GB/T 40096.4-2021Technical specification for on-site protection equipment—Part 4: Smart management unit (English PDF)
就地化继电保护装置技术规范 第4部分：智能管理单元
This is a limited preview
Buy now to download the full PDF (35 pages)
Need quotation for your management?
Get a formal quotation for GB/T 40096.4-2021 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
May 21, 2021
Implementation date
December 1, 2021
Scope
GB/T 40096.4-2021 is the English-translated version of 就地化继电保护装置技术规范 第4部分：智能管理单元.
GB/T 40096.4-2021 is the Chinese standard "Technical specification for on-site protection equipment—Part 4: Smart management unit".
Its scope clause reads: This part of GB/T 40096 specifies the in-situ relay protection intelligent management unit for voltage levels of 110kV and below (hereinafter referred to as smart Capable of management unit) technical requirements, test methods, inspection rules and requirements for signs, packaging, transportation, storage, etc. This part is applicable to the research of the in-situ relay protection intelligent management unit (hereinafter referred to as the intelligent management unit) for voltage levels of 110kV and below System, design, manufacture, test, inspection and application. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 40096.4-2021
National Standard of the People's Republic of China
- ICS
- 29.240
- Classification
- K 45
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 Environmental conditions
- 4.2 Rated electrical parameters
- 4.3 General requirements
- 4.4 Technical Principle
- 4.5 Basic functional requirements
- 4.6 Requirements for advanced features
- 4.7 Power consumption
- 4.8 Insulation requirements
- 4.9 Humidity and heat resistance
- 4.10 Mechanical properties
- 4.11 Electromagnetic compatibility performance
- 4.12 Continuous power-on
- 4.13 Structure and appearance
- 4.14 Safety requirements
- 4.15 Functional performance
- 5 Test method
- 5.1 Test conditions
- 5.2 Environmental impact test
- 5.3 Power influence test
- 5.4 Device function and performance test
- 5.5 Power consumption test
- 5.6 Insulation performance test
- 5.7 Humidity and heat resistance test
- 5.8 Mechanical performance test
- 5.9 Electromagnetic compatibility performance test
- 5.10 Continuous power-on test
- 5.11 Communication interface test
- 5.12 Structural and visual inspection
- 5.13 Safety requirements test
- 6 Inspection rules
- 6.1 Inspection classification
- 6.2 Factory inspection
- 6.3 Type inspection
- 7 Marking, packaging, transportation and storage
- 7.1 Sign
- 7.2 Packaging
- 7.3 Transportation
- 7.4 Storage
- 8 other
- 8.1 Product accompanying documents
- 8.2 Device design life index
- 8.3 Quality assurance period
- Appendix A (informative appendix) Agent communication mode of intelligent management unit
- Appendix B (informative appendix) Intelligent management unit modeling requirements
- Appendix C (informative appendix) Intelligent management unit network structure
- Appendix D (normative appendix) Operation log
- Appendix E (informative appendix) Inspection report format
- Appendix F (informative appendix) Process level automatic configuration rules
- Appendix G (Normative Appendix) Intelligent Management Unit Detection Method
1 Scope
This part of GB/T 40096 specifies the in-situ relay protection intelligent management unit for voltage levels of 110kV and below (hereinafter referred to as smart
Capable of management unit) technical requirements, test methods, inspection rules and requirements for signs, packaging, transportation, storage, etc.
This part is applicable to the research of the in-situ relay protection intelligent management unit (hereinafter referred to as the intelligent management unit) for voltage levels of 110kV and below
System, design, manufacture, test, inspection and application.
2 Normative references
The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this article
Pieces. For undated reference documents, the latest version (including all amendments) is applicable to this document.
GB/T 191 Packaging, storage and transportation pictorial signs
GB/T 2887-2011 General Specification for Computer Site
GB/T 4798.2 Environmental conditions for the application of electrical and electronic products Part 2.Transportation
GB/T 7261-2016 Basic test methods for relay protection and safety automatic devices
GB/T 11287-2000 Electrical Relay Part 21.Measuring the vibration, shock, collision and earthquake of relays and protection devices
Test Part 1.Vibration Test (Sine)
GB/T 13384 General technical conditions for packaging of mechanical and electrical products
GB/T 14537-1993 Impact and collision test of measuring relays and protection devices
GB/T 14598.2-2011 Measuring Relays and Protection Devices Part 1.General Requirements
GB/T 14598.3-2006 Electrical Relay Part 5.Insulation coordination requirements and tests for measuring relays and protection devices
GB/T 14598.26-2015 Measuring Relays and Protection Devices Part 26.Electromagnetic Compatibility Requirements
GB/T 14598.27-2017 Measuring Relays and Protection Devices Part 27.Product Safety Requirements
GB/T 17626.9-2011 Electromagnetic compatibility test and measurement technology Pulse magnetic field immunity test
GB/T 17626.10-2017 Electromagnetic compatibility test and measurement technology Damped oscillation magnetic field immunity test
GB/T 40096.1 Technical specification for in-situ protection relay devices Part 1.General technical conditions
DL/T 478-2013 General technical requirements for relay protection and safety automatic devices
DL/T 860 (all parts) Power automation communication network and system
DL/T 1455-2015 Power system control software safety and its evaluation technical requirements
DL/T 1782-2017 Information Specification for Substation Relay Protection
3 Terms and definitions
The terms and definitions defined in DL/T 860 (all parts) and GB/T 40096.1 apply to this document.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 35 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191Graphical symbols marking for handling and storage of packages
- GB/T 2887-2011General specification for computer field
- GB/T 4798.2Classification of environmental conditions - Classification of groups of environmental parameters and their severities - Part 2: Transportation and handling
- GB/T 7261-2016Basic test methods for protection relays and security automatic equipment
- GB/T 11287-2000Electrical relays. Part 21: Vibration, shock, bump and seismic tests on measuring relays and protection equipment. Section one: Vibration tests (sinusoidal)
- GB/T 13384General specifications for packing of mechanical and electrical product
GB/T 14598.3-2006 · DL/T 478-2013 · DL/T 860
Similar standards
How to Download GB/T 40096.4-2021
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
DL/T 1455-2015 — Technical Requipments of Safety and Security for Electric Power System Control Software and Software Testing
DL/T 1782-2017 — Information specification of substation relay protection
DL/T 860.10-2018 — Communication networks and systems for power utility automation -Part 10: Conformance testing
Secure payment via Stripe
Payments accepted
GB/T 40096.4-2021
$650.00