GB/T 40775-2021Technical specification for eco-design product assessment—Luminaries (English PDF)

Foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules of Standardization Documents" Drafting.

1 Scope

This document stipulates the evaluation principles, methods and basis of eco-design products of lamps, the basic requirements of manufacturers and the evaluation guidelines for products. Standard requirements.

This document is applicable to the evaluation of eco-design products of lamps and lanterns, mainly including indoor LED lighting lamps, such as flat panel lights, strip lights, ball Bulb lights, ceiling lights, grille lights, spotlights, downlights, etc. Refer to this document for the evaluation of other luminaire eco-design products.

Note: In this document, lighting products are collectively referred to as "products".

2 Normative references

The content of the following documents constitutes an indispensable clause of this document through normative references in the text. Among them, dated quotations Only the version corresponding to the date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to this document.

GB 7000.1-2015 Lamps Part 1: General requirements and tests

GB/T 16288 Marking of plastic products

GB/T 18455 Packaging Recycling Mark

GB/T 19001 Quality Management System Requirements

GB/T 24001 Environmental Management System Requirements and Guidelines for Use

GB/T 24040 Environmental Management Life Cycle Assessment Principles and Framework

GB/T 24044 Environmental Management Life Cycle Assessment Requirements and Guidelines

GB/T 24824 Test method of LED module for general lighting

GB/T 26572 Limit requirements for restricted substances in electronic and electrical products

GB/T 29786 Determination of Phthalates in Electronic and Electrical Products Gas Chromatography-Mass Spectrometry

GB 30255-2019 Energy efficiency limit values and energy efficiency grades of LED products for indoor lighting

GB/T 31268 General Rules for Restricting Excessive Packaging of Goods

GB/T 32161-2015 General Rules for Evaluation of Eco-design Products

GB/T 34664-2017 General Rules for Evaluation of Electronic and Electrical Eco-design Products

GB 37478-2019 Road and tunnel lighting LED lamps energy efficiency limit values and energy efficiency grades

GB/T 37840 Determination of Volatile Organic Compounds in Electronic and Electrical Products Gas Chromatography-Mass Spectrometry

GB 38450-2019 Energy efficiency limit values and energy efficiency grades of LED panel lights for general lighting

GB/T 39560 (all parts) Determination of certain substances in electrical and electronic products

GB/T 45001 Occupational Health and Safety Management System Requirements and Guidelines for Use

IEC 62321 (all parts) Determination of certain substances in electrical and electronic products (Determination of certain substances in electrotechnicalproducts)

IEC /T R62635 Manufacturers and recyclers of electrical and electronic products provide end-of-life information and calculate the recyclability of products Rate of guidelines (Guidelinesforend-of-lifeinformationprovidedbymanufacturersandrecyclersandforrecy-clabilityratecalculationofelectricalandelectronicequipment)

IEEE1789 IEEE recommended measures for modulation current of high-brightness LEDs to reduce the health risks of observers