GB/T 32956-2016Methods of determination and calculation of heat balance in grate-kiln process forpellet firing system of iron and steel industry (English PDF)
钢铁行业链箅机-回转窑焙烧球团系统热平衡测试与计算方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 32956-2016 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
August 29, 2016
Implementation date
July 1, 2017
Scope
GB/T 32956-2016 is the English-translated version of 钢铁行业链箅机-回转窑焙烧球团系统热平衡测试与计算方法.
GB/T 32956-2016 is the Chinese standard "Methods of determination and calculation of heat balance in grate-kiln process forpellet firing system of iron and steel industry".
Its scope clause reads: This standard specifies the steel industry chain grate - rotary kiln roasting pellet system thermal balance test and calculation of the benchmark, equipment and the main technology Parameters, test preparation, test procedures, test sites and methods, material balance calculation, heat balance calculation.
This standard applies to the steel industry to solid fuel-based chain grate - rotary kiln roasting pellet system thermal balance test and calculation. Its clauses include normative reference documents; terms and definitions; thermal balance test and calculation basis.
Found what you need?
Document preview — GB/T 32956-2016
National Standard of the People's Republic of China
- ICS
- 77.140.75
- Classification
- H 04
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 normative reference documents
- 3 terms and definitions
- 4 Thermal balance test and calculation basis
1 Scope
This standard specifies the steel industry chain grate - rotary kiln roasting pellet system thermal balance test and calculation of the benchmark, equipment and the main technology
Parameters, test preparation, test procedures, test sites and methods, material balance calculation, heat balance calculation.
This standard applies to the steel industry to solid fuel-based chain grate - rotary kiln roasting pellet system thermal balance test and calculation.
2 normative reference documents
The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article
Pieces. For undated references, the latest edition (including all modifications) applies to this document.
GB/T 476 Elemental Analysis Method for Coal
Code for design of GB 50491 iron ore pellets
3 terms and definitions
GB 50491 Definitions of terms and definitions apply to this document.
4 Thermal balance test and calculation basis
4.1 Reference temperature and humidity
The ambient temperature and relative humidity at 1 m from the equipment in the workshop where the rotary kiln is located.
4.2 fuel calorific value
Using the received low (bit) calorific value.
4.3 Thermal balance test range
According to the need to do the whole system of thermal balance testing and calculation (ie, including chain grate, rotary kiln and ring cooling machine), can also be chain grate,
Test and Calculation of Heat Balance of Rotary Kiln and Circulating Cooler.
4.4 Thermal balance test time
In the material varieties and specifications unchanged, the system conditions are stable under the continuous test. The thermal balance test should be made in the chain grate - rotary kiln system
Continued to run within 8h to complete the number of tests per day can not be less than 2 times, continuous test 3d. Material volume, temperature, pressure, flow and other parameters of the test
Try not less than 4 times per class, and then take the average.
4.5 Heat balance calculation unit
The amount of heat consumed per hour is calculated as kJ/h.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 32956-2016
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 32956-2016
$255.00