GB/T 37519-2019Grain and oil machinery - Bucket elevators (English PDF)
粮油机械 斗式提升机
This is a limited preview
Buy now to download the full PDF (30 pages)
Need quotation for your management?
Get a formal quotation for GB/T 37519-2019 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
May 10, 2019
Implementation date
December 1, 2019
Scope
GB/T 37519-2019 is the English-translated version of 粮油机械 斗式提升机.
China's national standard for bucket elevators in grain and oil processing. It specifies the terms and definitions, the working principle, the classification, the models and basic parameters, the technical requirements and the testing.
A bucket elevator is a belt or chain carrying buckets in a vertical loop inside two casings, and it is how grain gets from ground level to the top of a silo or a mill.
There is no better way to lift bulk material vertically - a screw conveyor is inefficient and a pneumatic system damages the grain and consumes far more power. What makes it a machine that needs a standard is that it is also the most dangerous item in a grain facility.
It is a tall enclosed column full of dust in suspension, containing a belt running over pulleys that can slip and heat, and it is historically where grain elevator explosions start.
The requirements on belt alignment, bearing temperature monitoring, speed sensing and explosion venting follow directly from that.
Found what you need?
Document preview — GB/T 37519-2019
National Standard of the People's Republic of China
- ICS
- 67.260
- Classification
- X 91
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009. Please note that some of the contents of this document may involve patents. Publication of this document The organization does not assume responsibility for identifying these patents. This standard was proposed by the National Grain and Material Reserve Bureau. This standard is under the jurisdiction of the National Grain and Oil Standardization Technical Committee (SAC/TC270). This standard was drafted. Zhengzhou COFCO Research and Design Institute Co., Ltd., Suzhou Jiesai Machinery Co., Ltd., Zhenjiang three-dimensional transport equipment Co., Ltd., Jiangsu Fuchang Machinery Equipment Co., Ltd., Jiangsu Muyang Fengshang Steel Warehouse Engineering Co., Ltd., Jiangmen Southern Transportation Machinery Engineering Co., Ltd., Hubei Yidu Yunji Electromechanical Co., Ltd., Zhenjiang Xinhengtong Transportation Equipment Co., Ltd., Hebei Pingle Flour Machinery Group Co., Ltd., Jiangsu Guoliang Storage Engineering Co., Ltd., Yidu Huaxun Intelligent Transportation Co., Ltd. The main drafters of this standard. Zhang Zhuoqing, Sun Huinan, Ji Chunhua, Chen Xu, Zhang Junling, Li Guangqian, Chen Hongbin, Qian Hangsong, Ren Shouhua, Li Xingang, Wang Binxing, Liang Zhenhong, Wang Chuanping, Man Zaidong, Hao Zhiyong, Qian Qingfeng, Yang Wenli, Li Xianhua. Grain and oil machinery bucket elevator
1 Scope
China's national standard for bucket elevators in grain and oil processing. It specifies the terms and definitions, the working principle, the classification, the models and basic parameters, the technical requirements and the testing. A bucket elevator is a belt or chain carrying buckets in a vertical loop inside two casings, and it is how grain gets from ground level to the top of a silo or a mill. There is no better way to lift bulk material vertically - a screw conveyor is inefficient and a pneumatic system damages the grain and consumes far more power. What makes it a machine that needs a standard is that it is also the most dangerous item in a grain facility. It is a tall enclosed column full of dust in suspension, containing a belt running over pulleys that can slip and heat, and it is historically where grain elevator explosions start. The requirements on belt alignment, bearing temperature monitoring, speed sensing and explosion venting follow directly from that.
This standard specifies the terms and definitions, working principle, classification, model and basic parameters, technical requirements, and test of grain and oil machinery bucket elevators. Test methods, inspection rules, signs and packaging, transportation and storage. This standard is applicable to bucket elevators that continuously transport various grain materials vertically.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this document. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 191 packaging storage and transportation icon
GB/T 1184-1996 Shape and position tolerances without tolerance values
GB/T 2828.1. Sampling procedures for sampling by sampling - Part 1 . Batch-to-batch sampling plan, searched by AQL
GB 2894 safety signs and guidelines for their use
GB/T 3098.1 Fastener mechanical properties bolts, screws and studs
GB/T 3098.6 Mechanical properties of fasteners Stainless steel bolts, screws and studs
GB/T 3768 Acoustic sound pressure method for the determination of noise source sound power level and sound energy level using the envelope measurement surface above the reflection surface Easy law
GB 5226.1 Mechanical electrical safety machinery and electrical equipment - Part 1. General technical conditions
GB/T 5491 Inspection of food and oil materials, sampling method
GB/T 5494 grain and oil inspection of impurities in food and oil, imperfect grain inspection
GB/T 7984 general purpose fabric core conveyor belt
GB/T 8874 Grain and oil general technology, equipment terminology
GB/T 9286 color and varnish paint film cross-cut test GB/T 13306 signage
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 30 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191Graphical symbols marking for handling and storage of packages
- GB/T 1184-1996Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
- GB/T 2828.1Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
- GB 2894Safety colours and safety signs
- GB/T 3098.1Mechanical properties of fasteners - Bolts, screws and studs
- GB/T 3098.6Mechanical properties of fasteners - Stainless steel bolts, screws and studs
GB 5226.1
Cited by
- GB 17918-2025Safety specification for dust explosion protection in bulk grain loading and unloading system in port
- GB/T 46299-2025Grain and oil machinery - Continuous-flow / batch type recirculating grain dryer
- GB/T 46669-2025Grain and oils storage - Technical specification for grain breakage reduction in silo loading
- GB/T 46675-2025Grain and oil machinery - Integrated equipment of raw grain cleaning center
- GB/T 6970-2025Testing methods for grain driers
How to Download GB/T 37519-2019
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 17440-2025 — Safety specification for the protection of dust explosion for grain processing,storage and transportation system
GB 2894-2025 — Safety colours and safety signs
GB 50057-2010 — Code for design protection of structures against lightning
Secure payment via Stripe
Payments accepted
GB/T 37519-2019
$195.00