GB/T 41855-2022Small amusement device—Carousel (English PDF)
小型游乐设施 转椅
This is a limited preview
Buy now to download the full PDF (21 pages)
Need quotation for your management?
Get a formal quotation for GB/T 41855-2022 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
October 14, 2022
Implementation date
February 1, 2023
Scope
GB/T 41855-2022 is the English-translated version of 小型游乐设施 转椅.
GB/T 41855-2022 is the Chinese national specification for the swivel-chair type of small amusement device.
It fixes the classification and models, the technical requirements and test methods, both the general ones and the special ones for each type of swivel chair, the factory and type inspection rules with sampling and judgement, the site requirements, installation, marking and use and maintenance instructions, and packaging, transport and storage; two normative annexes give the seat impact test and the coefficient of friction test, and an informative annex the modelling method.
It applies to swivel chairs in small amusement facilities for children aged 3 to 14 and does not apply to carousel rides. Issued on 14 October 2022, it has applied since 1 February 2023.
Found what you need?
Document preview — GB/T 41855-2022
National Standard of the People's Republic of China
- ICS
- 97.200.40
- Classification
- Y 57
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Preface
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 Classification and Model
- 4.1 Category
- 4.2 Type
- 5 Technical requirements and test methods
- 5.1 General requirements and test methods
- 5.2 Special requirements and test methods for different types of swivel chairs
- 6 Inspection rules
- 6.1 Factory inspection
- 6.2 Type inspection
- 6.3 Sampling and Judgment
- 7 Site requirements, installation, marking, use and maintenance instructions
- 8 Packaging, transportation and storage
- 8.1 Packaging
- 8.2 Transport
- 8.3 Storage
- Appendix A (informative) Modeling method for swivel chairs
- Appendix B (Normative) Seat Impact Test
- Appendix C (normative) Coefficient of friction test
- Reference
Foreword
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules of Standardization Documents" drafted.
1 Scope
This document specifies the classification and models of small amusement equipment swivel chairs, technical requirements and test methods, inspection rules, site requirements, installation, signs, use and maintenance instructions, packaging, transportation and storage.
This document applies to swivel chairs for small amusement facilities for children aged 3 to 14 years old. This document does not apply to carousel rides.
2 Normative references
The contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, dated citations documents, only the version corresponding to that date applies to this document; for undated references, the latest edition (including all amendments) applies to this document.
GB/T 191 Graphical signs of packaging, storage and transportation
GB/T 250 Textile color fastness test gray sample card for evaluating discoloration
GB/T 1040.1 Determination of Tensile Properties of Plastics Part 1: General
GB/T 1040.2 Determination of Tensile Properties of Plastics Part 2: Test Conditions for Molded and Extruded Plastics
GB/T 1766 Paint and varnish coating aging rating method
GB/T 1804-2000 General Tolerances Unmarked Tolerances of Linear and Angular Dimensions
GB/T 1843 Determination of Impact Strength of Plastic Izod Beams
GB/T 1865 Paints and varnishes Artificial weathering and artificial radiation exposure Filtered xenon arc radiation
GB/T 2411 Determination of indentation hardness (Shore hardness) using a durometer for plastics and hard rubber
GB/T 5226.1 Mechanical and Electrical Safety Mechanical and Electrical Equipment Part 1: General Specifications
GB 8408 Safety Specifications for Large Amusement Facilities
GB/T 9341 Determination of flexural properties of plastics
GB/T 16422.2 Plastic Laboratory Light Source Exposure Test Method Part 2: Xenon Arc Lamp
GB/T 20306 Terms of Amusement Facilities
GB/T 28622-2012 Terms for unpowered amusement facilities
GB/T 34021-2017 Small amusement equipment rocking horse and seesaw
GB/T 34272 Safety Specification for Small Amusement Facilities
3 Terms and Definitions
The terms and definitions defined in GB/T 20306 and GB/T 28622-2012 and the following terms and definitions apply to this document.
3.1 Swivel chair carousel
Small rides that rotate around a central axis for single or multi-person use. [Source: GB/T 28622-2012, 5.1, with modifications]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 21 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191Graphical symbols marking for handling and storage of packages
- GB/T 250Textiles -- Tests for colour fastness -- Grey scale for assessing change in colour
- GB/T 1040.1Plastics - Determination of tensile properties - Part 1: General principles
- GB/T 1040.2Plastics – Determination of Tensile Properties – Part 2: Test Conditions for Moulding and Extrusion Plastics
- GB/T 1766Paints and Varnishes – Rating Schemes of Degradation of Coats
- GB/T 1804-2000General tolerances - Tolerances for linear and angular dimensions without individual tolerance indications
Similar standards
How to Download GB/T 41855-2022
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 8408-2018 — Large-scale amusement device safety code
GB/T 1040.1-2025 — Plastics - Determination of tensile properties - Part 1: General principles
GB/T 1040.2-2022 — Plastics – Determination of Tensile Properties – Part 2: Test Conditions for Moulding and Extrusion Plastics
Secure payment via Stripe
Payments accepted
GB/T 41855-2022
$360.00