Valid

GB/T 45051-2024Earth-moving machinery - Battery electric non-road mining dumpers - Technical requirements (English PDF)

土方机械纯电动非公路矿用自卸车技术要求

Preview PDF

This is a limited preview

Buy now to download the full PDF (14 pages)

Need quotation for your management?

Get a formal quotation for GB/T 45051-2024 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

November 28, 2024

Implementation date

June 1, 2025

Scope

GB/T 45051-2024 is the English-translated version of 土方机械纯电动非公路矿用自卸车技术要求.

GB/T 45051-2024 is the Chinese standard "Earth-moving machinery - Battery electric non-road mining dumpers - Technical requirements".

Its scope clause reads: This document specifies the requirements, inspection rules, marking, packaging, transportation and storage of pure electric off-road mining dump trucks, and describes the corresponding Test method.

This document applies to pure electric off-road mining dump trucks (pure electric off-road mechanical transmission mining dump trucks and pure electric off-road electric transmission mining dump trucks Manufacturing and inspection of mobile mining dump trucks.

Found what you need?

Document preview — GB/T 45051-2024

National Standard of the People's Republic of China

ICS: 53.100
Classification: P 97

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Preface
1 Scope
2 Normative references
3 Terms and Definitions
4 Requirement
5 Test methods
6 Inspection Rules
7 Marking, packaging, transportation and storage
Appendix A (Informative) Main Parameters of Electric Dump Trucks

1 Scope

This document specifies the requirements, inspection rules, marking, packaging, transportation and storage of pure electric off-road mining dump trucks, and describes the corresponding

Test method.

Manufacturing and inspection of mobile mining dump trucks.

2 Normative references

The contents of the following documents constitute essential clauses of this document through normative references in this document.

For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to

This document.

GB/T 4094.2 Marking of electric vehicle controls, indicators and signal devices

GB/T 4208 Enclosure protection grade (IP code)

GB/T 8419 Laboratory evaluation of vibration of earth-moving machinery driver's seats

GB/T 8593.1 Symbols for operator controls and other display devices on earth-moving machinery Part 1.General symbols

GB/T 8593.2 Symbols for operator controls and other indicators on earth-moving machinery Part 2.Machines, working devices and accessories

Special symbols for items

GB/T 8595 Earth-moving machinery operator's controls

GB/T 14039-2002 Code for solid particle contamination level of hydraulic transmission oil

GB/T 16937 Earth-moving machinery driver's field of vision test method and performance criteria

GB/T 17299 Minimum inlet dimensions for earth-moving machinery

GB/T 17921 Earth-moving machinery seat belts and their anchors performance requirements and tests

GB 18384-2020 Safety requirements for electric vehicles

GB/T 19836 Electric vehicle instrumentation

GB/T 20178 General rules for safety labels for earth-moving machinery

GB/T 20234.2 Connection device for conductive charging of electric vehicles Part 2.AC charging interface

GB/T 20234.3 Connection device for conductive charging of electric vehicles Part 3.DC charging interface

GB/T 20234.4 Connection device for conductive charging of electric vehicles Part 4.High power DC charging interface

GB/T 20418 Lighting, signal and marking lights and reflectors for earth-moving machinery

GB/T 20953 Determination of combustion characteristics of interior materials for agricultural and forestry tractors and machinery

GB/T 21155 Test methods and performance criteria for sound warning devices and front horns of earth-moving machinery

GB/T 21935 Comfort zone and reach range for earth-moving machinery operation

GB/T 22359.1 Electromagnetic compatibility (EMC) of earth-moving machinery and construction machinery with built-in power supply Part 1.Typical

General requirements for EMC under electromagnetic environment conditions

GB/T 25606 Earthmoving machinery product identification code system

GB/T 25607 Definition and requirements of protective devices for earth-moving machinery

GB/T 44257.1 | GB/T 44257.2 | GB/T 41495 | GB/T 45047 | GB/T 45046 | […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 14 pages — is available in the English PDF.

Referenced standards

Normative references

Cited by

GB/T 45054-2024Earth-moving machinery - Battery electric non-road mining dumpers - Test methods

Editions of GB/T 45051

Edition	Title	Revision	Status
GB/T 45051-2024	Earth-moving machinery - Battery electric non-road mining dumpers - Technical requirements	current edition	Current

This page sells the current edition, GB/T 45051-2024. Earlier editions are listed for reference only.

How to Download GB/T 45051-2024

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.