GB/T 39084-2020Green product assessment-Packings for express service (English PDF)

3.1 Envelope for express service

An envelope-type packing product which is produced by cardboard as the main raw material, through die-cutting, printing and gluing, for the purposes of loading with express mail during the delivery process. [Source: GB/T 16606.1-2018, 3.1]

3.2 Packing box for express service

A box-type packing product which is produced by cardboard as the main raw material, through die-cutting, creasing, printing, etc., for the purpose of loading with express during the delivery process. container bags, which are made of natural and chemical fibers such as polyester, polyester cotton, cotton-linen as raw materials.

5.1 Basic requirements

5.1.1 For the emission of pollutants from the manufacturers of packing products for express services, it shall meet the requirements of relevant environmental protection laws and regulations; it shall meet the requirements of national and local pollutant emission standards and total volume control indicators. There have been neither major safety accidents nor major environmental pollution incidents in the past three years.

5.1.2 For the manufacturers of packing products for express services, they shall adopt advanced technologies and techniques encouraged by the state.

However, they shall not use abandoned or prohibited technologies, techniques, equipment or related substances which are indicated in the release by the state or relevant authorities.

5.1.3 Manufacturers of packing products for express services shall have a special place to store solid waste generated during the production process, thereby avoiding the scattering, loss and leakage; reduce the generation amount and hazards of solid waste; carry out harmless disposal and resource utilization of solid waste.

5.1.4 Manufacturers of packing products for express services should, in according with GB/T 24001-2016, GB/T 23331-2012, GB/T 19001-2016, GB/T 45001-2020, etc. establish and operate environmental management systems, energy management systems, quality management system, occupational health and safety management system.

5.1.5 Manufacturers of packing products for express services shall, in accordance with the requirements of GB 17167, be equipped with energy measuring instruments. Meanwhile, it shall be equipped with pollutant detection and online monitoring equipment in accordance with environmental protection laws, regulations and standards.

5.1.6 For the different types of packing products which are produced by manufacturers of packing products for express services, they shall meet the relevant product standard requirements, including but not limited to the following:

- The envelope shall meet the requirements of GB/T 16606.1;

- The packing box shall meet the requirements of GB/T 16606.2; the honeycomb cardboard box shall also meet the requirements of BB/T 0016;

- The packing bag shall meet the requirements of GB/T 16606.3;

- The fillers and suspended fastening packing shall meet the requirements of YZ/T 0166;

- The electronic waybill shall use a bottomless paper-type one-page form, which meets the relevant requirements in YZ/T 0148;

- The tape shall use biodegradable tape, which meets the requirements of YZ/T 0160.2;

- The container bags for express services shall meet the requirements of YZ/T 0167;

- The reusable packing products for express services shall, in addition to meeting the relevant product standards, also meet the relevant requirements of GB/T 16716.3-2018.

5.1.7 Packing products for express services shall meet the requirements of national and local plastic reduction and restriction policies. Meanwhile, on the premise of satisfying the use functions of product, it shall adopt reduced, reusable, recyclable designs.

5.2 Assessment index requirements

5.2.1 Paper packing products for express services

The assessment index requirements for envelopes, packing boxes, paper fillers, electronic waybills are as shown in Table 1. The assessment index requirements for other paper express packing products shall meet the requirements of GB/T 35613. […]