GB/T 36139-2018Grain and oil machinery—Editorial nominating method for model designation (English PDF)
粮油机械 产品型号编制方法
This is a limited preview
Buy now to download the full PDF (27 pages)
Need quotation for your management?
Get a formal quotation for GB/T 36139-2018 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
May 14, 2018
Implementation date
December 1, 2018
Scope
GB/T 36139-2018 is the English-translated version of 粮油机械 产品型号编制方法.
GB/T 36139-2018 sets out how model designations are compiled for grain and oil machinery products. A model is built from a professional code, a category code, a type code, the main specifications and an improved design serial number, and it should reflect the product's specialty, category, structure, specifications and improvement.
The standard applies to grain and oil machinery products in general; weighing models cover the scales used in the production process, while other scales follow GB/T 26389.
Its terms are taken from the grain and oil terminology standards, among them GB/T 8872, GB/T 8873, GB/T 8874, GB/T 8875, GB/T 22515, GB/T 26631 and GB/T 26632. Manufacturers use it so that machine designations are compiled in the same way across the sector. It was issued on 14 May 2018 and has applied since 1 December 2018.
Found what you need?
Document preview — GB/T 36139-2018
National Standard of the People's Republic of China
- ICS
- 67.260
- Classification
- X 91
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Model preparation method
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
1 Scope
This standard specifies the preparation method of common grain and oil machinery product models.
This standard applies to grain and oil machinery products.
Weighing models are applicable to the scales used in the production process, and other scales are subject to the provisions of GB/T 26389.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this document. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 8872 Grain and oil terminology milling industry
GB/T 8873 Grain and oil terminology
GB/T 8874 Grain and oil general technology, equipment terminology
GB/T 8875 grain and oil terminology rice milling industry
GB/T 22515 Grain and oil terminology, grain, oil and processed products
GB/T 26389 weighing instrument product model preparation method
GB/T 26631 Grain and oil terminology physical and chemical properties and quality
GB/T 26632 Grain and oil terminology, grain and oil storage equipment and facilities
3 Terms and definitions
GB/T 8872, GB/T 8873, GB/T 8874, GB/T 8875, GB/T 22515, GB/T 26389, GB/T 26631 and the terms and definitions defined in GB/T 26632 apply to this document.
4 Model preparation method
4.1 Compilation principles
4.1.1 General principles
The grain and oil machinery product model should reflect the main information of the product's specialty, category, structure, specifications and improvement.
4.1.2 Composition of grain and oil machinery product models
It consists of professional code, category code, type code, main specifications and improved design number. The method is as follows.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 27 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 8872Terminology of grain and oils - Flour milling industry
- GB/T 8873Terminology of grain and oils - Oils and fats industry
- GB/T 8874General terminology of technology and equipment for grain and oils industry
- GB/T 8875Termnology of grain and oils - Rice milling
- GB/T 22515Terminology of grain and oil - Grain and oil-bearing material and their prouducts
- GB/T 26389Method of classified type of weighing instrument products
Cited by
- GB/T 26885-2025Grain and oil machinery - Sweep augers
- GB/T 46674-2025Grain and oil machinery - Auger discharger
- GB/T 46675-2025Grain and oil machinery - Integrated equipment of raw grain cleaning center
- GB/T 46677-2025Grain and oil machinery - Valves
- GB/T 46678-2025Grain and oil machinery - Testing equipment for paddy quality grading during procurement
- GB/T 17913-2024Grain and oils storage - Phosphine recirculation fumigation equipment
Similar standards
How to Download GB/T 36139-2018
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 22515-2008 — Terminology of grain and oil - Grain and oil-bearing material and their prouducts
GB/T 26389-2011 — Method of classified type of weighing instrument products
GB/T 26631-2011 — Grain and oil terminology - Physicochemical properties and quality
Secure payment via Stripe
Payments accepted
GB/T 36139-2018
$475.00