Valid

GB/T 8593.2-2021Earth-moving machinery - Symbols for operator controls and other displays - Part 2: Symbols for specific machines, equipment and accessories (English PDF)

Preview PDF

This is a limited preview

Buy now to download the full PDF (98 pages)

Need quotation for your management?

Get a formal quotation for GB/T 8593.2-2021 in 30 minutes.

Issued by

State Administration for Market Regulation, China National Standardization Administration

Level / Type

National · Recommended

Issue date

December 31, 2021

Implementation date

July 1, 2022

Scope

GB/T 8593.2-2021 (Earth-moving machinery - Symbols for operator controls and other displays - Part 2: Symbols for specific machines, equipment and accessories) is available as an English-translated PDF.

GB/T 8593.2-2021 is the Chinese standard "Earth-moving machinery - Symbols for operator controls and other displays - Part 2: Symbols for specific machines, equipment and accessories".

Its scope clause reads: This document specifies special symbols for driver controls and other display devices of earth-moving machinery as defined in ISO 6165: Note 1: ISO 6405-1 is a general symbol applicable to a variety of earth-moving machinery: NOTE 2 Other internationally standardized symbols for potentially relevant earth-moving machinery can be obtained by reference to ISO 7000 and IEC 60417:. Its clauses include terms and definitions.

Found what you need?

Document preview — GB/T 8593.2-2021

National Standard of the People's Republic of China

Classification: P 97

Issued by: State Administration for Market Regulation, China National Standardization Administration

Preface
Introduction
1 Scope
2 Normative references
3 Terms and Definitions
4 General
5 colors
6 Development of new symbols
7 Digital display icon
8 GENERAL MACHINE AND EQUIPMENT SYMBOLS
9 Balance outrigger symbol
10 Outrigger symbol
11 Grab Bucket Symbol
12 Grasping forceps symbol
13 Bulldozer Symbol
14 Grader Symbol
15 Scraper Symbol
16 Excavator/Backhoe Symbol
17 Excavator/Shovel Symbol
18 loader symbol
19 Skid Steer Symbol
20 Dump Truck Symbol
21 Ground loosening working device (ripper or raker) symbol
22 winch symbol
23 Trencher Symbol
24 Horizontal Directional Drilling Rig Symbol
25 Counterweight Symbol

1 Scope

This document specifies special symbols for driver controls and other display devices of earth-moving machinery as defined in ISO 6165:

Note 1: ISO 6405-1 is a general symbol applicable to a variety of earth-moving machinery:

NOTE 2 Other internationally standardized symbols for potentially relevant earth-moving machinery can be obtained by reference to ISO 7000 and IEC 60417:

2 Normative references

The contents of the following documents constitute essential provisions of this document through normative references in the text: Among them, dated citations documents, only the version corresponding to that date applies to this document; for undated references, the latest edition (including all amendments) applies to this document:

GB/T 8593:1-2021 Symbols for earth-moving machinery driver operating devices and other display devices Part 1: General symbols (ISO 6405-1:2017, IDT)

ISO 6165 Earth-moving machinery basic types identification, terms and definitions (Earth-movingmachinery-Basictypes-

Identificationandtermsanddefinitions)

Note: GB/T 8498-2017 Earth-moving machinery basic type identification, terms and definitions (ISO 6165:2012, IDT)

IEC 80416-1 Basic Rules for Graphical Symbols for Equipment Part 1: Generation of Graphical Symbols for Registration (Basicprinciplesfor graphicalsymbolsforuseoneequipment-Part 1:Creationofgraphicalsymbolsforregistration)

Note: GB/T 23371:1-2013 Basic Rules for Graphical Symbols for Electrical Equipment Part 1: Generation of Graphical Symbols for Registration (IEC 80416-1:2008,

IDT)

ISO 80416-2 Rules for the representation of equipment with graphic symbols - Part 2: Form and use of arrows (Basicprinciplesfor graphicalsymbolsforuseoneequipment-Part 2:Formanduseofarrows)

Note: GB/T 16902:2-2008 Rules for the representation of equipment with graphic symbols - Part 2: Form and use of arrows (ISO 80416-2:2001, MOD)

IEC 80416-3 Basic Rules for Graphical Symbols for Equipment Part 3: Application Guidelines (Basicprinciplesforgraphicalsym- bolsforuseoneequipment-Part 3:Guidelinesfortheapplicationofgraphicalsymbols)

Note: GB/T 23371:3-2009 Basic Rules for Graphical Symbols for Electrical Equipment Part 3: Application Guidelines (IEC 80416-3:2002, IDT)

3 Terms and Definitions

The following terms and definitions apply to this document:

3:1 symbol symbol graphicsymbol

A non-verbal visual image used to convey information:

Note 1: It can be made by drawing, printing or other means: Letters, numbers, and mathematical symbols can be used as symbols or symbolic elements: for some specific applications

Use letter groups (eg AUTO, STOP) as symbols or symbolic elements:

GB/T 8419 | GB/T 17300 | GB/T 16936 | GB/T 8595 | GB/T 8593.1 | GB/T 8590 | […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 98 pages — is available in the English PDF.

Referenced standards

Normative references

ISO 6405 · ISO 6165 · IEC 80416 · GB/T 23371 · ISO 80416 · GB/T 16902

Cited by

How to Download GB/T 8593.2-2021

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.