HG/T 20589-2011Specification for strength calculation of pressure parts of chemical industrial furnaces (English PDF)
化学工业炉受压元件强度计算规定
This is a limited preview
Buy now to download the full PDF (48 pages)
Need quotation for your management?
Get a formal quotation for HG/T 20589-2011 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
May 18, 2011
Implementation date
June 1, 2011
Scope
HG/T 20589-2011 is the English-translated version of 化学工业炉受压元件强度计算规定.
HG/T 20589-2011 is a recommended Chinese chemical industry standard giving the strength calculation rules for the pressure parts of chemical industrial furnaces.
It applies to new furnace tubes and to the associated fittings such as headers, tees and shaped tubes, and it treats the design of fired heater tubes in corrosive and non-corrosive service alike.
It does not cover the strength calculation of refractory-lined pressure shells, heads and components such as gasifiers and secondary reformers, nor the design of piping outside the furnace.
It is a modified adoption of ISO 13704-2007 and cites GB 150, GB 9948, GB/T 9222-2008, ASTM A234, ASTM A403, ASME B366, ASME B16.9, ASME B31.3-2006, API RP 579-2007, API PUBL 581-2008 and API RP 941-2008.
It supersedes HG/T 20589-1996. Issued on 18 May 2011, it has applied since 1 June 2011.
Found what you need?
Document preview — HG/T 20589-2011
National Standard of the People's Republic of China
- ICS
- 71.120
- Replacing
- HG/T 20589-1996
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Molecular formula and relative molecular mass
- 5 Classification
- 6 Test methods
- 6.1 General provisions
- 6.2 Appearance inspection
- 7 Inspection rules
- 9 Marking and accompanying documents
1 Foreword
HG/T 20589-2011 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 18 May 2011 and has been in force since 1 June 2011.
It replaces the earlier edition HG/T 20589-1996.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This standard is a recommended Chinese chemical industry standard giving the strength calculation rules for the pressure parts of chemical industrial furnaces. It applies to new furnace tubes and to the associated fittings such as headers, tees and shaped tubes, and it treats the design of fired heater tubes in corrosive and non-corrosive service alike. It does not cover the strength calculation of refractory-lined pressure shells, heads and components such as gasifiers and secondary reformers, nor the design of piping outside the furnace. It is a modified adoption of ISO 13704-2007 and cites GB 150, GB 9948, GB/T 9222-2008, ASTM A234, ASTM A403, ASME B366, ASME B16.9, ASME B31.3-2006, API RP 579-2007, API PUBL 581-2008 and API RP 941-2008. It supersedes HG/T 20589-1996.
HG/T 20589-2011 falls under ICS 71.120, in the field of chemical technology.
This catalogue holds 1,628 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB 150
GB 9948
GB/T 9222-2008 — Strength calculation of pressure parts for water tube boilers
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 48 pages
5 Related standards
Other editions:
HG/T 20589-1996 (earlier edition)
Standards on related subjects:
HG/T 4752-2014 — Vinyl ester resin concrete electrolytic cell made by monolithic casting
HG/T 20584-2011 — Technical requirements for fabrication of steel chemical vessels
HG/T 3914-2006 — Steam tube rotary drum dryers
HG/T 20582-2020 — Code for strength calculation of steel chemical vessels
HG/T 20581-2020 — Code for material selection of steel chemical vessels
HG/T 20580-2020 — Code for basic design of steel chemical vessels
6 Classification and status
International classification (ICS): 71.120
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 48 pages — is available in the English PDF.
Referenced standards
Similar standards
Editions of HG/T 20589
| Edition | Title | Revision | Status |
|---|---|---|---|
| HG/T 20589-2011 | Specification for strength calculation of pressure parts of chemical industrial furnaces | current edition | Current |
| HG/T 20589-1996 | Specification for strength calculation of pressure parts of chemical industrial furnaces | previous edition | Superseded |
This page sells the current edition, HG/T 20589-2011. Earlier editions are listed for reference only.
How to Download HG/T 20589-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 150.1-2011 — Pressure vessels—Part 1:General requirements
GB 150-1989 — Steel pressure vessell
GB 150-1998 — [Replaced by GB 150.1-2011~GB150.4-2011] Steel pressure vessels [including MODIFICATION 1]
HG/T 20589-2011
$770.00