GB/T 34923.4-2017Street lights control and management system—Part 4: Technical specification of street lights controller (English PDF)
路灯控制管理系统 第4部分:路灯控制器技术规范
This is a limited preview
Buy now to download the full PDF (21 pages)
Need quotation for your management?
Get a formal quotation for GB/T 34923.4-2017 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
November 1, 2017
Implementation date
May 1, 2018
Scope
GB/T 34923.4-2017 is the English-translated version of 路灯控制管理系统 第4部分:路灯控制器技术规范.
GB/T 34923.4-2017 is the Chinese standard "Street lights control and management system—Part 4: Technical specification of street lights controller". Its scope clause reads: This section GB/T 34923 specifies the technical requirements of street light controllers, test methods and inspection rules.
This section applies to the manufacture, inspection, acceptance and use of street light controllers. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 34923.4-2017
National Standard of the People's Republic of China
- ICS
- 29.140.99
- Classification
- K 73
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Preface
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 classification and type identification code
- 5 technical requirements
- 6 test methods
- 7 Inspection rules
- 8 signs, transport, storage
1 Scope
This section GB/T 34923 specifies the technical requirements of street light controllers, test methods and inspection rules.
This section applies to the manufacture, inspection, acceptance and use of street light controllers.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this article
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 2829-2002 periodic inspection count sampling procedures and tables (for the stability of the test process)
GB/T 4208-2008 enclosure protection (IP code)
GB/T 2423.1-2008 Environmental testing for electric and electronic products Part 2. Test methods Test A. Low temperature
GB/T 2423.2-2008 Environmental testing for electric and electronic products Part 2. Test methods Test B. High temperature
GB/T 2423.4-2008 Environmental testing for electric and electronic products Part 2. Test methods Test Db. Alternating hot and humid (12h
12h cycle)
GB/T 2423.10-2008 Environmental testing for electric and electronic products Part 2. Test methods Test Fc. Vibration (sinusoidal)
GB/T 5080.7-1986 Equipment reliability test Constant failure rate assumption failure rate and mean time to failure test
Experience program
GB/T 5169.11-2006 Fire hazard testing for electric and electronic products Part 11 - Glow/hot wire basic test methods into
Glowing wire flammability test methods
GB/T 16935.1-2008 Insulation coordination of equipment in low-voltage systems - Part 1. Principles, requirements and tests
Electromagnetic compatibility (EMC) test and measurement techniques Electrostatic discharge (IMD) immunity test
GB/T 17626.3-2006 Electromagnetic compatibility test and measurement techniques RF electromagnetic field radiation immunity test
GB/T 17626.4-2008 Electromagnetic compatibility test and measurement technology Electrical fast transient burst immunity test
GB/T 17626.5-2008 Electromagnetic compatibility test and measurement techniques surge (impact) immunity test
GB/T 17626.6-2008 Electromagnetic compatibility test and measurement techniques RF field induced conduction disturbances immunity
GB/T 17626.11-2008 Electromagnetic compatibility test and measurement techniques Voltage sag, short interruptions and voltage variations Immunity test
Electromagnetic compatibility (EMC) - Tests and measurement techniques - Oscillation wave immunity test
GB/T 17215.211-2006 AC measuring equipment - General requirements, test and test conditions - Part 11. Measuring equipment
GB/T 17215.321-2008 AC measuring equipment - Particular requirements - Part 21. Static active watthour meter (Class 1 and level 2)
GB/T 34923.1-2017 Street lighting control management system - Part 1. General
Street lighting control management system - Part 6. Technical specifications for communication protocols
3 Terms and definitions
GB/T 34923.1-2017 defined and the following terms and definitions apply to this document.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 21 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 2829-2002Sampling procedures and tables for periodic inspection by attributes
- GB/T 4208-2008Degrees of protection provided by enclosures (IP code)
- GB/T 2423.1-2008Environmental testing for electric and electronic products - Part 2: Test methods - Tests A: Cold
- GB/T 2423.2-2008Environmental testing for electric and electronic products - Part 2: Test methods - Tests B: Dry heat
- GB/T 2423.4-2008Environmental testing for electric and electronic products - Part 2: Test method - Test Db: Damp heat, cyclic (12 h + 12 h cycle)
- GB/T 2423.10-2008Environmental testing - Part 2: Test methods - Test Fc: Vibration (sinusoidal)
Similar standards
How to Download GB/T 34923.4-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 2423.1-2008 — Environmental testing for electric and electronic products - Part 2: Test methods - Tests A: Cold
GB/T 2423.2-2008 — Environmental testing for electric and electronic products - Part 2: Test methods - Tests B: Dry heat
GB/T 2423.4-2008 — Environmental testing for electric and electronic products - Part 2: Test method - Test Db: Damp heat, cyclic (12 h + 12 h cycle)
Secure payment via Stripe
Payments accepted
GB/T 34923.4-2017
$355.00