, GB/T 1220, GB/T 1591, GB/T 3077 and GB 5310. Classified under CCS G93 and ICS 23.020.30, it is a recommended standard of the Ministry of Industry and Information Technology. It supersedes HG/T 20684-1990.

HG/T 20684-2012 falls under ICS 23.020.30, in the field of fluid systems and general-purpose components.

This catalogue holds 16 other HG/T standards in that field.

In this catalogue, HG/T standards carry edition years from 1975 to 2026.

3 Normative references

GB 150

GB/T 228

GB/T 699

GB/T 700

GB/T 710

GB/T 711

GB 713

GB/T 912

GB/T 983

GB/T 1220

GB/T 1221

GB/T 1348

GB/T 1591

GB/T 3077

GB/T 3087

GB/T 3274

GB/T 3280

GB/T 3323

GB/T 4237

GB/T 4238

GB/T 5117

GB/T 5118

GB/T 5293

GB 5310

GB/T 5

4 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 42 pages

5 Related standards

Other editions:

HG/T 20684-1990 (earlier edition)

Standards on related subjects:

HG/T 4752-2014 — Vinyl ester resin concrete electrolytic cell made by monolithic casting

HG/T 20584-2011 — Technical requirements for fabrication of steel chemical vessels

HG/T 3914-2006 — Steam tube rotary drum dryers

HG/T 20524-2024 — Code for design of chemical dosing units for recirculating cooling water treatment in chemical enterprises

HG/T 20581-2020 — Code for material selection of steel chemical vessels

HG/T 20580-2020 — Code for basic design of steel chemical vessels

6 Classification and status

International classification (ICS): 23.020.30

Chinese Standard Classification (CCS): G 93

Prefix HG/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 42 pages — is available in the English PDF.

Referenced standards

Normative references

GB/T 5

Similar standards

Editions of HG/T 20684

EditionTitleRevisionStatus
HG/T 20684-2012Specification for selection of metallic materials in design of chemical industrial furnacescurrent editionCurrent
HG/T 20684-1990Specification for selection of metallic materials in design of chemical industrial furnacesprevious editionSuperseded

This page sells the current edition, HG/T 20684-2012. Earlier editions are listed for reference only.

How to Download HG/T 20684-2012

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
42 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

HG/T 20684-2012

$660.00