GB/T 29152-2025Flue gas cleaning systems for municipal solid waste incineration (English PDF)

垃圾焚烧尾气处理设备

Open the GB/T 29152-2025 preview as PDF

Preview — first pages of GB/T 29152-2025 (full document: 8 pages)

This is a limited preview

Buy now to download the full PDF (8 pages)

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

October 31, 2025

Implementation date

May 1, 2026

Scope

GB/T 29152-2025 is the English-translated version of 垃圾焚烧尾气处理设备.

GB/T 29152-2025 is the Chinese national standard covering cleaning the gas from a waste incinerator - the acid gas scrubbing, the activated carbon for dioxins and mercury, the bag filter, and the SNCR or SCR for nitrogen oxides, with the removal efficiencies and the continuous monitoring. Issued on 31 October 2025, it has been in force since 1 May 2026, replacing GB/T 29152-2012.

Document preview — GB/T 29152-2025

National Standard of the People's Republic of China

ICS: 13.040.30
Classification: J 88
Replacing: GB/T 29152-2012

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

1 Scope
2 Normative references
3 Terms and Definitions
4.2 System Composition
5 Technical Requirements
5.1 Basic Requirements
5.2 Performance Requirements 5
5.3 Process System Requirements 5
5.4 Electrical Control Requirements 9
5.5 Safety, Environmental Protection, and Occupational Health Requirements 10
5.6 Fire safety requirements 10
6 Test Methods 10
6.1 Flow field simulation verification 10
6.2 Welding quality inspection 10
6.3 Insulation and paint inspection 10
6.4 Electrical equipment inspection 10
6.5 Inspection of lightning protection and grounding measures 10
6.6 Performance Test 10
7 Inspection Rule 11
7.1 Inspection Classification 11
7.2 Factory Inspection 11
7.3 Installation Inspection 11
7.4 Performance Testing 11
8 Signs and Documents 12
8.1 Fixed Product Marking 12
8.2 Packaging and Storage Markings 13
8.3 Document 13
9 Packaging, transportation and storage 13
9.1 Packaging 13
9.2 Transportation 13
9.3 Storage
13 Appendix A (Informative) Typical Exhaust Gas Treatment Equipment Process Flow
14 Table

1 Scope

This document specifies the equipment composition and technical requirements for waste incineration flue gas treatment equipment, describes the corresponding test methods, and stipulates the inspection procedures. Rules, markings and documents, as well as packaging, transportation and storage. This document applies to the manufacture of flue gas treatment equipment for municipal solid waste incinerators.

2 Normative references

The contents of the following documents, through normative references within the text, constitute essential provisions of this document. Dated citations are not included. For references to documents, only the version corresponding to that date applies to this document; for undated references, the latest version (including all amendments) applies. This document.

GB/T 150 (All Parts) Pressure Vessels

GB/T 191 Pictorial Symbols for Packaging and Storage

GB/T 209 Industrial Sodium Hydroxide

GB/T 210 Industrial Sodium Carbonate

GB/T 699 High-quality carbon structural steel

GB/T 1606-2025 Industrial Sodium Bicarbonate GB/T 2440 Urea

GB/T 3077 Alloy Structural Steel

GB/T 3274 Hot-rolled steel plates and strips of carbon structural steel and low-alloy structural steel

GB 4053 (all parts) Safety requirements for fixed steel ladders and platforms

GB/T 6388 Transport Packaging Receipt and Delivery Marks

GB/T 6719 Technical Requirements for Bag Filters

GB/T 7701.1 Coal-based granular activated carbon for gas phase application GB/T 13306 Nameplates

GB/T 13384 General Technical Requirements for Packaging of Mechanical and Electrical Products

14 Table

1.Ammonia slip and SO2/SO3 conversion rate requirements for denitrification systems. Table

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 8 pages — is available in the English PDF.

Referenced standards

Normative references

GB/T 150 · GB 4053 · GB/T 6388 · GB 18485 · GB 50057

Editions of GB/T 29152

Edition	Title	Revision	Status
GB/T 29152-2025	Flue gas cleaning system for municipal solid waste incineration	current edition	Current
GB/T 29152-2012	Flue gas cleaning system for municipal solid waste incineration	previous edition	In force

This page sells the current edition, GB/T 29152-2025. Earlier editions are listed for reference only.

How to Buy GB/T 29152-2025

1Add to cart. Click the "Buy GB/T 29152-2025" button on this page. You can add more standards before checkout.
2Checkout. Enter your email and billing details. Payment is processed securely by Stripe (cards, Apple Pay, Google Pay supported).
3Instant delivery (0–9 sec). Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4Invoice included. A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.