HG/T 20525-2006Design specification for heat transfer calculation of tubular furnaces in the chemical industry (English PDF)
化学工业管式炉传热计算设计规定
This is a limited preview
Buy now to download the full PDF (115 pages)
Need quotation for your management?
Get a formal quotation for HG/T 20525-2006 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
October 14, 2006
Implementation date
April 1, 2007
Scope
HG/T 20525-2006 is the English-translated version of 化学工业管式炉传热计算设计规定.
HG/T 20525-2006 is the Chinese chemical industry design code for the heat transfer calculation of tubular furnaces.
It is written for the fired furnaces of chemical plants, whatever their fuel, and takes in gas, liquid and solid fuel tube furnaces, cracking furnaces, hydrocarbon reforming furnaces and the other industrial furnaces in common use in the sector.
Its subject is the heat transfer calculation carried out when such a furnace is designed, rather than the mechanical construction of the equipment. The code belongs to the chemical engineering design group of the catalogue (Chinese classification G93) and is used with HG/T 20682 and HG/T 20685.
It supersedes HG/T 20525-1992. Issued on 14 October 2006, it has applied since 1 April 2007.
Found what you need?
Document preview — HG/T 20525-2006
National Standard of the People's Republic of China
- ICS
- 71.120
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Molecular formula and relative molecular mass
- 5 Classification
- 6 Test methods
- 6.1 General provisions
- 6.2 Appearance inspection
- 7 Inspection rules
- 9 Marking and accompanying documents
1 Foreword
HG/T 20525-2006 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 14 October 2006 and has been in force since 1 April 2007.
It replaces the earlier edition HG/T 20525-1992.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This standard is the Chinese chemical industry design code for the heat transfer calculation of tubular furnaces. It is written for the fired furnaces of chemical plants, whatever their fuel, and takes in gas, liquid and solid fuel tube furnaces, cracking furnaces, hydrocarbon reforming furnaces and the other industrial furnaces in common use in the sector. Its subject is the heat transfer calculation carried out when such a furnace is designed, rather than the mechanical construction of the equipment. The code belongs to the chemical engineering design group of the catalogue (Chinese classification G93) and is used with HG/T 20682 and HG/T 20685. It supersedes HG/T 20525-1992.
HG/T 20525-2006 falls under ICS 71.120, in the field of chemical technology.
This catalogue holds 1,628 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
HG/T 20682
HG/T 20685
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 115 pages
5 Related standards
Other editions:
HG/T 20525-1992 (earlier edition)
Standards on related subjects:
HG/T 4752-2014 — Vinyl ester resin concrete electrolytic cell made by monolithic casting
HG/T 20584-2011 — Technical requirements for fabrication of steel chemical vessels
HG/T 2377-2009 — Virteous and porlelain enamels. Determination of resistance to boiling water and vapouy
HG/T 20524-2024 — Code for design of chemical dosing units for recirculating cooling water treatment in chemical enterprises
HG/T 20581-2020 — Code for material selection of steel chemical vessels
HG/T 20580-2020 — Code for basic design of steel chemical vessels
6 Classification and status
International classification (ICS): 71.120
Chinese Standard Classification (CCS): G 93
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 115 pages — is available in the English PDF.
Referenced standards
Normative references
Similar standards
How to Download HG/T 20525-2006
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
HG/T 20682-1990 — Chemical industrial furnace fuel combustion design and calculation requirements
HG/T 20682-2005 — Design calculation specification for fuel combustion of chemical industrial furnace
HG/T 20685-1990 — Chemical Industrial Furnace uniform regulations Terminology
Secure payment via Stripe
Payments accepted
HG/T 20525-2006
$1,985.00