GB/T 36515-2018Concrete product machinery—Safety requirements for block making machines (English PDF)

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009.

1 Scope

This standard specifies the terms and definitions of safety of concrete block forming machines, major risk classifications, safety requirements and safety measures.

This standard applies to building blocks, curbs, paving bricks and concrete block forming machines like concrete products.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this document. For undated references, the latest edition (including all amendments) applies to this document.

General rules and safety requirements for GB/T 3766 hydraulic drive systems and their components

GB/T 3768 Acoustic sound pressure method for the determination of noise source sound power level and sound energy level using the envelope above the reflection surface to measure the surface Easy law

GB 5226.1 Mechanical electrical safety machinery and electrical equipment - Part 1. General technical conditions

GB/T 7932 Pneumatic pairing system and its components general rules and safety requirements

GB/T 9969 General guidelines for the use of industrial products

GB/T 12265.3 Mechanical safety to avoid the minimum spacing of various parts of the human body

GB/T 15706 Mechanical Safety Design General Risk Assessment and Risk Reduction

GB/T 16754 mechanical safety emergency stop design principle

GB/T 16855.1 Safety of mechanical safety systems - Part 1. General rules

GB/T 17248.5 Measurement of sound pressure levels emitted by acoustic machines and equipment and other specified positions Environmental amendment

GB/T 18569.1 Mechanical safety to reduce the risk to health of hazardous substances emitted by machinery Part 1. For mechanical systems Manufacturer's principles and norms

GB/T 18717.1 Ergonomic design for mechanical safety - Part 1. s

GB/T 18717.2 Ergonomic design for mechanical safety - Part 2 in principle

GB/T 18717.3 Ergonomic design for mechanical safety - Part 3. Anthropometric data

GB/T 19670 mechanical safety to prevent accidental start

GB/T 23821 mechanical safety to prevent the upper and lower limbs from reaching the safe distance of the danger zone

3 Terms and definitions

The following terms and definitions apply to this document.