Valid

HG 20706-2013Code for design of waste incineration facilities in chemical construction projects (English PDF)

化工建设项目废物焚烧处置工程设计规范

Preview PDF

This is a limited preview

Buy now to download the full PDF (45 pages)

Need quotation for your management?

Get a formal quotation for HG 20706-2013 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Mandatory

Issue date

October 17, 2013

Implementation date

March 1, 2014

Scope

HG 20706-2013 is the English-translated version of 化工建设项目废物焚烧处置工程设计规范.

This standard sets out the technical requirements for the engineering of incineration facilities that dispose of waste from chemical industry projects, including hazardous chemical waste.

It covers the design of the incineration works themselves and the related provisions that a chemical waste incineration facility has to satisfy. The standard applies to newly built chemical waste incineration facilities as well as to expansion and renovation work on existing ones.

Because it addresses hazardous waste, the standard is read together with the national rules on the identification of hazardous waste and on emissions, which it cites as normative references.

Found what you need?

Document preview — HG 20706-2013

National Standard of the People's Republic of China

ICS
71.120

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 General Provisions
  • 1.1 Pursuant Laws and Regulations
  • 1.2 Scope
  • 1.3 Design and Manufacturing Organization
  • 1.4 Definitions
  • 1.5 Load
  • 1.6 Thickness
  • 1.7 Permissible Stress
  • 1.8 Pressure Test and Compactness Test
  • 2 Terms
  • 2.1 General Requirements of Materials
  • 2.2 Grey Cast Iron
  • 2.3 Spheroidal Graphite Cast Iron
  • 2.4 Malleable Cast Iron
  • 2.5 Corrosion Resistant High Silicon Cast Iron
  • 2.6 Heat Resistant Cast Iron
  • 2.7 Carbon Cast Steel and Acid-Resistant Stainless Cast Steel
  • 2.8 Heat-Resistant Cast Steel
  • 3 Basic requirements
  • 3.1 General Principles
  • 3.2 Calculation of Tower Vessel
  • 3.3 Calculation of Shells under External Pressure
  • 4 Degreasing of equipment
  • 4.1 General Principle and Precautions for Structural Design
  • 4.2 Characteristics of Structural Design of Different Cast Materials
  • 4.3 Design of Cast Node
  • 4.4 Structure Design for Casting Vessel Parts
  • 4.5 Structural Design of Tower Vessel
  • 4.6 Prevention against accidental injuries such as mechanical injury and falling
  • 5 Degreasing of pipeline and pipeline components
  • 5.1 Static Equipment and Pipeline System
  • 5.2 Electrical System
  • 5.3 Instruments and Control System
  • 5.4 Rotating Equipment/Machinery Run-in
  • 5.5 Furnace Drying
  • 5.6 Repair of Casting Defect
  • 5.7 General Requirements for Inspection
  • 5.9 Destructive Test of Hydraulic Pressure for Cast Iron Vessel
  • 6 Degreasing of instruments and instrument components
  • 6.1 General Requirements for Cold Commissioning
  • 6.2 Simulation Running of Unit or System
  • 6.3 Boiling out of Steam Generator
  • 6.4 Passivation of Equipment and Pipeline System
  • 6.5 Filling of Catalyst, Molecular Sieve, Resin and Desiccant
  • 6.6 Tightness Test of Process System
  • 7 Inspection
  • 7.1 Safety and hygiene management institutions and personnel quota
  • 7.2 Safety and hygiene monitoring institutions
  • 7.3 Gas protection station
  • 7.4 Fire station
  • 7.5 Establishment of occupational disease prevention and control institutions
  • 8 Safety technology
  • 9 Division of Responsibilities

1 Foreword

HG 20706-2013 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 17 October 2013 and has been in force since 1 March 2014.

The HG prefix, without a suffix, marks a mandatory standard: within its scope, compliance is required.

The document runs to 45 pages in English translation.

2 Scope Preview

This standard sets out the technical requirements for the engineering of incineration facilities that dispose of waste from chemical industry projects, including hazardous chemical waste. It covers the design of the incineration works themselves and the related provisions that a chemical waste incineration facility has to satisfy. The standard applies to newly built chemical waste incineration facilities as well as to expansion and renovation work on existing ones. Because it addresses hazardous waste, the standard is read together with the national rules on the identification of hazardous waste and on emissions, which it cites as normative references.

HG 20706-2013 falls under ICS 71.120, in the field of chemical technology.

This catalogue holds 33 other HG standards in that field.

In this catalogue, HG standards carry edition years from 1975 to 2015.

3 Normative references

GB 5085. 1

GB 5085. 2

GB 5085. 3

GB 50483

HJ/T 176

GB 50489

GB 50016

HG 20695

GB 15562.2

GB 18597

HG/T 20682

HG/T 20683

HG/T 20684

JB/T 7603

GB 16297

GB 9078

GB 18184

GB 14554

GB 50058

GB 50014

GB 8978

GB 50140

GB 50019

4 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 45 pages

5 Related standards

Standards on related subjects:

HG/T 20513-2014 — Design code of instrument grounding

SH/T 3407-2013 — Spiral wound gaskets for steel pipe flanges in petrochemical industry

SH/T 3537-2009 — Technical specification for construction of vertical cylindrical low temperature storage tank

HG/T 20711-2019 — Code for design of heating, ventilation and air conditioning of chemical laboratories and testing rooms

HG/T 20710-2017 — Code for design of piled raft foundations with controllable stiffness

HG/T 20709-2017 — Code for design of composite pile foundations

6 Classification and status

International classification (ICS): 71.120

Prefix HG: mandatory standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 45 pages — is available in the English PDF.

Referenced standards

Normative references

GB 5085. 1 · GB 5085. 2 · GB 5085. 3 · HG 20695 · GB 18184

Similar standards

How to Download HG 20706-2013

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
45 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

HG 20706-2013

$710.00