HG/T 4271-2011Electrically heated rotary cylinder calciners (English PDF)
电热式回转圆筒焙烧炉
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 4271-2011 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 20, 2011
Implementation date
July 1, 2012
Scope
HG/T 4271-2011 is the English-translated version of 电热式回转圆筒焙烧炉.
HG/T 4271-2011 is the recommended chemical industry standard for electrically heated rotary cylinder calciners. It lays down the structural types, the basic parameters and the way models are designated, the requirements, the inspection methods and the inspection rules, and the product marking, packaging, transport and storage.
It applies to rotary calciners with a furnace diameter of 100 mm to 2200 mm working between 400 °C and 950 °C in the chemical, petrochemical and metallurgical industries, and machines outside that size range may be built by reference to it.
It draws on a wide reference list that includes GB 150, GB 3836.1-2010, GB 5226.1-2008, GB/T 4237-2007, GB/T 10095.1-2008, GB/T 15706.2-2007, HG 20583-1998, JB/T 4730.2-2005 and JB/T 5000.6-2007. Issued on 20 December 2011, it has applied since 1 July 2012.
Found what you need?
Document preview — HG/T 4271-2011
National Standard of the People's Republic of China
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 1.1 Terms
- 2 Normative References
- 2.1 Layout principle
- 2.2 General requirements
- 2.3 Example of layout
- 3 Clear distance, clearance and relevant elevations
- 4 Operating platform and ladder
- 5 Other requirements of layout design
- 6 Layout of horizontal vessels
- 7 Layout of vertical vessels and reactors
- 8 Layout of heating furnace
- 9 Layout of centrifugal compressor
1 Foreword
HG/T 4271-2011 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 20 December 2011 and has been in force since 1 July 2012.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is the recommended chemical industry standard for electrically heated rotary cylinder calciners. It lays down the structural types, the basic parameters and the way models are designated, the requirements, the inspection methods and the inspection rules, and the product marking, packaging, transport and storage. It applies to rotary calciners with a furnace diameter of 100 mm to 2200 mm working between 400 °C and 950 °C in the chemical, petrochemical and metallurgical industries, and machines outside that size range may be built by reference to it. It draws on a wide reference list that includes GB 150, GB 3836.1-2010, GB 5226.1-2008, GB/T 4237-2007, GB/T 10095.1-2008, GB/T 15706.2-2007, HG 20583-1998, JB/T 4730.2-2005 and JB/T 5000.6-2007.
HG/T 4271-2011 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 6,683 other HG/T standards.
Of the 2,593 HG/T standards that do carry an ICS number, 1,629 (63%) fall under ICS 71, in the field of chemical technology.
3 Normative references
GB 150
GB/T 191- 2008 — Packaging - Pictorial marking for handling of goods
GB/T 1184-1996 — Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
GB 1234
GB/T 1804 2000 — General tolerances - Tolerances for linear and angular dimensions without individual tolerance indications
GB/T 2900.23-2008 — Electrotechnical terminology -- Industrial electro-heat
GB/T 3003- 2006 — Refractory - Ceramic fibre and the products
GB/T 3077
GB/T 3768
GB 3836.1-2010 — [Replaced by GB/T 3836.1-2021] Explosive atmospheres - Part 1: Equipment - General requirements
GB/T 4208-2008 — Degrees of protection provided by enclosure (IP code)
GB/T 4237-2007 — Hot rolled stainless steel plate, sheet and strip
GB/T 4879
GB/T 5048
GB 5226.1-2008 — Electrical safety of machinery - Electrical equipment of machines - Part 1: General requirements
GB 5959.4-2008 — Safety in electro-heat installations -- Part 4: Particular requirements for safety resistance heating installations
GB/T 6388
GB/T 6404.1-2005 — Acceptance code for gear units -- Part 1: Test code for airborne sound
GB/T 9969-2008 — General principles for preparation of instructions for use of industrial products
GB/T 10066.1-2004 — Test methods for electro-heat installations - Part 1: General
GB/T 10066.4-2004 — Test methods for electro-heat installations -- Part 4: Indirect resistances furnaces
GB/T 10067.1-2005 — Basic specifications for electro-heat installations - Part 1: General
GB/T 10067.4-2005 — Basic specifications for electroheat installations Part 4:Indirect resistance furnaces
GB/T 10095.1-2008 — Cylindrical gears - System of accuracy - Part 1: Definitions and allowable values of deviations relevant to corresponding flanks of gear teeth
GB/T 10095. 2-2008 — Cylindrical gears - System of accuracy - Part 2: Definitions and allowable values of deviations relevant to radial composite deviations and runout information
GB 13296-2007 — Seamless stainless steel tubes for boiler and heat exchanger
GB/T 13297
GB/T 13306
GB/T 13384
GB/T 15706.2-2007 — Safety of machinery -- Basic concepts, general principles for design -- Part 2: Technical principles
GB/T 17195
GB/T 18930
GB/T 19142-2008 — Packaging for export commodity general rule
GB/T 20878-2007 — Stainless and heat-resisting steels - Designation and chemical composition
GB/T 50211-2004
HG/T 2601
HG 20583-1998 — Specification for Structural Design of Steel Chemical Vessels
HG/T 20566
HG/T 20642
HG/T 20683
HG/T 20684
JB/T 3649.1-2005
JB/T 3649.2-2005
JB/T 3649.3-2005
JB/T 3649.4-2005
JB/T 4385.1-1999 — Open die forgings made on hammers - General technical specifications
JB/T 4385.2-1999 — Open die forgings on hammers - Complexity classification and conversion factors
JB/T 4730.2-2005 — Non-destructive testing of pressure equipment - Part 2: Radiographic testing
JB/T 4730.3-2005 — Non-destructive testing of pressure equipment - Part 3: Ultrasonic testing
JB/T 5000.6-2007 — General technical requirements for heavy machinery - Part 6: Steel castings
JB/T 5000.7-2007 — General technical requirements for heavy machinery - Part 7: Repair welding of steel castings
JB/T 5000.8-2007 — General technical requirements for heavy machinery - Part 8: Forgings
JB/T 5000.14-2007 — General technical requirements for heavy machinery - Part 14: Non-destructive testing of steel castings
JB/T 5000.15-2007 — General technical requirements for heavy machinery - Part 15: Non-destructive testing of steel forgings
JB/T 47003.1-2009
YB 475
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
HG/T 4752-2014 — Vinyl ester resin concrete electrolytic cell made by monolithic casting
HG/T 20584-2011 — Technical requirements for fabrication of steel chemical vessels
HG/T 3914-2006 — Steam tube rotary drum dryers
HG/T 6384-2025 — Polyvinyl alcohol slaking machinery
HG/T 6383-2025 — Polypropylene devolatilization tower
HG/T 4270-2011 — Vacuum deaerators for circulating water systems
6 Classification and status
Chinese Standard Classification (CCS): G 93
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB 150Pressure Vessels (Collection GB150.1~150.4-2011)
- GB/T 191- 2008Graphical symbols marking for handling and storage of packages
- GB/T 1184-1996Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
- GB 1234High resistance alloys for electrical heating
- GB/T 1804 2000General tolerances - Tolerances for linear and angular dimensions without individual tolerance indications
- GB/T 2900.23-2008Electrotechnical terminology -- Industrial electro-heat
GB/T 10095. 2-2008 · GB/T 50211-2004 · JB/T 47003.1-2009 · YB 475
Similar standards
How to Download HG/T 4271-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 1234-1985 — High resistance alloys for electrical heating
GB 13296-2007 — Seamless stainless steel tubes for boiler and heat exchanger
GB 150.1-2011 — Pressure vessels—Part 1:General requirements
HG/T 4271-2011
$165.00