JB/T 6030-2001Construction machinery - General safety technical requirements (English PDF)
工程机械 通用安全技术要求
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 6030-2001 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
April 3, 2001
Implementation date
October 1, 2001
Scope
JB/T 6030-2001 is the English-translated version of 工程机械 通用安全技术要求.
JB/T 6030-2001 is the recommended Chinese machinery industry standard that sets the general safety technical requirements for construction machinery. It states the basic safety requirements to be observed in the design, manufacture, use and maintenance of these machines.
The standard applies to bulldozers, loaders, excavators, backhoe loaders, scrapers and graders, while other construction machinery products may follow it as a reference.
It quotes GB/T 8419-1987, GB/T 8420-2000, GB/T 8593.1-1998, GB/T 8593.2-1998, GB 16710.1-1996, GB/T 17299-1998, GB/T 17300-1998, GB/T 17771-1999, GB/T 17922-1999, JB 6028-1998 and JG/T 48-1999.
It replaced JB 6030-1992, JB 6029-1992 and JB 6027-1992. Issued on 3 April 2001, it has applied since 1 October 2001.
Found what you need?
Document preview — JB/T 6030-2001
National Standard of the People's Republic of China
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Type
- 3.2 Basic parameters
- 4 Types and basic parameters
- 4.1 Types
- 4.2 Model designation
- 4.3 Nominal operating conditions
- 4.4 Safety and hygiene
- 4.5 Welding
- 4.6 Bridge (After crane operation mechanism assembled)
- 4.7 Assembly
- 4.8 Electrical control equipment
- 4.9 Steel pretreatment and painting
- 5 Technical requirements
- 5.1 General requirements
- 5.2 Safety requirements
- 5.3 Cold and hot working forming
- 5.4 Rated load test
- 5.5 Whole machine noise test
- 5.6 Static rigidity test
- 5.7 Dynamic load test
- 5.8 Crane span deviation
- 5.9 Diagonal difference of bridge
- 6 Test methods
- 6.1 Exit-factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 7.1 Marking
- 7.2 Packaging, transportation and storage
- 7.3 Transportation
- 7.4 Storage
- 8 Marking, packaging, transportation and storage
- 9 标志和标签 9 Marking and labeling
1 Foreword
JB/T 6030-2001 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 3 April 2001 and has been in force since 1 October 2001.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is the recommended Chinese machinery industry standard that sets the general safety technical requirements for construction machinery. It states the basic safety requirements to be observed in the design, manufacture, use and maintenance of these machines. The standard applies to bulldozers, loaders, excavators, backhoe loaders, scrapers and graders, while other construction machinery products may follow it as a reference. It quotes GB/T 8419-1987, GB/T 8420-2000, GB/T 8593.1-1998, GB/T 8593.2-1998, GB 16710.1-1996, GB/T 17299-1998, GB/T 17300-1998, GB/T 17771-1999, GB/T 17922-1999, JB 6028-1998 and JG/T 48-1999. It replaced JB 6030-1992, JB 6029-1992 and JB 6027-1992.
JB/T 6030-2001 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 21,316 other JB/T standards.
Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.
3 Normative references
GB/T 8419-1987 — Earth-moving machinery--Operater seat--Vibration testing method and limiting levels
GB/T 8420-2000 — Earth-moving machinery-Human physical dimensions of operators and minimum operator space envelope
GB/T 8593.1-1998 — Earth-moving machinery--Symbols for operator controls and other display--Part 1: Common symbols
GB/T 8593.2-1998 — Earth-moving machinery--Symbols for operator controls and other display. Part 2: Specific symbols for machines, equipment and accessories
GB 16710.1-1996 — Earth-moving machinery--Noise limits
GB/T 17299-1998 — Earth-moving machinery. Minimum access dimensions
GB/T 17300-1998 — Earth-moving machinery--Access systems
GB/T 17771-1999 — Earth-moving machinery--Falling-object protective structures--Laboratory tests and performance requirements
GB/T 17922-1999 — Earth-moving machinery-Roll-over protective structures-Laboratory tests and performance requirements
JB/T 3249-1991 — Construction machinery - Guards and hoods
JB/T 3683-2001 — Earth-moving machinery - Zones of comfort and reach for controls
JB 6028-1998
JG/T 48-1999
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Classification and status
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 8419-1987Earth-moving machinery - Laboratory evaluation of operator seat vibration
- GB/T 8420-2000Earth-moving machinery -- Physical dimensions of operators and minimum operator space envelope
- GB/T 8593.1-1998Earth-moving machinery - Symbols for operator controls and other displays - Part 1: Common symbols
- GB/T 8593.2-1998Earth-moving machinery - Symbols for operator controls and other displays - Part 2: Symbols for specific machines, equipment and accessories
- GB 16710.1-1996Earth-moving machinery--Noise limits
- GB/T 17299-1998Earth-moving machinery. Minimum access dimensions
JG/T 48-1999
Similar standards
How to Download JB/T 6030-2001
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 6030-2001
$229.00